Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

​

Commission file number: 001-13122

Reliance, Inc.

(Exact name of registrant as specified in its charter)

​

16100 N. 71st Street, Suite 400

Scottsdale, Arizona 85254

(Address of principal executive offices, including zip code)

(480) 564-5700

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒  No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐  No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒  No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒  No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐  No ☒

The aggregate market value of the voting stock held by non-affiliates of the registrant, based on the closing price on the New York Stock Exchange on June 30, 2023 was approximately $15,790,000,000. For purposes of this computation, it is assumed that the shares of voting stock held by directors and officers would be deemed to be stock held by affiliates. As of February 23, 2024, 57,425,425 shares of the registrant’s common stock, $0.001 par value, were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive Proxy Statement for the 2024 annual meeting of stockholders to be held on May 15, 2024 are incorporated by reference in Part III.

​

​

Table of Contents

INDEX

​

​

​

i

Table of Contents

FORWARD-LOOKING STATEMENTS

​

In February 2024, we changed our corporate name from Reliance Steel & Aluminum Co. to Reliance, Inc. We will not distinguish between our prior and current corporate name and will refer to our current corporate name throughout this Annual Report on Form 10-K. Unless otherwise indicated or required by the context, as used in this Annual Report on Form 10-K, the terms “Company,” “Reliance,” “we,” “our,” and “us” refer to Reliance, Inc. (formerly Reliance Steel & Aluminum Co.) and all of its subsidiaries that are consolidated in accordance with U.S. generally accepted accounting principles. This Annual Report on Form 10-K and the information incorporated by reference contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. We may also provide oral or written forward-looking information in other materials we release to the public. Our forward-looking statements may include, but are not limited to, discussions of our industry and end markets, our business strategies and our expectations concerning future demand and major commodity product pricing and our results of operations, margins, profitability, taxes, liquidity, macroeconomic conditions, including inflation and slowing macroeconomic growth, litigation matters and capital resources. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “explore,” “estimate,” “predict,” “potential,” “preliminary,” “range,” “intend” and “continue,” the negative of these terms, and similar expressions. All statements contained in this report that are not statements of historical fact are forward-looking statements. These forward-looking statements are based on management’s estimates, projections and assumptions as of the date of such statements. These risks and other factors include those described in “Risk Factors” (Part I, Item 1A of this Form 10-K) and “Quantitative and Qualitative Disclosures about Market Risk” (Part II, Item 7A). In addition, other factors of which the Company is not currently aware may affect the accuracy of our forward-looking information and may cause actual results to differ from those discussed.

​

Forward-looking statements involve known and unknown risks and uncertainties and are not guarantees of future performance. Actual outcomes and results may differ materially from what is expressed or forecasted in these forward-looking statements as a result of various important factors, including, but not limited to, actions taken by us, as well as developments beyond our control, including, but not limited to, the impacts of labor constraints and supply chain disruptions and changes in domestic and worldwide political and economic conditions such as inflation, a prolonged higher interest rate environment and slowing macroeconomic growth that could materially impact us, our customers and suppliers and demand for our products and services. Risks and uncertainties related to the proposed American Alloy Steel, Inc. transaction include, but are not limited to, delays in or failure to obtain any required governmental and regulatory approvals. Deteriorations in economic conditions, as a result of inflation, elevated interest rates, economic recession, slowing growth, outbreaks of infectious disease, conflicts such as the war in Ukraine and the evolving events in Israel and Gaza or otherwise, could lead to a decline in demand for our products and services and negatively impact our business, and may also impact financial markets and corporate credit markets which could adversely impact our access to financing, or the terms of any financing.

​

We do not assume any responsibility to publicly update any of our forward-looking statements regardless of whether factors change as a result of new information, future events, or for any other reason, except as may be required by law. You should not place undue reliance on forward-looking statements, which speak only as of the date they are made. You should review any additional disclosures we make in our press releases and other documents we file or furnish with the United States Securities and Exchange Commission (the “SEC”), including our Forms 10-Q and 8-K.

​

This Annual Report on Form 10-K includes registered trademarks, trade names and service marks of the Company and its subsidiaries.

​

​

ii

Table of Contents

PART I

​

Item 1.  Business

​

We are a network of companies providing diversified metal solutions and the largest metals service center company in North America (U.S. and Canada) based on revenues, with 2023 net sales of $14.81 billion.

​

We have been in business 85 years since our original organization on February 3, 1939, operating a single metals service center in Los Angeles, California fabricating steel reinforcing bar. We reincorporated in the State of Delaware in 2015. In February 2024, we changed our corporate name to Reliance, Inc. from Reliance Steel & Aluminum Co. Our common stock has traded on the New York Stock Exchange (“NYSE”) under the symbol “RS” for approximately 30 years since our September 16, 1994 initial public offering.

​

We believe we have a unique and sustainable business model predicated on the following key attributes:

​

As of December 31, 2023, we operated through a network of over 315 locations in 40 U.S. states and 12 foreign countries. We distribute a full line of over 100,000 metal products, including alloy, aluminum, brass, copper, carbon steel, stainless steel, titanium and other specialty steel products.

​

We have more than 125,000 customers in a variety of industries, including general manufacturing, non-residential construction (including infrastructure and renewable energy), transportation (rail, truck trailer and shipbuilding), aerospace (commercial; military, defense and space), energy (oil and natural gas), electronics and semiconductor fabrication, and heavy industry (agricultural, construction and mining equipment). We also service the auto industry, primarily through our toll processing operations where we process the metal for a fee, without taking ownership of the metal.

​

We believe that our diversification by product, end market and geography helps mitigate volatility in metals pricing and changing end market conditions. We are not dependent on any particular customer or industry because we process and distribute a variety of metals. This diversity of product type and material reduces our exposure to fluctuations or other weaknesses in the financial stability of particular customers or industries. We are also less dependent on any particular suppliers as a result of our product diversification. As a result, we have remained profitable every year, even during recessionary periods and a global pandemic, since our initial public offering in 1994.

​

We believe that our focus on servicing customers with small order sizes and quick turnaround, along with our growth and diversification strategy, has been instrumental in our ability to produce industry-leading operating results among publicly traded metals service center companies in North America. In 2023, approximately 98% of our orders were from repeat customers and we delivered approximately 40% of our orders within 24 hours.

​

We provide a wide variety of processing services to meet our customers’ specifications and deliver products to fabricators, manufacturers and other end users. We believe that few other metals service centers offer the broad range of processing services and metals that we provide. Our primary processing services range from cutting, leveling or sawing to more complex processes such as machining or electropolishing. We generally only process specific metals to non-standard sizes pursuant to customer purchase order specifications. In addition, we typically acquire standard size and grade products that can be processed into many different sizes to meet the needs of many different customers.

​

We have increased the amount of value-added processing services we provide through recent acquisitions and significant investments in new equipment over the past several years. Expanding our value-added capabilities (including toll processing) and increasing the percentage of our total sales represented by the higher margin orders generated from those capabilities, helps reduce the volatility in our profitability ratios during periods of unfavorable metals demand and/or pricing.

​

1

Table of Contents

​

According to the Metals Service Center Institute (“MSCI”) reporting of industry tons sold in the U.S., our 2023 tons sold from our U.S. locations represented 14.5% of the total tons sold by the U.S. metals service center industry compared to 14.2% for 2022. We believe our relatively low level of market share leaves significant opportunity for further strategic growth within the industry.

​

We primarily operate in the spot market for both the purchase and sale of our products. We have the ability to quickly pass on raw material price increases to our customers and maintain consistency in our gross profit margin as only a small portion of our business is subject to long-term contractual arrangements.

​

We strategically source the vast majority of our metal purchases from domestic producers and believe we are one of the largest customers of the North American primary metals producers (“mills”). We believe that our significant scale and relationships with suppliers enable significant purchasing power and product availability in all market conditions and allows for effective management of our inventories.

​

While Reliance has a decentralized structure with many different models operating independently from each other, we are now exploring commercial opportunities for our companies to work together and leverage the larger Reliance resources and capabilities to pursue and grow sales opportunities, better manager our inventory, provide opportunities to our employees, and share best practices.

​

Our business is relationship-based, and we operate under the following trade names:

​

2

Table of Contents

3

Table of Contents

4

Table of Contents

​

We have one operating and reportable segment—metals service centers. Further information about our reportable segment, including geographic information, appears in Note 18—“Segment Information” to our consolidated financial statements in Part II, Item 8 “Financial Statements and Supplementary Data.”

​

Industry Overview

​

Metals service centers acquire carbon steel, aluminum, stainless and alloy steel and other metal products from mills, and then process and distribute these materials to meet customer specifications.

​

Customers purchase metal products from metals service centers for a variety of reasons, including the ability to obtain value-added metals processing, readily available inventory, reliable and timely delivery, flexible minimum order size, and quality control. Many customers deal exclusively with service centers because the quantities of metal products that they purchase are smaller than the minimum order sizes specified by mills or because those customers require intermittent deliveries over long or irregular periods. Metals service centers respond to a niche market created because of the focus on as-needed inventory management and materials management outsourcing in the capital goods and related industries. In general, metals service center customers have placed increased emphasis on carrying lower amounts of inventory, especially during declining price environments.

​

The processing services we provide save our customers time, labor, and expense, reducing their overall manufacturing costs. Specialized metals processing equipment requires high utilization to be cost effective. We believe many manufacturers and their suppliers are not able or willing to invest in the necessary technology, equipment, and warehousing of inventory to perform efficient and effective metal processing themselves for their own operations. Accordingly, we believe industry dynamics have created a niche in the market for metals service centers. We believe that metals service centers purchase, process and deliver metals to end-users in a more efficient and cost-effective manner than the end-user could achieve by dealing directly with the primary producer.

​

According to IBISWorld Inc.’s October 2023 report, the U.S. metals wholesale industry (comprised of metals service centers of the MSCI and other metal wholesaling distributors) revenues were expected to decline approximately 11% from $331 billion in 2022 to approximately $296 billion in 2023, primarily due to lower metals prices. Our 2023 and 2022 U.S. revenues of approximately $14 billion and $16 billion, respectively, represented about 5% of the entire U.S. metals wholesaling market based on IBISWorld Inc.’s estimated 2023 and 2022 industry revenues. However, the measurement of our market share based on the shipment levels of the metals service center industry published by the MSCI, who does not also publish estimated industry revenues, was 14.5% in 2023, which we believe is due to the inclusion of non-metals service center companies in the broader metals wholesaling industry as defined by IBISWorld Inc. Regardless of the measurement of our market share through our tons sold via MSCI industry shipments or our sales relative to what we believe to be the broader metals wholesaling industry, our relatively low market share provides us significant opportunity for growth.

​

We believe that metals service centers are generally less susceptible to market cycles than metals producers because service centers are generally able to pass on all or a portion of increases in metal costs to their customers. As we have a limited long-term contractual business and focus on rapid inventory turnover, we believe that we are generally less vulnerable to changing metals prices than metals producers. However, fluctuations in metals pricing have a significant impact on our revenue and profit.

​

Operational Strategy

​

Our primary business strategy is to provide the highest levels of quality and service to our customers in the safest, most efficient operational manner, allowing us to maximize our financial results. The core tenets of our differentiated approach include:

​

5

Table of Contents

​

​

​

​

​

​

​

Growth Strategy

​

Our growth strategy is based on increasing our operating results through organic growth activities and strategic acquisitions that enhance our product, customer and geographic diversification. We believe our focused growth strategy and increasing the level of value-added services we provide our customers makes us less vulnerable to regional or industry-specific economic volatility and somewhat lessens the negative impact of volatility experienced in commodity pricing and cyclicality of our customer end markets, as well as general economic trends.

​

We expect to continue growing our business through acquisitions and internal growth initiatives, particularly those that diversify our product mix, customer base and geographic locations and increase our sales of high-margin specialty products and value-added processing services.

​

Sales and Marketing

​

Sales personnel are organized by division or subsidiary and are divided into two groups. Outside sales personnel travel throughout a specified geographic territory and maintain relationships with our existing customers and develop new customers. Inside sales personnel remain at the facilities to price and write orders. Outside sales personnel generally receive incentive compensation based on the gross profit from their particular geographic territories. Inside sales personnel generally receive incentive compensation based on the gross profit and/or pretax income of their particular location.

​

6

Table of Contents

We endeavor to acquire well-run businesses with strong customer relationships and solid reputations within the marketplace. Because of this, we find value in the acquired trade name and continue to use the business name and maintain the customer relationships.

​

Customers

​

Although we have many large original equipment manufacturer customers, the majority of our sales are to small machine shops and fabricators, in small quantities with frequent deliveries, ensuring as-needed logistics and helping them manage their working capital and credit needs more efficiently. Our metals service centers wrote and delivered over 4.6 million orders during 2023 or an average of 18,280 per day, with an average price of approximately $3,210 per order. Most of our metals service center customers are located within 200 miles of the metals service center serving them. The proximity of our service centers to our customers helps reduce total road miles and carbon emissions, promote efficient routing and provide quick delivery. With our fleet of approximately 1,750 trucks (some of which are leased), we are able to service many smaller customers and provide quick turnaround deliveries with approximately 40% of our orders delivered within 24 hours. We believe that maintaining our own fleet of trucks and drivers provides a competitive advantage as there has been a shortage of qualified drivers and third-party freight costs have been at elevated levels in recent years. Moreover, our order entry systems and flexible production scheduling enable us to meet customer requirements for short lead times and quick delivery. We believe long-term relationships with many of our customers significantly contribute to the success of our business with approximately 98% of our 2023 orders being from repeat customers. Providing prompt and efficient services and quality products at reasonable prices are important factors in maintaining and expanding these relationships.

​

We have built and opened international locations to service specific industries, typically making limited investments to support existing key U.S. customers that also operate in those international markets. Accordingly, our exposure to risks associated with such investments is minimal. Sales from our foreign operations were 7% of our net sales for the year ended December 31, 2023, or $1.02 billion. However, sales to international customers (based on the shipping destination) were approximately 9% of our consolidated 2023 net sales, or $1.38 billion, with approximately 27%, or $372.2 million, to Canadian customers.

​

Customer demand changes from time to time based on, among other things, general economic conditions and industry capacity. Many of the industries in which our customers compete are cyclical in nature. Because we sell to a wide variety of customers in a wide variety of industries, we believe that we are able to somewhat mitigate earnings volatility. In addition, many of our customers are small job shops and fabricators who also have a diverse customer base and the versatility to service different end markets when an existing market slows.

​

Due to our focus on small orders, decentralized operating structure and the diversity of the markets we serve, customer concentrations are not significant. Our largest customer represented only 1.0% of our net sales in 2023. In 2023, we generated sales greater than $30 million from only 31 customers.

​

Suppliers

​

We strategically purchase the majority of our inventory from the major domestic metals producers. Our U.S. operations do, however, also purchase minimal amounts of certain products from foreign producers. We have multiple suppliers for all of our products.

​

Because of our total volume of purchases and our long-term relationships with our suppliers, we believe that we are generally able to purchase inventory at the most competitive prices offered by our suppliers. We believe that these relationships provide us with an advantage in sourcing product to be available for our customers in accelerated timeframes when needed, and also allow us to more efficiently manage our inventory. We believe both our size and our long-term relationships with our suppliers continue to be important because mill consolidation has reduced the number of suppliers.

​

Seasonality

​

Some of our customers are in seasonal businesses, especially customers in the construction industry and related businesses. Our overall operations have not shown any material seasonal trends as a result of our geographic, product and

7

Table of Contents

customer diversity. Typically, revenues in the months of July, November and December have been lower than in other months because of a reduced number of working days for shipments of our products, resulting from holidays observed by the Company as well as vacation and extended holiday closures at some of our customers. The number of shipping days in each quarter also has an impact on our quarterly sales and profitability. Results of any one or more quarters are therefore not necessarily indicative of annual results.

​

Competition

​

The metals service center industry is highly fragmented and competitive within localized areas or regions. Many of our competitors operate single, stand-alone service centers. According to IBISWorld Inc., there were approximately 11,200 metal wholesaling locations operated by approximately 8,800 companies in the U.S. in 2023. According to the MSCI reporting of U.S. metals service center industry shipments, our 2023 tons sold from our U.S. locations represented approximately 14.5% of the industry total compared to 14.2% in 2022. The significant number of metals service centers that exist in this fragmented market creates opportunities for us to expand by making acquisitions.

​

We have numerous competitors in each of our product lines and geographic locations, and competition is most frequently local or regional. Our domestic service center competitors are generally smaller than we are, but we also face strong competition from national, regional and local independent metals distributors and the mills themselves, some of which have greater resources than we do.

​

We compete with other companies on price, service, quality, processing capability and availability of products and services. We maintain relationships with our major suppliers at the executive and local levels. We believe that this division of responsibility has increased our ability to obtain competitive prices of metals by leveraging our total size and to provide more responsive service to our customers by allowing our local management teams to make the purchasing decisions. In addition, we believe that the size of our inventory, the diversity of metals products we have available, and the wide variety of processing services we provide distinguish us from our competition. We believe our competitors are generally unable to offer the same high-quality products and services we provide using state-of-the-art equipment and advanced technology as they do not have the financial ability or risk tolerance to grow their businesses at the same rate as Reliance. We believe our industry-leading financial results in recent years were due to our strong financial condition, the high quality of products and services we are able to offer as a result of our significant investments in our acquired businesses, facilities and equipment, as well as our continued focus on small order sizes with quick turnaround.

​

Human Capital

​

At December 31, 2023, we employed approximately 15,000 persons worldwide, of which approximately 13,400 were employed in the U.S. Our total workforce of approximately 15,500 persons at December 31, 2023 includes approximately 500 contract and temporary workers. We manage to align our workforce levels with the pace of business and management believes it has sufficient human capital to operate our business successfully.

​

As of December 31, 2023, approximately 12% of our employees were represented by unions under collective bargaining agreements. We have entered into collective bargaining agreements with 41 union locals at 52 of our locations. These collective bargaining agreements have not had a material impact on our revenues or profitability. From time to time, our collective bargaining agreements expire and come up for renegotiation. Approximately 700 employees are covered by 19 different collective bargaining agreements that expire in 2024 unless renewed.

​

We seek to create an environment that values the health, safety and wellbeing of our employees, their families and the communities in which we live and do business. We strive to equip our employees with the knowledge, skills and resources to maintain or improve their personal health, develop professionally and operate safely within our businesses. A highlight of our commitment to our employees is the inclusion of “People” as one of our six core values that represent key areas of focus for our company. For more information on the Company’s core values, see the Company’s Code of Conduct available at https://investor.reliance.com.

​

8

Table of Contents

Among the critical elements included in the People category are the following:

​

​

The health and safety of our employees, customers, suppliers and communities is our most important core value. Our safety programs are designed around recognized standards with appropriate variations addressing the multiple jurisdictions and regulations, specific hazards and unique working environments of our operations. Our SMART Safety program focuses on embedding our culture of safety across all of our operations. We strive to have zero fatalities and no life-threatening or life-altering injuries and illnesses from working at our facilities.

​

Our executive team supports a safety management system that includes policies, standard practices and goals at our facilities, including:

​

​

​

​

​

​

We utilize a mixture of indicators to assess the health and safety performance of our domestic operations. Lagging indicators include the Occupational Safety & Health Administration (“OSHA”) Total Recordable Incident Rate (“TRIR”) and average Department of Transportation Recordable Accident Rate per million miles (“DOT Rate”).

​

​

Our focus on safety is evident in our 2023 TRIR, which is lower than the MSCI average of 3.5 as reported in their most recent survey conducted in 2020. A lower TRIR means that fewer people are injured, and fewer lives are negatively impacted. We have not identified a universally accepted and annually updated benchmarking standard for DOT Rate.

​

We believe that superior Company performance requires contributions from a diverse workforce that includes a variety of employee experiences, backgrounds, and characteristics. We are committed to providing fair and unbiased opportunities and hiring, developing and supporting a diverse and inclusive workplace. Our commitment to diversity and inclusion is also reinforced by our Code of Conduct, which prohibits employment discrimination or harassment based on race, color, sex (including pregnancy, childbirth and related medical conditions), national origin, religion, age, disability, genetic information, veteran status, sexual orientation, marital status, or any other characteristic protected by applicable law.

​

The health, wellness and wellbeing of our employees is critical to our success. We are committed to providing our employees with resources to help them achieve their personal health, wellness, and wellbeing goals. As part of our comprehensive benefits offering, we provide employees and their covered spouses/domestic partners with a robust employee assistance program, individualized assessments, access to lab or on-site health screenings and personalized wellness coaching. Our customizable program integrates web-based tools, phone and mail-based

9

Table of Contents

communications, local activities and is designed to support the diverse and individualized needs of our employees in order to help them improve or maintain their health status and ongoing engagement in healthy behaviors.

​

To help attract and retain the best employees, we strive to offer competitive compensation and best-in-class benefits. In addition to base salaries, our compensation programs can include annual bonuses, stock-based compensation awards, a 401(k) plan with employee matching opportunities, healthcare insurance and welfare benefits, health savings and flexible spending accounts. We believe that we provide industry-leading healthcare benefits to our employees and funded approximately 85% of the costs associated with our domestic employees’ health insurance coverage in 2023.

​

We believe employees should have an opportunity for ongoing development through challenging daily contributions and structured development programs. We launched an annual evolving leaders program focused on the continued training of selected employees, encouraging the development in several areas of our business, leadership and communication, along with opportunities for enterprise-wide collaboration to drive an approach to innovative problem solving and solutions. We continue to expand our talent management initiatives to pursue the significant long-term potential for our continued success. Our success is dependent on the knowledge, skills and abilities of our current and future leaders.

​

Quality Control

​

Procuring high-quality metal from suppliers on a consistent basis is critical to our business. We maintain strict quality control measures to assure that the quality of purchased raw materials will enable us to meet our customers’ specifications and to reduce the costs of production interruptions. In certain instances, we perform physical and chemical analyses on selected raw materials, typically through a third-party testing lab, to verify that mechanical and dimensional properties, cleanliness and surface characteristics meet our requirements and our customers’ specifications. We also conduct certain analyses of surface characteristics on selected processed metal before delivery to the customer. We believe that maintaining high standards for accepting metals ultimately results in reduced return rates from our customers.

​

We maintain various quality certifications throughout our operations. Approximately 55% of our operating locations have earned International Organization for Standardization (ISO 9001:2015) certifications. Many of our locations maintain additional certifications specific to the industries they serve, such as aerospace, auto, nuclear, and others, including certain international certifications.

​

Government Regulation

​

Beyond our compliance requirements with environmental regulations, compliance with government regulations has not had and, based on laws and regulations currently in effect, is not expected to have a material effect on the Company’s capital expenditures, earnings or competitive position. 

​

Our operations are also subject to laws and regulations relating to workplace safety and worker health, principally the OSHA and related regulations, which, among other requirements, establish noise, dust and safety standards. We maintain comprehensive health and safety policies and train employees to follow established safety practices.

​

We are subject to the conflict mineral provisions of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. We are required to undertake due diligence, disclose and report whether the products we sell originate from the Democratic Republic of Congo and adjoining countries. We verify with our suppliers the origins of all metals used in our products.

​

We sell metals to foreign customers from our domestic locations and operate metals service centers in 12 foreign countries, subjecting us to various countries’ trade regulations concerning the import and export of materials and finished products. Our operations are subject to the laws and regulations of the jurisdictions in which we conduct our business that seek to prevent corruption and bribery in the marketplace, including the U.S. Foreign Corrupt Practices Act (the “FCPA”)

10

Table of Contents

and the United Kingdom’s Bribery Act 2010. We have developed and implemented company-wide export and anti-corruption policies designed to provide our employees clear statements of our compliance requirements and to ensure compliance with applicable export and anti-corruption regulations. For information about risks related to government regulation, please see the risk factors set forth under the caption Item 1A. “Risk Factors” including the Risk Factors captioned “We are subject to various environmental, employee safety and health, and customs and export laws and regulations, which could subject us to significant liabilities and compliance expenditures;” and “We operate internationally and are subject to exchange rate fluctuations, exchange controls, political risks and other risks relating to international operations.”

​

Environmental

​

We are not a metals producer or mill – we operate metals service centers. We believe that circularity and low emissions are key attributes of our business model. As a distributor and “first-stage” processor of metal products, our operations, by their nature, have a limited environmental impact as we do not emit significant amounts of carbon dioxide or other greenhouse gases.

​

The overwhelming majority of our operations involve the processing and distribution of inherently sustainable aluminum and steel products that we believe (i) are some of the most commonly-recycled materials on the planet—more than plastic, paper, and glass combined each year and (ii) can be 100% recycled without loss of quality. We reintroduced over 221,900 tons of recycled scrap material into the manufacturing life cycle in 2023.

​

We continue to evaluate and implement energy conservation and other initiatives to reduce the environmental impact of our business. However, enactment of more stringent environmental regulations could have an adverse impact on our financial results. In addition, the manufacture and production of the materials we source from mills can be a carbon-intensive activity, and adoption of more stringent carbon regulations or policies may increase the prices of these materials.

​

As a processor and distributor of metals, and not a producer, we acknowledge and embrace our role in protecting the environment and continue to assess our impacts. Our strong desire is to identify and prioritize areas of improvement. In order to align our environmental initiatives with our broader strategy, we completed a materiality assessment to determine the environmental matters that are most critical to our business and our stakeholders. As a result of the materiality assessment, we determined that the most material environmental issues to our business are: (i) emissions from company-owned trucks that deliver our products; and (ii) our overall energy usage. We expect to update this materiality assessment on a periodic basis to ensure it reflects changes in our business and the external environment. 

​

In addition, prolonged disruption in the supply and/or distribution of metals due to weather, climate change or, natural disasters connected to climate change could increase costs, limit the availability of materials critical to our operations and have a significant impact on operating results.

​

Available Information

​

We file annual, quarterly and current reports, proxy statements and other documents with the SEC under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). The SEC maintains a website that contains reports, proxy statements and other information regarding issuers, including our Company, that file reports electronically with the SEC. The public can obtain any reports that we file with the SEC at https://sec.gov.

​

Our Investor Relations website is located at https://investor.reliance.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports filed or furnished pursuant to Section 13(a) of the Exchange Act are made available, free of charge, through our website as soon as reasonably practical after we electronically file or furnish the reports to the SEC. Information about Reliance’s ESG-related programs and initiatives is available under the “ESG” section of the Company’s website. Additional corporate governance information, including our restated certificate of incorporation, amended and restated bylaws, principles of corporate governance, Board committee charters, code of conduct and anti-bribery and anti-corruption policy, is available under Corporate Governance in the “Investors” section of the Company’s website. We encourage investors to visit our website.

​

11

Table of Contents

The website addresses presented above and elsewhere in this Annual Report on Form 10-K are not intended to function as hyperlinks, and the information contained in our website and in the SEC’s website is not intended to be a part of this filing.

​

Item 1A.  Risk Factors

​

Set forth below are the risks that we believe are material to our investors. Our business, results of operations and financial condition may be materially adversely affected due to any of the following risks. The risks described below are not the only ones we face. Additional risks of which we are not presently aware or that we currently believe are immaterial may also harm our business.

​

Risks Related to Our Business and Industry

​

The costs that we pay for metals fluctuate due to a number of factors beyond our control, and such fluctuations could adversely affect our operating results, particularly decreases in metals prices.

​

We purchase large quantities of aluminum, carbon, stainless and alloy steel and other metals, which we sell to a variety of customers. Our profitability is largely dependent upon the prices of the steel, aluminum and other metals we sell our customers. The price of metals we purchase and the price we charge our customers for the products we sell fluctuate based on many factors outside of our control, including general economic conditions (both domestic and international), competition, production levels, raw material costs, customer demand levels, import duties and other trade restrictions, currency fluctuations and surcharges imposed by our suppliers.

​

Pricing for our products generally has a much more significant impact on our results of operations than customer demand levels. If pricing declines, we will typically generate lower levels of gross profit and pretax income dollars. In addition, changes in metals prices that lower our gross profit margin can adversely affect our operating results. When metal prices decrease, we often cannot replace our higher cost inventory with the lower cost metal at a rate that would allow us to maintain a consistent gross profit margin, which would reduce our profitability during that interim period.

​

Metal prices are volatile due to, among other things, fluctuations in foreign and domestic production capacity, raw material availability and related pricing, metals consumption, tariffs, import levels into the U.S., governmental regulations, and the strength of the U.S. dollar relative to other currencies. Future changes in global general economic conditions or in production, consumption or export of metals could cause fluctuations in metal prices globally, which could adversely affect our profitability and cash flows. We generally do not enter into long-term agreements with our suppliers or hedging arrangements that could lessen the impact of metal price fluctuations.

​

We maintain substantial inventories of metal to accommodate the short lead times and delivery requirements of our customers. Our customers typically purchase products from us pursuant to purchase orders and typically do not enter into long-term purchase agreements or arrangements with us. Accordingly, we purchase metal in quantities we believe to be appropriate to satisfy the anticipated needs of our customers based on information derived from customers, market conditions, historic usage and industry research. Commitments for metal purchases are generally at prevailing market prices in effect at the time orders are placed or at the time of shipment. During periods of rising metal costs, our results may be negatively impacted by increases in the costs of the metals we purchase if we are unable to make equivalent increases in the selling prices of the products we sell. In addition, when metal prices decline, our selling prices generally decline and, as we sell inventory purchased at higher costs, results in lower gross profit margins and gross profit. Consequently, during periods in which we sell this existing inventory, the effects of changing metal prices could adversely affect our operating results.

​

Global economic conditions, including inflation, elevated interest rates, infectious disease and supply chain disruptions, have adversely affected, and could continue to adversely affect, our operations.

​

Our financial condition and results of operations are impacted by global markets and economic conditions over which we do not have control. A general global economic downturn or other adverse macroeconomic trends, including heightened inflation, capital markets volatility, currency rate fluctuations, an economic slowdown or recession, or a slowing or stalled

12

Table of Contents

recovery therefrom, have in the past resulted in and may in the future result in unfavorable conditions that negatively affect demand and selling prices for our products and exacerbate some of the other risks that affect our business, financial condition and results of operations.

​

In addition, the Federal Reserve in the U.S. and other central banks in various countries have raised interest rates in response to concerns about inflation, which, coupled with volatility in financial markets and the possibility that such rates may remain elevated for longer than expected, has had and may continue to have the effect of further increasing economic uncertainty and heightening these risks. Interest rate increases or other government actions taken to reduce inflation have resulted in recessionary pressures in many parts of the world.

​

We believe recent inflationary pressures have increased the costs of labor, energy and raw materials and have adversely affected consumer spending, economic growth and our operations. If such pressures increase our operating costs and we are unable to increase our gross profit at a similar rate due to decreases in demand, lack of mill price increases, our inability to pass any increases in metals replacement costs to our customers, or otherwise, our operating income margins would decline and our business, financial condition and results of operations could be adversely affected.

​

The war in Ukraine has led, is currently leading, and for an unknown period of time will continue to lead to disruptions in local, regional, national, and global markets and economies affected thereby, including in the global steel market. These disruptions caused by the invasion have included, and may continue to include, political, social, and economic disruptions and uncertainties and material increases in certain commodity prices that may affect our business operations. In addition, the duration and impact of the evolving conflict surrounding Israel and Gaza is unknown but is likely to have global economic and political ramifications.

​

In 2020, our operations were adversely affected by the impacts of the COVID-19 pandemic and related macroeconomic effects. Other outbreaks of contagious diseases, or other adverse public health developments in countries where we operate or our customers are located, could similarly adversely affect our business, results of operations and financial condition in the future.

​

Excess capacity and over-production by foreign metal producers or decreases in tariffs could increase the level of metal imports into the U.S., resulting in lower domestic prices, which would adversely affect our sales, margins and profitability.

​

Global metal-making capacity exceeds demand for metal products in some regions around the world. Rather than reducing employment by rationalizing capacity with consumption, we believe metal manufacturers in many countries (often with government assistance or subsidies in various forms) have periodically exported metal at prices which may not reflect their costs of production or capital. Excessive imports of metal into the U.S. have exerted, and may continue to exert, downward pressure on U.S. metal prices.

​

On March 1, 2018, the U.S. announced a plan to indefinitely impose a 25 percent tariff on certain imported steel products and a 10 percent tariff on certain imported aluminum products under Section 232 of the Trade Expansion Act of 1962 (the “Section 232”) tariffs. These Section 232 tariffs were imposed on national security grounds and addressed imported steel that was being unfairly traded by certain foreign competitors at artificially low prices. In retaliation against the Section 232 tariffs, the European Union subsequently imposed its own tariffs against certain steel products and other goods imported from the U.S. In recent years, negotiations between the U.S. government and other governments have resulted in revisions to these measures. To the extent these tariffs and other trade actions result in a decrease in international demand for steel and aluminum produced in the U.S. or otherwise negatively impact demand for our products, our business may be adversely impacted.

​

We expect that these tariffs, while in effect, will discourage metal imports from non-exempt countries. These tariffs have had a favorable impact on the prices of the products we sell and our results of operations. If these or other tariffs or duties expire or if others are relaxed or repealed, or if relatively higher U.S. metal prices make it attractive for foreign metal producers to export their products to the U.S., despite the presence of duties or tariffs, the resurgence of substantial imports of foreign metal could create downward pressure on U.S. metal prices. In recent years, the U.S. government agreed to modified tariff rate quota systems with each of the European Union, Japan and the United Kingdom that allow more

13

Table of Contents

imports from those trading partners to enter the U.S. market free of Section 232 tariffs. The U.S. government may also negotiate reductions or eliminations of Section 232 duties with other trading partners. If the Section 232 measures are further removed or substantially lessened, whether through legal challenge, legislation, executive action or otherwise, imports of foreign metals would likely increase and metal prices in the U.S. would likely fall, which could materially adversely affect our revenues, financial results and cash flows.

​

We operate in an industry that is subject to cyclical fluctuations and any downturn in general economic conditions or in our customers’ specific industries could negatively impact our profitability and cash flows.

​

The metals service center industry is cyclical and impacted by both market demand and metals supply. Periods of economic slowdown (such as global or regional recessions) decrease the demand for our products and adversely affect our pricing. If either demand or pricing were to decline from the current levels, this could reduce our profitability and cash flows.

​

We sell many products to industries that are cyclical, such as the non-residential construction, semiconductor, energy, automotive, aerospace and heavy equipment industries. Although many of our direct sales are to sub-contractors or job shops that may serve many customers and industries, the demand for our products is directly related to, and quickly impacted by, demand for the finished goods manufactured by customers in these industries, which may change as a result of changes in the general U.S. or worldwide economy, inflation, domestic exchange rates, energy prices or other factors beyond our control.

​

We compete with a large number of companies in the metals service center industry, and, if we are unable to compete effectively, our profitability and cash flows may decline.

​

We compete with a large number of other general-line distributors and processors, and specialty distributors in the metals service center industry. Competition is based principally on price, inventory availability, timely delivery, customer service, quality and processing capabilities. Competition in the various markets in which we participate comes from companies of various sizes, some of which have more established brand names in the local markets that we serve. To compete for customer sales, we may lower prices or offer increased services at a higher cost, which could reduce our profitability and cash flows. Rapidly declining prices and/or demand levels may escalate competitive pressures, with service centers selling at substantially reduced prices, and sometimes at a loss, in an effort to reduce their high-cost inventory and generate cash. Any increased and/or sustained competitive pressure could cause our share of industry sales to decline along with our profitability and cash flows.

​

If we were to lose any of our primary suppliers or otherwise be unable to obtain sufficient amounts of necessary metals on a timely basis, we may not be able to meet our customers’ needs and may suffer reduced sales.

​

We have few long-term contracts to purchase metals. Therefore, our primary suppliers of aluminum, carbon, stainless and alloy steel or other metals could curtail or discontinue their delivery of these metals to us in the quantities we need with little or no notice. Our ability to meet our customers’ needs and provide value-added inventory management services depends on our ability to maintain an uninterrupted supply of high-quality metal products from our suppliers. If our suppliers experience production problems, lack of capacity or transportation disruptions, the lead times for receiving our supply of metal products could be extended and the cost of our inventory may increase. If, in the future, we are unable to obtain sufficient amounts of the necessary metals at competitive prices and on a timely basis from our customary suppliers, we may not be able to obtain these metals from acceptable alternative sources at competitive prices to meet our delivery schedules. Even if we do find acceptable alternative suppliers, the process of locating and securing these alternatives may be disruptive to our business, which could have an adverse impact on our ability to meet our customers’ needs and reduce our profitability and cash flows. In addition, if a significant domestic supply source is discontinued and we cannot find acceptable domestic alternatives, we may need to find foreign sources of supply. Using foreign sources of supply could result in longer lead times, increased price volatility, less favorable payment terms, increased exposure to foreign currency movements and certain tariffs and duties and require greater levels of working capital. Alternative sources of supply may not maintain the quality standards that are in place with our current suppliers that could impact our ability to provide the same quality of products to our customers that we have provided in the past, which could cause our customers to move

14

Table of Contents

their business to our competitors or to file claims against us, and such claims may be more difficult to pass through to foreign suppliers.

​

There has been significant consolidation at the metal producer level both globally and within the U.S. This consolidation has reduced the number of suppliers available to us, which may limit our ability to obtain the necessary metals to service our customers. The number of available suppliers may be further reduced if the general economy enters into another recession.

​

We rely upon our suppliers as to the specifications of the metals we purchase from them.

​

We rely on mill certifications that attest to the physical and chemical specifications of the metal received from our suppliers for resale and generally, consistent with industry practice, we do not undertake independent testing of such metals unless independent tests are required by customers. We rely on customers to notify us of any metal that does not conform to the specifications certified by the supplying mill. Although our primary sources of products have been domestic mills, we have and will continue to purchase product from foreign suppliers when we believe it is appropriate. In the event that metal purchased from domestic suppliers is deemed to not meet quality specifications as set forth in the mill certifications or customer specifications, we generally have recourse against these suppliers for both the cost of the products purchased and possible claims from our customers. However, such recourse will not compensate us for the damage to our reputation that may arise from substandard products and possible losses of customers. Moreover, there is a greater level of risk that similar recourse will not be available to us in the event of claims by our customers related to products from foreign suppliers that do not meet the specifications set forth in the mill certifications. In such circumstances, we may be at greater risk of loss for claims for which we do not carry, or carry insufficient, insurance.

​

Climate change might adversely impact our supply chain or our operations.

​

Concern about climate change might result in new legal and regulatory requirements to reduce or mitigate the effects of climate change. While we believe our operations do not emit significant amounts of carbon dioxide or other greenhouse gases, legal or regulatory changes related to climate change may result in higher prices for metal, higher prices for utilities required to run our facilities, higher fuel costs for us and our suppliers, increased compliance costs and other adverse impacts. To the extent that new legislation or regulations increase our costs, we may not be able to fully pass these costs on to our customers without a resulting decline in sales and adverse impact to our profits.

​

Changing market dynamics, global policy developments, and the increasing frequency and impact of extreme weather events on critical infrastructure in the U.S. and elsewhere have the potential to disrupt our business, the business of our third-party suppliers, and the business of our customers, and may cause us to experience higher attrition, losses and additional costs to maintain or resume operations.

​

There is also increased focus by governmental and non-governmental entities on sustainability matters. Any perception that we have failed to act responsibly regarding climate change could result in negative publicity and adversely affect our business and reputation.

​

There also has been increased stakeholder focus, including by U.S. and foreign governmental authorities, investors, customers, media and nongovernmental organizations, on environmental sustainability matters, such as climate change, the reduction of greenhouse gases and water consumption. Legislative, regulatory or other efforts to combat climate change or other environmental concerns could result in future increases in taxes, restrictions on or increases in the costs of supplies, transportation and utilities, any of which could increase our operating costs, and necessitate future investments in facilities and equipment. Further, our customers may impose emissions reduction or other environmental standards and requirements. As a result, we may experience increased compliance burdens and the sourcing of our products may be adversely affected. These risks also include the increased pressure to make commitments, set targets, or establish additional goals to take actions to meet them, which could expose us to market, operational, execution and reputational costs or risks.

​

Developing and acting on initiatives within the scope of social and environmental sustainability, and collecting, measuring and reporting environmental sustainability-related information and metrics can be costly, difficult and time consuming and is subject to evolving reporting standards. Further, statements about our social and environmental

15

Table of Contents

sustainability-related initiatives and goals, and progress against those goals, may be based on standards for measuring progress that are still developing, internal controls and processes that continue to evolve, and assumptions that are subject to change in the future. If our social and environmental sustainability-related data, processes and reporting are incomplete or inaccurate, or if we fail to achieve progress with respect to our goals within the scope of social and environmental sustainability on a timely basis, or at all, our reputation, business, financial performance and growth could be adversely affected.

​

We face increased competition from alternative materials and risks concerning innovation, new technologies, products and increasing customer requirements.

​

As a result of increasingly stringent regulatory requirements, designers, engineers and industrial manufacturers, especially those in the automotive industry, may be increasing their use of lighter weight and alternative materials, such as composites, plastics, glass and carbon fiber. In addition, higher sustained market prices of metal products could cause new alternative material producers to enter the market. New or increased use of such materials could reduce the demand for metal products, which may reduce our profitability and cash flow.

​

If metals prices increase compared to certain substitute materials, the demand for our products could be negatively impacted, which could have an adverse effect on our financial results.  

​

In certain applications, metal products compete with other materials, such as composites, glass, carbon fiber, wood and plastic. Prices of all of these materials fluctuate widely, and differences between the prices of these materials and the price of metal products may adversely affect demand for our products and/or encourage material substitution, which could adversely affect the prices of and demand for metal products. The higher cost of metal relative to certain other materials may make material substitution more attractive for certain uses.

​

Our insurance coverage, customer indemnifications or other liability protections may be unavailable or inadequate to cover all of our significant risks or our insurers may deny coverage of or be unable to pay for material losses we incur, which could adversely affect our profitability and overall financial position.

​

We strive to obtain insurance agreements from financially solid, highly rated counterparties in established markets to cover significant risks and liabilities. Not every risk or liability can be insured, and for risks that are insurable, the policy limits and terms of coverage reasonably obtainable in the market may not be sufficient to cover all actual losses or liabilities incurred. Even if insurance coverage is available, we may not be able to obtain it at a price or on terms acceptable to us. Disputes with insurance carriers, including over policy terms, reservation of rights, the applicability of coverage (including exclusions), compliance with provisions (including notice) and/or the insolvency of one or more of our insurers may significantly affect the amount or timing of recovery.

​

In some circumstances we may be entitled to certain legal protections or indemnifications from our customers through contractual provisions, laws, regulations or otherwise. However, these protections are not always available, are typically subject to certain terms or limitations, including the availability of funds, and may not be sufficient to cover all losses or liabilities incurred.

​

If insurance coverage, customer indemnifications and/or other legal protections are not available or are not sufficient to cover our risks or losses, it could have a material adverse effect on our financial position, results of operations and/or cash flows.

​

If we do not successfully implement our growth strategy, our ability to grow our business could be impaired.

​

We may not be able to identify suitable acquisition candidates or successfully complete any acquisitions or integrate any other businesses into our operations. If we cannot identify suitable acquisition candidates or are otherwise unable to complete acquisitions, we may not be able to continue to grow our business as expected and, if we cannot successfully integrate recently acquired businesses, we may incur increased or redundant expenses. Moreover, any additional indebtedness we incur to pay for these acquisitions could adversely affect our liquidity and financial condition.

​

16

Table of Contents

We have invested a significant amount of capital in new locations and new processing capabilities. We may not be able to identify sufficient opportunities for internal growth to be able to sustain growth at similar levels. In addition, we may not realize the expected returns from these investments.

​

Acquisitions present many risks, and we may not realize the financial and strategic goals that were contemplated at the time of each transaction.

​

Since our initial public offering in September 1994, we have successfully purchased 73 businesses. We continue to evaluate acquisition opportunities and expect to continue to grow our business through acquisitions in the future. Risks we may encounter in acquisitions include:

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

17

Table of Contents

​

These factors could have a material adverse effect on our business, results of operations, financial condition or cash flows, particularly in the case of a larger acquisition or the completion of a number of acquisitions in any short period of time.

​

In addition, most of the acquisition agreements we have entered into require the former owners to indemnify us against certain liabilities related to the operation of those companies before we acquired them. In most of these agreements, however, the liability of the former owners is limited, and certain former owners may be unable to meet their indemnification responsibilities. Similarly, the purchasers of our non-core businesses may from time to time agree to indemnify us for operations of such businesses after the closing. We cannot be assured that any of these indemnification provisions will fully protect us, and as a result we may face unexpected liabilities that adversely affect our consolidated results of operations, financial condition and cash flows.

​

We are a decentralized company, which presents certain risks.

​

With a diverse geographic footprint in both North America and internationally, we believe our decentralized structure has catalyzed our growth and enabled us to remain responsive to opportunities and to our customers’ needs by leaving significant control and decision-making authority and accountability in the hands of local management. Because we are decentralized, we may be slower to detect compliance-related problems (e.g., a rogue employee undertaking activities that are prohibited by applicable law or by our internal policies) and “company-wide” business initiatives, such as the integration of disparate information technology systems, are often more challenging and costly to implement than they would be in a more centralized environment. Depending on the nature of the problem or initiative in question, such failure could materially adversely affect our business, financial condition or results of operations.

​

We are subject to various environmental, employee safety and health, and customs and export laws and regulations, which could subject us to significant liabilities and compliance expenditures.

​

We are subject to foreign, federal, state and local environmental laws and regulations concerning air emissions, wastewater discharges, underground storage tanks and solid and hazardous waste disposal at or from our facilities. Our operations are also subject to various employee safety and health laws and regulations, including those concerning occupational injury and illness, employee exposure to hazardous materials and employee complaints. We are also subject to customs and export laws and regulations for international shipment of our products. Environmental, employee safety and health, and customs and export laws and regulations are comprehensive, complex and frequently changing. Some of these laws and regulations are subject to varying and conflicting interpretations. We are subject from time to time to administrative and/or judicial proceedings or investigations brought by private parties or governmental agencies with respect to environmental matters, employee safety and health issues or customs and export issues. Proceedings and investigations with respect to environmental matters, any employee safety and health issues or customs and export issues could result in substantial costs to us, divert our management’s attention and result in significant liabilities, fines or the suspension or interruption of our operating activities. Some of our current properties are located in industrial areas with histories of heavy industrial use. The location of these properties may require us to incur environmental expenditures and to establish accruals for environmental liabilities that arise from causes other than our operations. In addition, we are currently remediating contamination in connection with a certain property related to activities at former manufacturing operations of a subsidiary we acquired. Future events, such as changes in existing laws and regulations or their enforcement, new laws and regulations or the discovery of conditions not currently known to us, could result in material environmental or export compliance or remedial liabilities and costs, constrain our operations or make such operations more costly.

​

18

Table of Contents

We operate internationally and are subject to changes in tax rates, exchange rate fluctuations, exchange controls, political risks and other risks relating to international operations.

​

Seven percent of our 2023 consolidated net sales were from operations outside the U.S., subjecting us to the risks of doing business on a global level. These risks include changes in tax rates, fluctuations in currency exchange rates, economic instability and disruptions, restrictions on the transfer of funds and the imposition of duties and tariffs. Additional risks from our multinational business include transportation delays and interruptions, war, terrorist activities, epidemics, pandemics, political instability, import and export controls, local regulation, changes in governmental policies, inflation, labor unrest and current and changing regulatory environments. International political and military conflict, such as the war in Ukraine, increasing tensions between Taiwan and China, or evolving events in Israel and Gaza could materially adversely affect the global economy. In addition, government policies on international trade and investment such as import quotas, tariffs, and capital controls, whether adopted by individual governments or addressed by regional trade blocs, can affect the demand for our customers’ products and services. The implementation of more restrictive trade policies, such as higher tariffs or new barriers to entry, in countries in which our customers sell large quantities of products and services could negatively impact our business, results of operations and financial condition. The Organization for Economic Cooperation and Development (“OECD”) has created a framework among 140 countries with the objective of implementing a global minimum effective tax rate of 15%. While we do not anticipate a material impact to our effective income tax rate under these changes, as additional jurisdictions adopt this legislation and the rules continue to evolve, our effective income tax rate and income taxes paid could increase in future years.  

​

Our operating results could be negatively affected by the global laws, rules and regulations, as well as political environments in the jurisdictions in which we operate. For example, we are subject to the FCPA, and similar worldwide anti-bribery laws in non-U.S. jurisdictions such as the United Kingdom’s Bribery Act 2010, which generally prohibit companies and their intermediaries from corruptly paying, offering to pay, or authorizing the payment of money, a gift, or anything of value, to a foreign official or foreign political party, for purposes of obtaining or retaining business. A company can be held liable under these anti-bribery laws not just for its own direct actions, but also for the actions of its foreign subsidiaries or other third parties, such as agents or distributors. In addition, we could be held liable for actions taken by employees or third parties on behalf of a company that we acquire. If we fail to comply with the requirements under these laws and regulations, we may face possible civil and/or criminal penalties, which could have a material adverse effect on our business or financial results.

​

We rely on information management systems and any damage, interruption or compromise of our information technology management systems, networks or data could disrupt and harm our business.

​

We rely upon information technology systems and networks in connection with the operation of our business, some of which are managed by third parties, to process, transmit and store electronic information. These systems and networks may include operational technology systems that we use to operate and manage our equipment and inventory. Additionally, we collect and store data that is sensitive to our company, including proprietary business information and the personal information of our employees, customers or others. Operating these information technology systems and networks and processing and maintaining this data, in a secure manner, is critical to our business operations and strategy. Our information management systems and the data contained therein are vulnerable to threats and disruption, including interruption due to power loss, system and network failures, operator negligence and similar causes.

​

In addition, our systems and data are susceptible to cybersecurity incidents, such as viruses, malware, ransomware and other cybersecurity attacks. Cybersecurity attacks are increasing in frequency and sophistication. Cybersecurity attacks may range from random attempts to coordinated and targeted attacks, including sophisticated computer crime and advanced threats. These threats pose a risk to the security of our information technology systems and networks and the confidentiality, availability and integrity of our data. We have experienced cybersecurity events such as viruses and attacks on our IT systems. To date, none of these events has had a material impact on our operations or financial results.

​

Despite our efforts to protect our systems, networks and data, we cannot guarantee protection from all cybersecurity incidents, including theft, misplaced or lost data, programming errors, or employee errors that could potentially lead to the compromise of such data, improper use of our systems, software solutions or networks, unauthorized access, use, disclosure, modification or destruction of information, defective products, production downtimes and operational

19

Table of Contents

disruptions. Furthermore, data protection laws and regulations around the world often require “reasonable,” “appropriate” or “adequate” technical and organizational security measures, and the interpretation and application of those laws and regulations are often uncertain and evolving; there can be no assurance that our security measures will be deemed adequate, appropriate or reasonable by a regulator or court. Moreover, even security measures that are deemed appropriate, reasonable, and/or in accordance with applicable legal requirements may not be able to protect the information we maintain.

​

Given the unpredictability of the timing, nature and scope of security incidents such as cybersecurity attacks or potential disruptions, we are subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromising, misappropriation, destruction or corruption of data, unauthorized access to or acquisition of data, other manipulation or improper use of our systems or networks, financial losses from remedial actions, loss of business or potential liability, and/or damage to our reputation, any of which could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition. Any significant compromise of our information management systems and networks or data could impede or interrupt our business operations and may result in negative consequences including loss of revenue, fines, penalties, litigation, reputational damage, regulatory actions or increased regulatory scrutiny, inability to accurately and/or timely complete required filings with government entities including the SEC and the Internal Revenue Service, unavailability or disclosure of confidential information (including personal data), negative impact on our stock price, environmental damage, and personal injury or death. Furthermore, we may be required to expend significant attention and financial resources to protect against physical or security incidents that could result in the misappropriation of our information or the information of our employees and customers.

​

While we have purchased cybersecurity insurance, there are no assurances that the coverage would be adequate in relation to any incurred losses. Moreover, as cyber-attacks increase in frequency and magnitude, we may be unable to obtain cybersecurity insurance in amounts and on terms we view as adequate for our operations.

​

Our enterprise data practices, including the collection, use, sharing, and security of the personal identifiable information of our customers, employees, or suppliers are subject to increasingly complex, restrictive, and punitive regulations in all key market regions. 

​

Various federal, state, and foreign laws and regulations as well as industry standards and contractual obligations govern the collection, use, retention, protection, disclosure, cross-border transfer, localization, sharing, and security of the data we receive from and about our customers, employees, suppliers, and other individuals. The regulatory environment for the collection and use of personal information for companies is evolving in the U.S. and internationally.

​

Under global data privacy and data protection regulations, the failure to maintain compliant data practices could result in consumer complaints, regulatory inquiry, civil or criminal penalties, litigation, legal liability, as well as brand impact or other harm to our business. In addition, increased consumer sensitivity to real or perceived failures in maintaining acceptable data practices could damage our reputation and deter current and potential users or customers from using our products and services. Because many of these laws are new, there is little clarity as to their interpretation, as well as a lack of precedent for the scope of enforcement. Other foreign, state and local jurisdictions have adopted and are considering adopting, laws and regulations imposing obligations regarding personal data. In some cases, these laws provide a private right of action that would allow customers to bring suit directly against us for mishandling their data or security incidents involving their personal information. The cost of compliance with these laws and regulations will be high and is likely to increase in the future.

​

Our financial results may be affected by various legal and regulatory proceedings, including those involving antitrust, tax, environmental, or other matters.

​

We are subject to a variety of litigation and legal compliance risks. These risks include, among other things, possible liability relating to product liability, personal injuries, intellectual property rights, contract-related claims, government contracts, taxes, environmental matters and compliance with U.S. and foreign laws, including competition laws and laws governing improper business practices. We or one of our subsidiaries could be charged with wrongdoing as a result of such matters. If convicted or found liable, we could be subject to significant fines, penalties, repayments, or other damages (in

20

Table of Contents

certain cases, treble damages). As a global business, we are subject to complex laws and regulations in the U.S. and other countries in which we operate. Those laws and regulations may be interpreted in different ways. They may also change from time to time and so may their related interpretations. Changes in laws or regulations could result in higher expenses and payments, and uncertainty relating to laws or regulations may also affect how we conduct our operations and structure our investments and could limit our ability to enforce our rights.

​

The volatility of the stock market could result in a material impairment of goodwill or indefinite-lived intangible assets.

​

We review the recoverability of goodwill and indefinite-lived intangible assets annually or whenever significant events or changes in circumstances occur that might impair the recovery of recorded costs. Factors that may be considered a change in circumstances, indicating that the carrying value of our goodwill or indefinite-lived intangible assets may not be recoverable, include a decline in stock price and market capitalization, declines in the market conditions for our products, viability of end markets, loss of customers, reduced future cash flow estimates, and slower growth rates in our industry. If prices for the products our customers sell fall substantially or remain low for a sustained period, we may be (i) unable to realize a profit from businesses that service such customers, (ii) required to record additional impairments, or (iii) required to suspend or reorganize operations that service such customers. An impairment charge, if incurred, could be material.

​

Our business operations and financial performance could be adversely affected by changes in our relationship with our employees or changes to U.S. or foreign employment regulations.

​

We had approximately 15,000 employees worldwide as of December 31, 2023. This means we have a significant exposure to changes in domestic and foreign laws governing our relationships with our employees, including wage and hour laws and regulations, fair labor standards, minimum wage requirements, overtime pay, unemployment tax rates, workers’ compensation rates, citizenship requirements and payroll taxes, which likely would have a direct impact on our operating costs. A significant increase in minimum wage or overtime rates in jurisdictions where we have employees could have a significant impact on our operating costs and may require that we relocate those operations or take other steps to mitigate such increases, all of which may cause us to incur additional costs, expend resources responding to such increases and lower our profitability.

​

We face certain risks associated with potential labor disruptions.

​

Approximately 12% of our employees are covered by collective bargaining agreements and/or are represented by unions or workers’ councils. Approximately 700 employees are covered by 19 different collective bargaining agreements that expire in 2024 unless renewed. While we believe that our relations with our employees are generally good, we cannot provide assurances that we will be completely free of labor disruptions such as work stoppages, work slowdowns, union organizing campaigns, strikes, lockouts or that any existing labor disruption will be favorably resolved. We could incur additional costs and/or experience work stoppages that could adversely affect our business operations through a loss of revenue and strained relationships with customers.

​

Risks Related to our Indebtedness

​

Our indebtedness could impair our financial condition or cause a downgrade of our credit rating and reduce the funds available to us for other purposes and our failure to comply with the covenants contained in our debt instruments could result in an event of default that could adversely affect our operating results.

​

We have substantial debt service obligations. As of December 31, 2023, we had aggregate outstanding indebtedness of approximately $1.15 billion. This indebtedness could adversely affect us in the following ways:

​

​

21

Table of Contents

​

​

​

Our existing debt agreements contain financial and restrictive covenants that limit the total amount of debt that we may incur and may limit our ability to engage in other activities that we may believe are in our long-term best interests. Our failure to comply with these covenants may result in an event of default, which, if not cured or waived, could accelerate the maturity of our indebtedness or prevent us from accessing additional funds under our revolving credit facility. If the maturity of our indebtedness is accelerated, we may not have sufficient cash resources to satisfy our debt obligations and we may not be able to continue our operations as planned. See discussion regarding our financial covenants in the “Liquidity and Capital Resources” section of Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

​

Our acquisition strategy and growth-related capital expenditures may require access to external capital, and limitations on our access to external financing sources could impair our ability to grow.

​

We may have to rely on external financing sources, including commercial borrowings and issuances of debt and equity securities, to fund our acquisitions and growth-related capital expenditures. Limitations on our access to external financing sources, whether due to tightened capital markets, available capital with unfavorable interest rates or otherwise, could impair our ability to execute our growth strategy.

​

Because all of our available borrowing capacity on our revolving credit facility bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, if we increase our leverage in the future, we are vulnerable to increases in interest rates.

​

As of December 31, 2023, we had an insignificant amount of variable interest rate debt outstanding. However, as of December 31, 2023, we had approximately $1.5 billion available for borrowing on our revolving credit facility at variable interest rates. We currently do not use derivative financial instruments to manage the potential impact of interest rate risk. Accordingly, if we borrow on our revolving credit facility, our interest expense will fluctuate based on the Secured Overnight Financing Rate and other variable interest rates.

​

​

Item 1B.  Unresolved Staff Comments

​

None.

​

Item 1C.  Cybersecurity

​

Risk Management and Strategy

​

Reliance has implemented processes for assessing, identifying and managing material risks from cybersecurity threats, which are integrated into the Company’s overall enterprise risk management systems and processes. The Company’s cybersecurity risk program is largely based on the U.S. National Institute for Standards and Technology (“NIST”) cybersecurity framework and other applicable industry frameworks. The Company regularly assesses the threat landscape and takes a holistic view of cybersecurity risks, with a layered cybersecurity strategy based on prevention, detection and containment. The Company has also engaged third parties in connection with the assessment and advancement of its cybersecurity risk management processes. We undertake regular vulnerability scanning, periodic penetration testing and maturity assessments with the support of third parties; vulnerabilities are subsequently addressed based on risk/benefit analyses.

​

To support our preparedness, we have constituted a Cybersecurity Review Committee (“CRC”) and adopted a written cybersecurity incident response plan (“CIRP”). In the event of a cybersecurity incident, our CRC refers to our CIRP and existing management internal controls processes. Pursuant to these prescribed processes, designated personnel are

22

Table of Contents

responsible for assessing the severity of the incident and any associated threats, containing and resolving the incident as quickly as possible, managing any damage to the Company’s systems and networks, minimizing the impact on the Company’s stakeholders, analyzing and executing upon reporting obligations, escalating information about the incident to senior management and potentially representatives from the Board, as appropriate, and performing post-incident analysis and program enhancements, as needed. We perform tabletop exercises to test our incident response procedures, identify cybersecurity gaps and vulnerabilities and improvement opportunities and exercise team preparedness.

​

Reliance mandates regular cybersecurity training for employees and applicable contractors and considers this a critical step in safeguarding the Company’s data and assets. The training is designed to provide employees and contractors with a baseline understanding of cybersecurity fundamentals to prevent security breaches and safely identify potential threats. The course includes enhancements to strengthen our defensive stance against the increasing number and sophistication of cyberattacks worldwide and also includes interactive modules covering various cyberattack methodologies, including insider attacks, phishing and other email attacks, malware attacks, data protection, data handling, password protections, cloud and internet security and cybersecurity fundamentals for mobile devices. We take a risk-based approach with respect to our use and oversight of third-party service providers, using a number of means to assess cyber risks related to our third-party service providers, including vendor questionnaires, conducting due diligence in connection with onboarding new vendors, and negotiating for cybersecurity-related terms in vendor agreements as appropriate. We also seek to collect and assess cybersecurity audit reports and other supporting documentation when available.

​

Cybersecurity Risks

​

Like other complex corporations, Reliance is the target of cyber-attacks from time to time. However, since January 1, 2021 (the first date covered by the financial statements presented in this Form 10-K) we have not experienced any cybersecurity incident that has materially affected or is reasonably likely to materially affect the Company, including its business strategy, results of operations or financial condition. For additional information about risks related to cybersecurity, please see the risk factor set forth under the caption Item 1A. “Risk Factors" the Risk Factor captioned “We rely on information management systems and any damage, interruption or compromise of our information technology management systems, networks or data could disrupt and harm our business.”

​

Governance

​

Roles and Responsibilities

​

Cybersecurity is an important element of our risk management processes and an area of particular focus for Reliance’s Board of Directors and management. The Company’s Sr. Director, Information Security (“ISD”) serves as single point of communication and coordination for protecting the Company and its digital information. The ISD performs an initial assessment of each reported cyber incident and escalates all non-trivial cybersecurity incidents and risks to the CRC. The CRC is primarily responsible for assessing and managing material risks from cybersecurity threats and is comprised of a cross-functional team including the ISD, the Chief Information Officer (“CIO”) as well as senior representatives from the Company’s risk management, finance and legal functions. The ISD has 17 years of cybersecurity experience, including 6 years with Reliance. The ISD maintains industry recognized credentials relevant to his role.

​

The Board, acting through its committee structure, is responsible for overseeing management’s implementation and execution of the enterprise risk management processes and for coordinating the outcome of reviews by Committees in their respective risk areas. Although each Committee is responsible for overseeing the management of certain risks, the full Board is regularly informed by the Committees about these risks. This helps enable the Board and the Committees to coordinate risk oversight and the relationships among the various risks faced by the Company, including cybersecurity risk. Directors with experience overseeing and managing risk management processes play a critical role in the Board’s oversight of our enterprise risk management processes.

​

The full Board has designated the Audit Committee to be responsible for oversight of cybersecurity risk. The Audit Committee receives regular reports from the CIO and the ISD that may discuss topics such as prior assessments, cybersecurity trends, prior cybersecurity events, and planned enhancements. In addition, the Audit Committee also receives

23

Table of Contents

regular periodic reports regarding information technology general controls in connection with its oversight of internal control over financial reporting. The Chair of the Audit Committee regularly briefs the full Board on these matters. 

​

Item 2.  Properties

​

As of December 31, 2023, we operated a network of over 315 locations in 40 U.S. states and 12 foreign countries. In the opinion of management, all of our facilities are in good condition and are adequate for our existing operations. These facilities currently operate at about 50-60% of capacity based upon a 24-hour seven-day week, with each location averaging approximately two shifts operating at full capacity for a five-day work week. We have the ability to increase our operating capacity significantly without further investment in facilities or equipment if demand levels increase.

​

We leased 86 of our metals service center facilities as of December 31, 2023. In addition, we have ground leases and other leased spaces, such as depots, sales offices and storage, totaling 6.0 million square feet. Total square footage on all company-owned properties is approximately 31.0 million and represents approximately 84% of the aggregate square footage of our operating facilities. Our leases of facilities and other spaces expire at various times through 2045 and certain ground leases expire at various times through 2068.

​

Item 3.  Legal Proceedings

​

The information contained under the captions “Legal Matters” and “Environmental Contingencies” in Note 16—“Commitments and Contingencies” to our consolidated financial statements in Part II, Item 8 “Financial Statements and Supplementary Data” is incorporated herein by reference.

​

Item 4.  Mine Safety Disclosures

​

Not applicable.

​

PART II

​

Item 5.  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

​

Our common stock is owned by 163 stockholders of record as of February 23, 2024. Our common stock has traded on the New York Stock Exchange (“NYSE”) under the symbol “RS” for approximately 30 years since our September 16, 1994 initial public offering. Our stockholders of record exclude those stockholders whose shares are held for them in street name through banks, brokers or other nominee accounts.

​

We have paid quarterly cash dividends on our common stock for 64 consecutive years and have never reduced or suspended our regular quarterly dividend. In February 2024, our Board of Directors increased the regular quarterly dividend amount 10.0% to $1.10 per share from $1.00 per share. We have increased our regular quarterly dividend rate 31 times since our IPO in 1994. Further increases in the quarterly dividend rate will be evaluated by the Board based on conditions then existing, including our earnings, cash flows, financial condition and capital requirements, or other factors the Board may deem relevant. We expect to continue to declare and pay dividends in the future, if earnings are available to pay dividends, but we also intend to continue to retain a portion of earnings for reinvestment in our operations and expansion of our businesses. We cannot assure you that any dividends will be paid in the future or that, if paid, the dividends will be at the same amount or frequency as paid in the past. Our payment of dividends in the future will depend on business conditions, our financial condition, earnings, liquidity and capital requirements and other factors.

​

On October 24, 2023, our Board of Directors renewed our then existing share repurchase program to increase the remaining repurchase authorization from $261.5 million to $1.5 billion effective October 30, 2023. The share repurchase program does not obligate us to repurchase any specific number of shares, does not have a specific expiration date and may be suspended or discontinued at any time. We repurchase shares of our common stock from time to time pursuant to a combination of one or more open market repurchases and transactions structured through investment banking institutions in reliance upon Rule 10b5-1 and/or Rule 10b-18 under the Exchange Act.

​

24

Table of Contents

During 2023, we repurchased approximately 1.9 million shares of our common stock under our repurchase program at an average cost of $255.30 per share, for a total of $479.5 million. As of December 31, 2023, we had remaining authorization under the program to repurchase $1.44 billion of shares of our common stock.

​

Our share repurchase activity during the three months ended December 31, 2023 was as set forth below:

​

​

The table above excludes taxes paid for shares withheld to settle employees’ tax withholding obligations related to net share settlements upon the vesting of restricted stock units.

​

Information relating to compensation plans under which our equity securities are authorized for issuance will be included in our definitive Proxy Statement for our 2024 Annual Meeting of Stockholders to be held on May 15, 2024 and is incorporated herein by reference.

​

Stock Performance Graph

​

This graph is not deemed to be “filed” with the United States Securities and Exchange Commission (“SEC”) or subject to the liabilities of Section 18 of the Exchange Act and should not be deemed to be incorporated by reference into any of our prior or subsequent filings under the Securities Act of 1933 or the Exchange Act.

​

The following graph compares the performance of our common stock with that of the S&P 500, the Russell 2000 and an industry peer group consisting of publicly-traded metals service center companies (the “industry peer group”) for the five-year period from December 31, 2018 through December 31, 2023. The graph assumes, in each case, that an initial investment of $100 is made at the beginning of the five-year period. The cumulative total return reflects market prices at the end of each year and the reinvestment of dividends. Since there is no nationally-recognized industry index consisting of metals service center companies to be used as a peer group index, Reliance constructed the industry peer group. As of December 31, 2023, the industry peer group consisted of Olympic Steel Inc., which has securities listed for trading on NASDAQ; Ryerson Holding Corporation, Worthington Enterprises, Inc., each of which has securities listed for trading on the NYSE; and Russel Metals Inc., which has securities listed for trading on the Toronto Stock Exchange. The returns of each member of the industry peer group are weighted according to that member’s stock market capitalization.

​

In December 2023, Worthington Industries, Inc., which was included in the industry peer group at December 31, 2022, split into Worthington Enterprises, Inc. and Worthington Steel, Inc. The newly traded Worthington Steel, Inc. common stock received by the holders of Worthington Enterprises, Inc. common stock at the distribution date is not included in the cumulative total return of the industry peer group.

​

​

25

Table of Contents

The stock price performance shown on the graph below is not necessarily indicative of future price performance.

​

Comparison of 5 Year Cumulative Total Return Among Reliance, Inc.,
the S&P 500 Index, the Russell 2000 Index and an Industry Peer Group

Copyright© 2024 Standard & Poor’s, a division of S&P Global. All rights reserved.
Copyright© 2024 Russell Investment Group. All rights reserved.

​

​

​

Item 6.  [Reserved]

​

26

Table of Contents

Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

​

This Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with the other sections of this Annual Report on Form 10-K, including the consolidated financial statements and related notes contained in Item 8, and the discussion of cautionary statements and significant risks to the Company’s business under Item 1A. “Risk Factors” of this Annual Report on Form 10-K.

​

Overview

​

In 2023, our earnings per diluted share of $22.64 and operating cash flow of $1.67 billion were the second highest in our history.

​

Tons sold increased 3.7% in 2023 compared to 2022 due to healthy demand in our key end markets, including non-residential construction (our largest end market), automotive and aerospace, as well as contributions from our organic growth activities. The increase in our tons sold in 2023 significantly outperformed the 1.5% increase in shipments for the industry as reported by the Metals Service Center Institute (“MSCI”).

​

Our net sales of $14.81 billion declined 13.0% in 2023 compared to record levels of $17.03 billion in 2022 due to a decline in our average selling price per ton sold of 16.4% that was partially offset by an increase in our tons sold.

​

We believe record metals pricing in 2022 was largely driven by supply chain disruptions caused by the onset of the conflict between Russia and Ukraine, labor supply and microchip shortages, and impacts of the COVID-19 pandemic, including the omicron variant surge and lockdowns in China.

​

Gross profit margin of 30.7% in 2023 compared to 30.8% in 2022.

​

Second highest annual earnings per diluted share of $22.64 in 2023 compared to record earnings per diluted share of $29.92 in 2022. Lower gross profit, driven by lower metals prices that outweighed an increase in tons sold, contributed to a decrease in earnings per share from our 2022 record.

​

Cash flow from operations of $1.67 billion in 2023, also the second highest in our history, decreased from a record $2.12 billion in 2022 due to lower profitability, partially offset by lower working capital needs.

​

Organic growth activities were substantially comprised of capital expenditures of $468.8 million in 2023 compared to $341.8 million in 2022. We also acquired Southern Steel Supply, LLC (“Southern Steel”) in May 2023.

​

Returns to stockholders totaled $717.6 million in 2023, comprised of $238.1 million of cash dividends and $479.5 million of share repurchases.

​

Effect of Demand and Pricing Changes on our Operating Results

​

Customer demand can have a significant impact on our results of operations. When volume increases, our revenue dollars generally increase, which contributes to increased gross profit dollars. Conversely, when volume declines, we typically produce fewer revenue dollars, which can reduce our gross profit dollars. Variable costs also increase with volume, primarily our warehouse, delivery, selling, general and administrative expenses. We can reduce certain variable expenses when volumes decline, but we cannot easily reduce our fixed costs.

​

Pricing for our products generally has a much more significant impact on our results of operations than customer demand levels. As discussed above, our record profitability in 2022 was mainly driven by increases in metals prices to record levels and to a lesser extent the moderate increase in our tons sold. Our revenues generally increase as a result of pricing increases as overall customer demand is not usually impacted by typical mill pricing increases, although customer buying patterns may change. Our selling prices generally increase when the cost of the metals we purchase increase as we are typically able to pass higher prices on to our customers. If prices increase and we maintain the same gross profit percentage, we generate higher levels of gross profit and pretax income dollars for the same operational efforts. Conversely,

27

Table of Contents

if pricing declines, we will typically generate lower levels of gross profit and pretax income dollars. For more information, see Item 1A. “Risk Factors”.

​

In addition, when volume or pricing increases, our working capital requirements typically increase which decreases operating cash flow. Conversely, when customer demand falls, our working capital needs typically decrease which has the effect of increasing operating cash flow.  

​

Acquisitions

​

2024 Acquisitions

​

On February 1, 2024, we acquired Cooksey Iron & Metal Company (“Cooksey Steel”), a metals service center that processes and distributes finished steel products, including tubing, beams, plates and bars, with cash on hand. Headquartered in Tifton, Georgia, Cooksey Steel operates three locations, servicing a diverse range of customers in Georgia, Florida, Alabama and South Carolina.

​

On February 14, 2024, we announced that we had entered into a definitive agreement to acquire American Alloy Steel, Inc. (“American Alloy”) subject to regulatory approval and other customary closing conditions, which have not yet occurred. American Alloy is headquartered in Houston, Texas and is a distributor of specialty carbon and alloy steel plate and round bar, including pressure vessel quality (PVQ) material.

​

Combined unaudited revenues for Cooksey Steel and American Alloy for the twelve months ended December 31, 2023 were approximately $400 million.

​

2023 Acquisition

​

On May 1, 2023, we acquired Southern Steel with cash on hand. Southern Steel is headquartered in Memphis, Tennessee and offers merchant and structural steel, pipe and tube, steel plate, ornamental products and laser cut and fabricated parts. Included in our net sales for the year ended December 31, 2023 were net sales of $30.6 million from Southern Steel.

​

2021 Acquisitions

​

In the fourth quarter of 2021, we acquired each of United Pipe & Steel Corp. (formerly known as Merfish United, Inc.), Admiral Metals Servicenter Company, Incorporated, Nu-Tech Precision Metals Inc. and Rotax Metals Inc. with cash on hand for a combined transaction value of $440.3 million. Included in our net sales for the year ended December 31, 2023 were combined net sales of $722.1 million from our 2021 acquisitions.

​

Internal Growth Activities

​

We continued to maintain our focus on internal growth by building new facilities, expanding existing facilities, replacing leased facilities with those we own and adding to our processing capabilities, upgrading processing equipment, improving the safety and energy efficiency of our operations and enhancing the working environments of our employees. Our capital expenditure budgets have been at historically high levels in recent years. Our 2024 capital expenditure budget is approximately $425 million.

​

We have made significant capital expenditure investments totaling approximately $2.2 billion over the past nine years. These significant investments have expanded our value-added processing capabilities that our managers in the field have successfully leveraged to increase the percentage of our orders with value-added processing, which has significantly contributed to increased gross profit margins compared to our historical range. In 2023 and 2022, we performed value-added processing on approximately 50% to 51% of the orders we shipped, significantly higher than our historical range of 40% to 45%, with a gross profit margin of 30.7% in 2023 that was approximately 400 basis points higher than our historical range of 25% to 27%. For reference, in 2014 and 2013, our value-added processing percentages/gross profit margins were 45%/25.1% and 40%/26.0%, respectively.

28

Table of Contents

​

We believe that our ability to make significant investments in processing equipment and facilities provides a competitive advantage for us, as we can provide our customers with a higher quality product and expand our services to them. We believe many metals service center company competitors do not have the ability to expand their processing services in response to their customers’ needs as quickly and at the same scale as Reliance.

​

Results of Operations

​

The following sets forth certain income statement data for each of the last three years ended December 31, 2023 (dollars are shown in millions, except per share amounts, and certain percentages may not calculate due to rounding):

​

​

​

Year Ended December 31, 2023 Compared to Year Ended December 31, 2022

​

Net Sales

​

​

Our tons sold and average selling price per ton sold exclude our tons toll processed. Our average selling price per ton sold includes intercompany transactions that are eliminated from our consolidated net sales.

​

29

Table of Contents

Our 2023 net sales declined from 2022 record levels due to declines in our average selling price per ton sold that were partially offset by increases in tons sold. The increases in our tons sold were due to healthy demand in our key end markets, including non-residential construction (our largest end market), aerospace, and automotive as well as contributions from our organic growth activities.

​

Our average selling price per ton sold peaked in the second quarter of 2022 and subsequently declined thereafter, including throughout 2023. We believe record metals pricing in 2022 was largely driven by supply chain disruptions caused by the onset of the conflict between Russia and Ukraine, labor supply and microchip shortages, and impacts of the COVID-19 pandemic, including the omicron variant surge and lockdowns in China.

​

Since we primarily purchase and sell our inventories in the spot market, our average selling prices generally fluctuate similarly with the changes in the costs of the various metals we purchase; the mix of products sold can also have an impact on our overall average selling price per ton sold. As carbon steel sales represented 53% of our gross sales in 2023, changes in carbon steel prices have the most significant impact on changes in our overall average selling price per ton sold. Year-over-year changes in the selling prices of our major commodity products and related mix of our tons sold are presented below:

​