Table of Contents

Registration No. 333- _______

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM S-1

REGISTRATION STATEMENT UNDER THE SECURITIES ACT OF 1933

UNUSUAL MACHINES, INC.

(Exact name of registrant as specified in its charter)

151 Calle De San Francisco
Ste. 200 PMB 2106
San Juan, Puerto Rico 00901-1607

+1 855-921-4600

(Address, including zip code, and telephone number, including area code of registrant’s principal executive offices)

Brandon Torres Declet

151 Calle De San Francisco
Ste. 200 PMB 2106
San Juan, Puerto Rico 00901-1607

+1 855-921-4600

(Name, address, including zip code, and telephone number, including area code, of agent for service)

Copies to:

Approximate date of commencement of proposed sale to the public: As soon as practicable after this Registration Statement is declared effective.

If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933 check the following box. ☐

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

The registrant hereby amends this Registration Statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, or until this Registration Statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to Section 8(a), may determine.

The information contained in this preliminary Prospectus is not complete and may be changed. These securities may not be sold until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any state where the offer or sale is not permitted.

______________ Shares

of Common Stock

Unusual Machines, Inc.

This is the initial public offering, or the “Offering,” of ________ shares of common stock, par value $0.01 per share of Unusual Machines, Inc., a Puerto Rico corporation (“UMAC” or the “Company”), on a firm commitment basis. A significant amount of the proceeds of the Offering will be used by the Company to pay $5.0 million of the $18 million purchase price (the “Purchase Price”) to acquire Fat Shark Holdings, Ltd. (“Fat Shark”) and Rotor Riot LLC (“Rotor Riot”) each of which are wholly-owned subsidiaries of Red Cat Holdings, Inc. (“Red Cat”), which acquisition is referred to elsewhere in this Prospectus as the “Business Combination”. The Company will issue Red Cat a senior secured convertible note in the principal amount of $2.5 million (the “Senior Note”) . See “Use of Proceeds”. The conversion price of the Senior Note is the lower of $4.00 and the per-share offering price in this Offering, and for purposes of the descriptions and amounts contained in this Prospectus we are assuming the conversion price of $4.00 per share. The 625,000 shares of common stock issuable to Red Cat upon conversion of the Senior Note are referred to in this Prospectus as the “Conversion Shares.”

Upon consummation of the Offering, assuming the issuance of ____ shares of our common stock at $___ per share (the anticipated midpoint of the range) Mr. Jeffrey Thompson, our largest stockholder, will beneficially own ___% of our common stock (excluding the exercise of the over-allotment option by the underwriters and the issuance of the warrants to the underwriters, the issuance of the Conversion Shares and the issuance of our Series A Convertible Preferred Stock (referred to in this Prospectus as the “Series A”) as part of the Purchase Price, which Mr. Thompson will not be deemed to beneficially own. See “The Business Combination” and “Principal Stockholders” for more information.

Prior to this Offering, there has been no public market for our common stock. We expect that the initial public offering price will be between $____ and $____ per share. We intend to list the shares of our common stock on The Nasdaq Capital Market under the symbol “UMAC.” However, there is no assurance that the Offering will be closed and our common stock will begin trading on The Nasdaq Capital Market (“Nasdaq”). The Offering is contingent upon final approval of our listing on Nasdaq,

We are an “emerging growth company” under applicable U.S. federal securities laws and are eligible for reduced public company reporting requirements.

Upon the completion of this Offering, we will have ______ shares of common stock issued and outstanding, or ___________ shares of common stock if the underwriters exercise their over-allotment option in full. Each share of our common stock is entitled to one vote.

Investing in our common stock involves a high degree of risk. See “Risk Factors” beginning on page 8. Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this Prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

______________

The underwriters are selling ________ shares of common stock (or _____ shares of common stock if the underwriters exercise their over-allotment option in full) in this Offering on a firm commitment basis. We have granted the underwriters an option, exercisable for 45 days following the effective date of this Prospectus, to purchase up to an additional ___ % of the shares of common stock offered in this Offering on the same terms solely to cover over-allotments. The Registration Statement of which this Prospectus is a part also covers the shares of common stock issuable upon the exercise of the underwriter’s over-allotment option. For additional information regarding our arrangement with the underwriters, please see “Underwriting” beginning on page 76.

The underwriters expect to deliver the shares to purchasers on or about ________ __, 2023.

Sole Book Running Manager

____________

Co-Manager

_____________________

The date of this Prospectus is ________, 2023.

TABLE OF CONTENTS

You should rely only on information contained in this Prospectus. We have not, and the underwriter has not, authorized anyone to provide you with additional information or information different from that contained in this Prospectus. Neither the delivery of this Prospectus nor the sale of our securities means that the information contained in this Prospectus is correct after the date of this Prospectus. This Prospectus is not an offer to sell or the solicitation of an offer to buy our securities in any circumstances under which the offer or solicitation is unlawful or in any state or other jurisdiction where the offer is not permitted.

For investors outside the United States: Neither we nor the underwriter has taken any action that would permit this Offering or possession or distribution of this Prospectus in any jurisdiction where action for that purpose is required, other than in the United States. Persons outside the United States who come into possession of this Prospectus must inform themselves about, and observe any restrictions relating to, the offering of the securities covered hereby and the distribution of this Prospectus outside of the United States. 

The information in this Prospectus is accurate only as of the date on the front cover of this Prospectus. Our business, financial condition, results of operations and prospects may have changed since those dates.

No person is authorized in connection with this Prospectus to give any information or to make any representations about us, the securities offered hereby or any matter discussed in this Prospectus, other than the information and representations contained in this Prospectus. If any other information or representation is given or made, such information or representation may not be relied upon as having been authorized by us.

Neither we nor the underwriters have done anything that would permit this Offering or possession or distribution of this Prospectus in any jurisdiction where action for that purpose is required, other than the United States. You are required to inform yourself about, and to observe any restrictions relating to, this Offering and the distribution of this Prospectus.

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

This Prospectus contains, in addition to historical information, certain forward-looking statements that includes information relating to future events, future financial performance, strategies, business opportunities, expectations including our goals and projections with respect to the planned Business Combination, our anticipated operations and business strategy with respect to Fat Shark and Rotor Riot and the design, manufacture and sale of drone and drone-related products through those entities, projections and estimates for demand, growth and other metrics regarding drone products and the drone industry, future plans for and anticipated transactions and relationships with respect to our products and intellectual property portfolio and operations, our working capital needs, the planned use and sufficiency of the proceeds from this Offering, our further development and implementation of our business plan and our ability to locate sources of capital necessary to meet our business needs and objectives. Such forward-looking statements include those that express plans, anticipation, intent, contingency, goals, targets or future development and/or otherwise are not statements of historical fact. These forward-looking statements are based on our current expectations and projections about future events and they are subject to risks and uncertainties known and unknown that could cause actual results and developments to differ materially from those expressed or implied in such statements.

In some cases, you can identify forward-looking statements by terminology, such as “may,” “should,” “would,” “expect,” “intend,” “anticipate,” “believe,” “estimate,” “continue,” “plan,” “potential” and similar expressions. Accordingly, these statements involve estimates, assumptions and uncertainties that could cause actual results to differ materially from those expressed in them. Any forward-looking statements are qualified in their entirety by reference to the factors discussed throughout this Prospectus or incorporated herein by reference.

You should read this Prospectus and the documents we have filed as exhibits to the Registration Statement, of which this Prospectus is part, completely and with the understanding that our actual future results may be materially different from what we expect. You should not assume that the information contained in this Prospectus or any prospectus supplement is accurate as of any date other than the date on the front cover of those documents.

Risks, uncertainties and other factors that may cause our actual results, performance or achievements to be different from those expressed or implied in our written or oral forward-looking statements may be found in this Prospectus under the heading “Risk Factors.”

Forward-looking statements speak only as of the date they are made. You should not put undue reliance on any forward-looking statements. We assume no obligation to update forward-looking statements to reflect actual results, changes in assumptions or changes in other factors affecting forward-looking information, except to the extent required by applicable securities laws. If we do update one or more forward-looking statements, no inference should be drawn that we will make additional updates with respect to those or other forward-looking statements. New factors emerge from time to time, and it is not possible for us to predict which factors will arise. In addition, we cannot assess the impact of each factor on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. We qualify all of the information presented in this Prospectus particularly our forward-looking statements, by these cautionary statements.

Industry and Market Data

This Prospectus contains estimates made, and other statistical data published, by independent parties and by us relating to market size and growth and other data about our industry. We obtained the industry and market data in this Prospectus from our own research as well as from industry and general publications, surveys and studies conducted by third parties. This data involves a number of assumptions and limitations and contains projections and estimates of the future performance of the industries in which we operate that are inherently subject to a high degree of uncertainty and actual events or circumstances may differ materially from events and circumstances reflected in this information. We caution you not to give undue weight to such projections, assumptions and estimates. While we believe that these publications, studies and surveys are reliable, we have not independently verified the data contained in them. In addition, while we believe that the results and estimates from our internal research are reliable, such results and estimates have not been verified by any independent source.

PROSPECTUS SUMMARY

This summary highlights certain information contained elsewhere in this Prospectus. This summary is not intended to be complete and does not contain all of the information that you should consider in making your investment decision. You should carefully read this entire Prospectus, including our consolidated financial statements and the related notes and the information set forth under the headings “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” contained in this Prospectus before making an investment decision.

Unless the context otherwise requires, references to “we,” “our,” “us,” “Unusual” “Unusual Machines” or the “Company” in this Prospectus means Unusual Machines, Inc., a Puerto Rico corporation.

Company Background

We are a Puerto Rico corporation, originally incorporated July 11, 2019, with our principal place of business in San Juan, Puerto Rico. Our principal corporate office is located at 151 Calle De San Francisco, Ste 200 PMB 2106 San Juan, Puerto Rico 00901-1607 and our telephone number is +1 855-921-4600. Our corporate website is unusualmachines.com. Information on our website is not incorporated into this Prospectus.

The Company was incorporated in Puerto Rico under the name “Red Cat Motor Corporation” on July 11, 2019, before changing its name to “AerocarveUS Corporation” on October 20, 2020 and then to “Unusual Machines, Inc.” on July 5, 2022.

The Business Combination

On November 21, 2022, we entered into a Share Purchase Agreement (the “Purchase Agreement”) with Red Cat Holdings, Inc. (“Red Cat”) and Jeffrey Thompson, the founder and Chief Executive Officer of Red Cat, pursuant to which we agreed to purchase Red Cat’s consumer business consisting of Fat Shark and Rotor Riot. Fat Shark and Rotor Riot are in the business of designing and marketing consumer drones and first-person-view (“FPV”) goggles. Rotor Riot is also a licensed authorized reseller of consumer drones manufactured by third-parties. Under the terms of the Purchase Agreement, upon satisfaction of closing conditions including the affirmative vote of the shareholders of Red Cat and the closing of the Offering, Unusual will purchase from Red Cat its Rotor Riot and Fat Shark subsidiaries for $18 million in a combination of cash, a convertible note (referred to in this Prospectus as the “Senior Note”) and issuance of our Series A Convertible Preferred Stock (referred to in this Prospectus as the “Series A”). See “The Business Combination” for more information.

Business Overview

Simultaneous with the closing of this Offering, we will acquire Fat Shark Ltd., referred into in this Prospectus as “Fat Shark,” and Rotor Riot, LLC, referred into in this Prospectus as “Rotor Riot,” which are first-person view (“FPV”) drone technology market leaders. Because Unusual Machines is still in its development stage and has limited operations on a pre-transaction basis, the business-related and certain financial information in this Prospectus focuses on the business, products and operations of Fat Shark and Rotor Riot, which will entail the Company’s business focus following the acquisition. While each entity exists independently, their operations have been structured and developed to complement each other and operate largely in tandem, as the discussions contained elsewhere in this Prospectus describe in greater detail.

Fat Shark is a leader in FPV, designing and manufacturing ultra-low latency FPV video goggles for drone pilots, which it markets towards retail distributors including Rotor Riot. Rotor Riot is a rapidly growing e-commerce marketplace, backed by the largest community of FPV drone pilots in the world, and markets drones and drone-related products including Fat Shark goggles and competitor offerings, to end users of the drones and drone products including drone enthusiasts, hobbyists and competitive racers. Over the next two years, we expect that these businesses will continue to excel in the consumer FPV market, while expanding into new enterprise verticals like public safety and drone delivery. This is part of our vision to enable people to be part of the robotics revolution.

Headquartered in Puerto Rico, we intend to build both organically and through strategic acquisitions, by targeting companies within the highly fragmented drone industry that have valuable intellectual property, revenue generating customers, and exceptional teams.

The Drone Industry

The drone industry has expanded beyond its military origin to become a powerful tool for businesses and popular recreational activity. We expect both of these markets to continue to grow. According to a study by Insider Intelligence, total global drone shipments are estimated to reach 2.4 million in 2023 – increasing at a 66.8% compound annual growth rate (CAGR). Drone growth is expected to occur across all industries: direct to consumer (DTC), public safety, and drone delivery. For example, Reporter Link compiled a report in 2021 that projected the drone services market is expected to surpass $60 billion by 2025, from approximately $4.4 billion in 2018. International Data Corporation Markets has projected that the small drone market will increase from 3.8 billion in 2022 to 6.2 billion by 2027, and a CAGR of 10.1% from to 2022 to 2027. The Federal Aviation Administration (the “FAA”) has forecasted a 300% increase in commercial drones from 2019 to 2023 as per businessinsider.com.

Accordingly, we will pursue strategic acquisition targets in the FPV drone technology space that have the potential to improve our own hardware and software solutions, rapidly grow our revenues, open new industry verticals, and integrate best in class intellectual property and teams. We believe that very promising, private companies (such as those we will likely target) are in many instances grossly underfunded and missing out on the ability to go public and bring their innovative products and solutions to a larger set of customers globally. Unlocking this potential will be key to industry consolidation and breaking the dominance of China in the drone industry. We stand at the forefront of this important trend.

Exclusively FPV

Fat Shark and Rotor Riot principally operate in the drone FPV segment of the industry. This segment focuses on drones piloted with wearable display devices. These are head mounted displays (“HMDs”) or goggles for drone pilots. These goggles give pilots FPV perspective to control their drone in flight. This is a unique experience where the pilot is interacting with an aircraft through visual immersion. In this augmented reality (AR), the pilot sees only what the drone sees, as if sitting in the pilot seat. This experience is accomplished by live streaming footage from a camera mounted on the nose of the drone directly into specially designed goggles worn by the pilot. The image is transmitted via radio (traditionally analog but increasingly digital) to the pilot. The drone remote control unit, the drone, and the FPV goggles are all interconnected via radio. This effect requires sophisticated electronics that transmit visual information with sufficient speed and reliability to allow pilot control over the drone in real-time. Pilots routinely achieve speeds of over 90 mph in racing and other mission critical applications.

There are three common categories of FPV flight – freestyle flight, racing, and aerial photography. In freestyle, the pilot navigates around obstacles focused on acrobatics and exploring the environment around the aircraft through the HMD. This type of flight can be used for public safety as well as package delivery. FPV racing describes a growing spectator sport where pilots fly their drones in competitions through a series of obstacles, flags, and gates in a racetrack. Aerial photography is the process of viewing and recording a subject matter from the air from the viewpoint of the pilot.

Plans for Growth, Development, and Expansion

We plan to strengthen our market position through continued revenue growth. In parallel, we are aggressively investing in the development or acquisition of FPV products and services that serve a broad set of industries including consumer, public safety, and drone delivery. Our business strategy includes (i) increasing our overall customer base with a superior product and rapid adoption; (ii) investing in new products and IP, beginning with the Fat Shark and Rotor Riot acquisitions, (iii) exploring and pursuing acquisitions of additional products, teams and technologies that complement and expand the functionality of the FPV goggles offered by Fat Shark and the inventory and marketing capabilities of Rotor Riot; (iv) expanding and growing our customer base and revenue streams from our existing customer base using a “land-and-expand” model that establishes initial relationships and grows those relationships through the provision of high quality products and services, (v) enhancing our products to improve the integration of third-party solutions; (vi) targeting underserved drone pilots as customers and as potential marketing partners, and (viii) seeking strategic partnerships and sponsorships with companies that want access to the FPV community.

Risk Factors Summary

Our business and an investment in our common stock are subject to numerous risks and uncertainties, including those highlighted in the section titled “Risk Factors” immediately following this prospectus summary. Some of these risks include:

Summary of the Offering

Summary Combined Pro Forma Financial Data

The following summary combined pro forma statements of operations for the years ended December 31, 2022 and 2021 and summary combined pro forma balance sheet data as of December 31, 2022 and 2021 have been derived from our, Fat Shark and Rotor Riot unaudited combined pro forma financial statements included elsewhere in this Prospectus. You should read this “Summary Combined Pro Forma Financial Data” section together with our financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this Prospectus. Our financial statements are prepared and presented in accordance with accounting principles generally accepted in the United States, or U.S. GAAP. Our historical results are not necessarily indicative of results expected for future periods.

RISK FACTORS

Any investment in our securities involves a high degree of risk. Investors should carefully consider the risks described below and all of the information contained in this Prospectus before deciding whether to purchase our securities. Our business, financial condition and results of operations could be materially adversely affected by these risks if any of them actually occur. This Prospectus also contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of certain factors, including the risks we face as described below and elsewhere in this Prospectus.

Risks Related to our Business and Financial Condition

Because Fat Shark and Rotor Riot’s auditors have qualified their reports on a going concern basis and with our history of losses, we may not be able to continue operating as a going concern.

We have experienced losses from operations since inception and have never generated positive cash flow. The success of our business plan during the next 12 months and beyond will be contingent upon generating sufficient revenue to cover our operating costs and obtaining financing from this Offering. The reports from Fat Shark and Rotor Riot’s independent registered public accounting firm for the fiscal year ended April 30, 2022 and prior years include an explanatory paragraph stating Fat Shark and Rotor Riot have each recurring net losses from operations, negative operating cash flows, and will need additional working capital for ongoing operations. These factors, among others, raise substantial doubt about each of Fat Shark and Rotor Riot’s ability to continue as a going concern. If we are unable to close this Offering, our business, prospects, financial condition and results of operations will be materially and adversely affected and we may be unable to continue as a going concern.

Because the Company will have no operating history prior to its acquisition of Fat Shark and Rotor Riot, any investment in us is highly speculative.

We plan to acquire Fat Shark and Rotor Riot simultaneously with the closing of this Offering. Both companies have been operated by Red Cat since their acquisition by Red Cat in 2020. While we expect the management of each target to remain, no Red Cat officer is joining us. Our management team will be headed by our executive officers together with individuals from Fat Shark and Rotor Riot, and our operations going forward are therefore subject to ordinary integration risks where two companies and two cultures are combined. Further, we may not accurately forecast customer behavior and recognize or respond to emerging trends, changing preferences or competitive factors facing us, and, therefore, we may fail to make accurate financial forecasts. Our current and future expense levels are based largely on our budgeted plans and estimates of future revenue. Similarly, if we are able to raise sufficient capital in this Offering or in future financing transactions, we may use a portion of the proceeds to acquire other operating businesses in our industry or in related industries to facilitate strategic growth and build our market presence and revenue potential. If we do acquire one or more businesses in the future, we may be unable to adjust our spending in a timely manner to compensate for any unexpected revenue shortfall, which could then force us to curtail our business operations or plan of operations or acquisitions.

Additionally, our current revenue projections are based largely on customer and partner relationships and contracts that are still the subject of negotiation, the results of which remain uncertain. Additionally, Fat Shark and Rotor Riot currently operate as subsidiaries of Red Cat, a holding company of drone-related businesses, which also holds two drone businesses that market products for government, industrial and military applications in addition to its consumer-focused product offerings which we will acquire through Fat Shark and Rotor Riot. Therefore, in addition to having no experience as a public company, our new operations will be subject to the risk of a lack of diversification, as today we are limited to drone products designed for consumer or recreational use rather than military or industrial applications. In the future, we may diversify our products beyond the consumer and recreational use but the timeline and success of those efforts are uncertain. Our new subsidiaries will lack the support they previously had in terms of their product development and production efforts, as they can no longer access the more vertically integrated resources that were available to them at Red Cat. The risk of this occurring will intensify if a recession occurs in the U.S. or global economy, as our future business is aimed at consumers whose spending patterns will likely decline as a result of inflation and the prospect of an economic downturn.

Our prospects must be considered in light of the uncertainties, risks, expenses, and difficulties frequently encountered by companies in their early stages of operations, integration and growth process. Due to these contingencies, we may be unable to achieve or maintain profitability in some or all of our business segments in a timely manner or at all, in which case you could lose all or some of your investment.

Fat Shark and Rotor Riot have incurred net losses since their acquisition by Red Cat and may fail to achieve or maintain profitability.

Since their acquisition by Red Cat in 2020, Fat Shark and Rotor Riot incurred net losses for each reported quarter with the exception of Fat Shark which reported a small net income in the quarter ended July 31, 2022. Further, Unusual Machines was formed in July 2019 and have not conducted any active business. Following our acquisition of Fat Shark and Rotor Riot, their operations will constitute our business. Further, each of Fat Shark and Rotor Riot had lower revenues and higher net losses in fiscal year 2022 compared to fiscal year 2021, and generally experience fluctuating revenue as a result of recurring seasonal sales cycles. We will need to generate higher revenues and control operating costs in order to attain profitability. There can be no assurances that we will be able to do so or to reach profitability.

We expect to continue to incur losses for the foreseeable future and we expect costs to increase in future periods as we expend substantial financial and other resources on, among other things:

These expenditures may not result in additional revenue or the growth of our business in the manner or to the extent anticipated or intended or at all. If following the acquisition of Fat Shark and Rotor Riot, we fail to grow revenue or to achieve or sustain profitability, our business, financial condition, results of operations, and prospects could be materially adversely affected and the market price of our common stock could be adversely affected.

If the proceeds of this Offering are insufficient to meet our working capital needs, and if we are then not able to obtain sufficient capital, we may be forced to limit the scope of our operations.

We expect that the net proceeds of this Offering after payment to Red Cat will be sufficient to meet our working capital needs. However, our future business is aimed at consumers who face inflation and the prospect of a recession. Accordingly, we may require substantial additional working capital. The expected use of net proceeds of this Offering represents our current intentions based upon our present plan and business conditions. As of the date of this Prospectus, we cannot specify with certainty all of the particular uses for the net proceeds to be received upon the completion of this Offering. We will have broad discretion in the application of the net proceeds in the category of working capital and general corporate purposes, including acquisitions, and to fund ongoing operations and expansion of our business, and investors will be relying on our judgment regarding the application of the net proceeds of this Offering other than payments to Red Cat. Depending on the outcome of our business activities and other unforeseen events, our plans and priorities may change and we may apply the net proceeds of this Offering in different proportions than we currently anticipate.

There can be no assurance that our businesses will reach profitability. If adequate additional debt and/or equity financing is not available on reasonable terms or at all, then we may not be able to continue to develop our business activities, and we will have to modify our business plan. These factors could have a material adverse effect on our future operating results and our financial condition.

Our ability to raise financing through sales of equity linked securities depends on general market conditions and the demand for our common stock. We may be unable to raise adequate capital through sales of equity linked securities, and if our stock price is lower than the Offering price at the time of such sales, our existing stockholders could experience substantial dilution. Debt transactions often include restrictive covenants that could limit our ability to engage in strategic transactions, acquire complimentary businesses, or adjust to changing market environments as quickly or efficiently as we otherwise would or at all. Further, if adequate financing is not available or is unavailable on acceptable terms, we may find we are unable to fund our planned expansion, continue offering the Fat Shark and Rotor Riot products, take advantage of acquisition opportunities, develop or enhance or products, or to respond to competitive pressures in the industry which may jeopardize our ability to continue operations.

Because of the price protection contained in the Series A and the Senior Note, if we raise money in the future at priced below $4.00, investors will experience dilution which may be significant.

Both the Series A and the Senior Note are convertible at $4.00 per share and each contain standard full ratchet price protection that if we raise money at lower prices, the conversion prices of the Series A and Senior Note are adjusted to the same price as used in any future financing, subject to customary exceptions. As a result investors may sustain substantial dilution if we raise money in the future at lower prices. For example, at $4.00 per share, the Series A and Senior Note converts into 2,675,000 shares and 625,000 shares, respectively. At $3.00 per share, the Series A and Senior Note converts into 3,500,000 shares and 833,333 shares, respectively. At $1.00 per share, the Series A and Senior Note converts into 10,500,000 shares and 2,500,000 shares, respectively. Accordingly, if we raise money at increasingly lower prices, the dilution impact will be more significant.

If we lose key personnel, it may adversely affect our business.

Our future success depends in large part on the continued contributions of our executive officers, members of senior management and other key personnel, particularly Brandon Torres Declet, our Chief Executive Officer and Chairman of the Board. As more fully described elsewhere in this Prospectus, Mr. Declet’s leadership, knowledge and experience in the drone industry is expected to be crucial to our business plan and any future successes and progress we experience. The loss of Mr. Declet’s services would therefore materially adversely affect our business and prospects. We have “key person” insurance in place for Mr. Declet but not for any other officers or employees. Our executive officers, senior management and key personnel are all employed on an at-will basis, which means that they could terminate their employment with us at any time, for any reason and without notice. The loss of any of our key management personnel could significantly delay or prevent the achievement of our development and strategic objectives and adversely affect our business.

Conflicts of interest involving our management team and other parties could materially harm our business.

Our management team on which we heavily depend are or may become involved in other endeavors giving rise to conflicts of interests that are adverse to the Company. For example, Brandon Torres Declet, our Chief Executive Officer has business interests in ventures that operate in the drone industry outside our Company. See “Management and Board of Directors.” These arrangements could cause Mr. Declet to be unable or decline to devote sufficient time and attention to our Company at the expense of these other ventures, and/or to face a conflict of interest, financial or otherwise, adverse to us and in favor of these other ventures. Accordingly, from time-to-time our management may not devote their full time and attention to our affairs, which could have a material adverse effect on our operating results, and there can be no assurance that other conflicts of interest will not arise from their other business ventures, any of which could materially and adversely impact our business. Other members of our management team and Mr. Jeffrey Thompson and Thomas Walker, members of our Board of Directors also have significant roles and interests in other drone companies, which pose similar threats to us as those described as to Mr. Declet.

In addition, the primary contract manufacturer for Fat Shark headsets is Shenzhen Fat Shark Co Ltd. (the “Supplier”), a company located in China which is majority-owned by Molly Mo, who is the wife of Greg French, founder and former owner of Fat Shark prior to its acquisition by Red Cat. These relationships could result in Mr. French diverting his time, resources and corporate opportunities to this other entity rather than the Company. The Company expects to procure Mr. French’s services as a consultant of Fat Shark in connection with the Business Combination.

Finally, Rotor Riot offers a variety of drone products through its website, which includes a number of product offerings from competitors in the drone industry. While these relationships have enabled us to generate revenue, by virtue of their involvement in the sale of drones and drone-related products these customers also have interests that are adverse to ours, and may determine to reduce their expenditures on our products in the future and/or to vertically integrate their operations to reduce or eliminate their reliance on our products.

Any of the foregoing developments could result in materially adverse consequences to our Company, results of operations and financial condition.

If we are unable to attract new customers or maintain and grow Fat Shark and Rotor Riot existing customer relationships in a manner that is cost-effective, our revenue growth could be slower than we expect and our business may be harmed.

To increase our revenue following the acquisition of Fat Shark and Rotor Riot, we must add new customers, upsell to our existing customers, enhance our products with features that set us apart from our competitors, and effectively develop and market new products that enable us to maintain and expand our brand and market share. Demand for our products is affected by a number of factors, many of which are beyond our control. Additionally, the projections and estimates about the future success and growth of the drone industry and demand for drone-related products such as ours, including those referenced elsewhere in this Prospectus, could prove to be incorrect, in which case our results of operations and prospects will decline. For example, if a recession, we expect that consumer spending, particularly for non-essential goods such as our drone products which are largely focused on recreational uses, may decline, limiting our ability to attract or maintain a sufficient customer base to achieve or maintain the revenue we seek in the development and sale of our products. Even if we do attract customers, the cost of new customer acquisition may prove so high as to prevent us from achieving or sustaining profitability.

Our future success also depends on our ability to increase the use of our products and solutions within and across our existing customers and future customers. While we believe there is a significant opportunity to further expand within Fat Shark and Rotor Riot’s existing customer base, including due to our planned employment of a “land-and-expand” business model in which we plan to establish relationships with new customers and grow those relationships over time by providing high quality products and services, our growth prospects depend on our ability to persuade customers to buy more product, and if we fail to do so, our business goals and prospects may not be achieved to the extent sought or anticipated or at all.

Future operating results and key metrics may fluctuate significantly from period-to-period due to a wide range of factors, which makes our future results difficult to predict.

Our operating results and key metrics could vary significantly from quarter-to-quarter as a result of various factors, some of which are outside of our control, including:

Any one of these or other factors discussed elsewhere in this Prospectus may result in fluctuations in our operating results, meaning that quarter-to-quarter comparisons may not necessarily be indicative of our future performance.

Our failure to effectively manage our growth could harm our business.

Other than our Agreement with Red Cat to acquire Fat Shark and Rotor Riot, we have no operating business. Businesses, including development stage companies such as ours which often grow rapidly, may have difficulty managing their growth. These challenges are exacerbated in circumstances such as ours following a recent acquisition of operating businesses. We intend to expand the number and types of products we sell as we grow, if and as capital becomes available. Further, because of our reliance on consumer spending which depends on novelty and social trends, and the rapid and constant technologically advancements that characterize our industry, we are subject to periodic sales cycles, and we will therefore need to replace and regularly introduce on a timely basis new products and technologies, enhance existing products, and effectively stimulate customer demand for new products and upgraded or enhanced versions of our existing products. Similarly, because our product offerings are largely dependent on others’ drone-related products and activities, we may need to adjust or update as third parties advance or alter their technology and activities. If we are able to successfully develop, produce and market our products, we will likely need to incur additional expenditures and expand our personnel with additional employees and consultants who are capable of providing the necessary support. We cannot assure you that our management will be able to manage our growth effectively or successfully. Our failure to meet these challenges could cause us to lose money, and your investment could be lost. 

The replacement and expansion of our products is expected to place a significant strain on our management, operations and engineering resources. Specifically, the areas that are strained most by these activities include the following:

The drone industry relies on limited sources to supply certain components and materials used in the manufacturing of drones. Our intention is to purchase certain components from suppliers based in the United States, which may lead us to pay higher prices, or select parts from a more limited number of suppliers relative to our competitors, which would adversely impact our gross margin and operating results. Our operating results could be materially, adversely impacted if our suppliers do not provide the critical components used to assemble our products on a timely basis, at a reasonable price, and in sufficient quantities.

Our ability to meet customer demand depends, in part, on our ability to obtain timely and adequate delivery of components for our products. All of the components that go into the manufacturing are sourced from third-party suppliers.

Some of the key components used to manufacture our products come from a limited or single source of supply, or by a supplier that could potentially become a competitor. Our contract manufacturers generally purchase these components on our behalf from approved suppliers. We are subject to the risk of shortages and long lead times in the supply of these components and the risk that our suppliers discontinue or modify components used in our products. In addition, the lead times associated with certain components are lengthy and preclude rapid changes in quantities and delivery schedules.

If we lose access to components from a particular supplier or experience a significant disruption in the supply of products and components from a current supplier, we may be unable to locate alternative suppliers of comparable quality at an acceptable price, or at all, and our business could be materially and adversely affected. In addition, if we experience a significant increase in demand for our products, our suppliers might not have the capacity or elect not to meet our needs as they allocate components to other customers. Developing suitable alternate sources of supply for these components may be time-consuming, difficult and costly, and we may not be able to source these components on terms that are acceptable to us, or at all, which may adversely affect our ability to meet our development requirements or to fill our orders in a timely or cost-effective manner. Identifying a suitable supplier is an involved process that requires us to become satisfied with the supplier’s quality control, responsiveness and service, financial stability, labor and other ethical practices, and if we seek to source materials from new suppliers, there can be no assurance that we could do so in a manner that does not disrupt the manufacture and sale of our products.

Our reliance on single source, or a small number of suppliers involves a number of additional risks, including risks related to supplier capacity constraints, price increases, timely delivery, component quality, failure of a key supplier to remain in business and adjust to market conditions, delays in, or the inability to execute on, a supplier roadmap for components and technologies; and natural disasters, fire, acts of terrorism or other catastrophic events, including global pandemics.

We do not own or operate any manufacturing facilities. Certain components and services necessary for the manufacture of our products are available from only a limited number of sources, and other components and services are only available from a single source. Our relationship generally is on a purchase order basis and these firms do not have a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. These suppliers could discontinue sourcing merchandise for us at any time. If any of these suppliers were to discontinue its relationship with us, or discontinue providing specific products to us, and we are unable to contract with a new supplier that can meet our requirements, or if they or such other supplier were to suffer a disruption in their production, we could experience disruption of our inventory flow, a decrease in sales and the possible need to re-design our products. Any such event could disrupt our operations and have an adverse effect on our business, financial condition and results of operations. Several new and alternative suppliers have begun offering components suitable for use in our products. With new tooling and electronics, any one of these alternative components could be incorporated into our products but our costs could be higher, they may offer less performance, and, as a result, make our products too costly and less desirable.

If we are unable to attract, integrate and retain additional qualified personnel, including top technical talent, our business could be adversely affected.

Our future success depends in part on our ability to identify, attract, integrate and retain highly skilled technical, managerial, sales and other personnel, particularly as we attempt to expand our operations and further develop and market our products. We face intense competition for a limited number of qualified individuals with the requisite skills and experience from numerous other companies, including other software and technology companies, many of whom have greater financial and other resources than we do. These companies also may provide more diverse opportunities and better chances for career advancement. Some of these characteristics may be more appealing to high-quality candidates than those we have to offer. In addition, new hires often require significant training and, in many cases, take significant time before they achieve full productivity. We may incur significant costs to attract and retain qualified personnel, including significant expenditures related to salaries and benefits and compensation expenses related to equity awards, and we may lose new employees to competitors or other companies before we realize the benefit of our investment in recruiting and training them. Moreover, new employees may not be or become as productive as we expect, as we may face challenges in adequately or appropriately integrating them into our workforce and culture. In addition, as we move into new geographies, we will need to attract and recruit skilled personnel in those areas. We have limited experience with recruiting in geographic areas outside of the United States, and may face additional challenges in attracting, integrating and retaining international employees. If we are unable to attract, integrate and retain suitably qualified individuals who are capable of meeting our growing technical, operational and managerial requirements, on a timely basis or at all, our business will be adversely affected. Additionally, the Company will operate out of multiple locations including Florida and Puerto Rico subjecting it to local labor market conditions.

Risks Related to Our Sale of Drone-Related Products and Operations in the Drone Industry.

We operate in an emerging and rapidly evolving industry which makes it difficult to evaluate our business and future prospects.

The drone industry is relatively new and is growing rapidly. As a result, it is difficult to evaluate our business and future prospects. We cannot accurately predict whether, and even when, demand for our products will increase, if at all. The risks, uncertainties and challenges encountered by companies operating in emerging and rapidly growing industries include:

As such, our current expectations and projects about future events and trends may be different from the actual results. Furthermore, if we are unable to address any of the above challenges successfully, our business, financial condition, results of operations, and prospectus may be adversely affected by such failure.

We face competition from larger companies that have substantially greater resources which challenges our ability to establish market share, grow the business, and reach profitability.

The drone industry is attracting a wide range of significantly larger companies which have substantially greater financial, management, research and marketing resources than we have. The drone hardware and parts and components spaces are dominated by larger Chinese companies such as SZ DJI Technology Company, Ltd and T-Motor. With respect to our FPV products, current and potential future competitors also include a variety of established, well-known diversified consumer electronics manufacturers such as Samsung, Sony, LG Electronics (LGE), HTC, Lenovo, Epson, Yuneec, Boscam, Eachine, Walkera, SkyZone, MicroLED and large software and other products companies such as Alphabet Inc. (Google), Microsoft, Facebook and Snap. The large number of smaller and/or private companies focused on drone solutions also have competitive advantages over us which we may struggle overcome, particularly as we seek to further establish and grow our customer base. Our competitors may be able to provide customers with different or greater capabilities than we can provide, including technical qualifications, pricing, and key technical support. Many of our competitors may utilize their greater resources to develop competing products and technologies, leverage their financial strength to utilize economies of scale and offer lower pricing, and hire more qualified personnel by offering more generous compensation packages. On the other hand, other small business competitors may be able to offer more cost competitive solutions or may be able to adapt more quickly to market developments due to lower overhead costs, leveraging of their professional relationships and networks, geographic or specialty focuses or greater flexibility inherent in smaller operations and a lower number of personnel.

Among product and service features that drive competition in our industry are breadth of product line, quality and durability of products, stability, reliability and reputation of the provider, along with cost. Quantity discounts, price erosion, and rapid product obsolescence due to technological improvements are therefore common in our industry as competitors strive to retain or expand market share. The Company’s ability to compete effectively will depend on, among other things, the Company’s pricing models, quality of customer service, development of new and enhanced products and services in response to customer demands and changing technology, reach and quality of sales and distribution channels and capital resources. Competition could lead to an inability to sustain sales levels, a reduction in the rate at which the Company adds new customers, a decrease in the size of the Company’s market share and a decline in its customers and revenue. In order to secure sales, we may have to offer comparable products and services at lower pricing which could adversely affect our operating margins. Our inability to compete effectively against these larger companies could have a material adverse effect on our business, financial condition and operating results.

The development and manufacture of FPV goggles encompasses several complex processes and several steps of our production processes are dependent upon third party vendors, supply chains, the availability of printed circuit boards (PCBs), optics, and certain chips. Any change in availability of these components, manufacturing or design partners could result in delivery interruptions, which could adversely affect our operating results.

As we continue to develop our products, we must progress through the complex and challenging processes involved in the technology and designs on which Fat Shark and Rotor Riot products are founded. Fat Shark and Rotor Riot rely on third party suppliers for the resources needed to navigate these processes and expect to continue to rely on such parties when we reach the manufacturing and marketing stages. Our reliance on third-party manufacturers and service providers will entail risks to which we may not be subject if our future operations were more vertically integrated, including:

Given our early stages, our product technology and manufacturing processes are evolving which can result in production challenges and difficulties. We may be unable to produce our products in sufficient quantity and quality to maintain existing customers and attract new customers. In addition, we may experience manufacturing problems which could result in delays in delivery of orders or product introductions. Any of these events could lead to production and marketing delays or failure or impact our ability to successfully commercialize our products. If we fail to contract with third parties on favorable terms, coordinate with and supervise their services and contributions to our processes, and leverage those relationships to deliver quality products in a timely manner to customers, we could experience reductions or delays in revenue, reputational harm and diminished brand recognition, higher than expected expenses, or other adverse developments that would materially harm our business.

Several steps of our production processes are dependent upon certain critical machines and tools which could result in delivery interruptions and foregone revenues.

Fat Shark currently has no equipment redundancy to manufacture our products, meaning we will rely on a limited number of machines to perform a large quantity of steps in the manufacturing and assembly processes. Rotor Riot is limited by the number of personnel it has on staff to assemble custom drones. This may, among other things, delay delivery timelines or reduce our revenue and accounts receivable, and/or force us to rely more heavily on third parties to meet customer deadlines or volume demands, either of which will adversely affect our results of operation and ability to achieve and maintain profitability. If we experience any significant disruption in manufacturing, a serious failure of a critical piece of equipment, or an inability to hire personnel, we may be unable to supply products to our customers in a timely manner. Interruptions in our manufacturing could be caused by us or our partners including but not limited to equipment problems, the introduction of new equipment into the manufacturing process or delays in the delivery of new manufacturing equipment. Lead-time for delivery, installation, testing, repair and maintenance of manufacturing equipment can be extensive. We can provide no assurances that we will not lose potential sales or be able to meet production orders due to future production interruptions in our manufacturing lines.

We may not be able to procure necessary key components for our products or may produce or purchase too much inventory.

The drone industry, and the electronics industry as a whole, can be subject to business cycles. During periods of growth and high demand for products, we may not have adequate supplies of inventory on hand to satisfy customers’ needs. Furthermore, during these periods of growth, our suppliers may also experience high demand and, therefore, may not have adequate levels of the components and other materials that the Company requires to manufacture products so that it can meet customers’ needs. Our inability to secure sufficient components to produce products for customers, or similar challenges faced by the drone manufactures we serve, could negatively impact our sales and operating results. We may choose to mitigate this risk by increasing the levels of inventory for certain key components assuming we have available cash resources. Increased inventory levels can increase the potential risk for excess and obsolescence should our forecasts fail to materialize or if there are negative factors impacting our customers’ end markets. Such a risk becomes especially prevalent during a recession and market downturn. If we purchase too much inventory, we may have to record additional inventory reserves or write-off the inventory, which could have a material adverse effect on our gross margins and on its results of operations.

We may not be able to keep pace with technological advances; and we depend on advances in technology by other companies.

The drone industry in general, and the market for the sale of drone hardware and component parts in particular, continues to undergo significant changes, primarily due to technological developments. Because of the rapid growth and advancement of technology, shifting consumer tastes and the popularity and availability of other forms of activities, it is impossible to predict the overall effect these factors could have on potential revenue from, and profitability of the drone industry. The development of both drone-related software and hardware is a costly, complex and time-consuming process, and investments in product development often involve a long wait until a return, if any, can be achieved on such investment. We might face difficulties or delays in the development process that will result in our inability to timely offer products that satisfy the market, which might allow competing products to emerge during the development and certification process. We anticipate making significant investments in research and development relating to our products and technology, but such investments are inherently speculative and require substantial capital expenditures. Any unforeseen technical obstacles and challenges that we encounter in the research and development process could result in delays in or the abandonment of product commercialization, may substantially increase development costs, and may negatively affect our results of operations. In the time it takes to develop or improve upon a product, that product may become obsolete.

It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results from operations may be materially adversely affected. It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results of operations may be materially adversely affected. However, if we struggle to adapt to an industry-shifting technological advancement or competitor offerings that render our products relatively less attractive or obsolete, including due to competitive pressures we face relative to other drone companies, it could have a material adverse effect on our business.

Further, we rely on and will continue to rely on components of our products that are developed and produced by other companies over which we have limited control. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies, and our ability to procure them from such third parties in a timely manner and on economically feasible terms. We may, from time-to-time, contract with and support companies developing key technologies in order to accelerate the development of such products for our specific uses. Such activities might not result in useful technologies or components for us.

Lack of long-term purchase orders and commitments from customers may lead to a rapid decline in sales.

Customers issue purchase orders or use our e-commerce site solely at their own discretion, often shortly before the requested date of shipment. Both our distributor relationships through Fat Shark and our online sales through Rotor Riot entail short-term contracts under which customers are generally able to cancel orders (without penalty) or delay the delivery of products on relatively short notice, regardless of whether or not we are in default under our agreements. The online business involves retail customers who are not likely to be repeat customers unless a need arises for updated hardware or software solutions offered by us, which may not occur on a frequent basis, resulting in lack of reliable recurring revenue in that part of our business. In addition, current customers may decide not to purchase products for any reason. If those customers do not continue to purchase products, sales volume could decline rapidly with little or no warning.

We cannot rely on long-term purchase orders or commitments to protect from the negative financial effects of a decline in demand for products. Fat Shark and Rotor Riot typically plan production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. Fat Shark resellers issue purchase orders but they have options to reschedule or pay cancellation fees. The uncertainty of product orders makes it difficult to forecast sales and allocate resources in a manner consistent with actual sales. Moreover, expense levels and the amounts invested in capital equipment and new product development costs are based in part on expectations of future sales and, if expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. As a result of lack of long-term purchase orders and purchase commitments, and long product development lead times, we may experience a rapid decline in sales.

As a result of these and other factors, investors should not rely on revenues and operating results for any one quarter or year as an indication of future revenues or operating results. If quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of the common stock could fall substantially.

Our products require ongoing research and development and may experience technical problems or delays, which could lead the business to fail.

Our future research and development efforts will remain subject to all of the risks associated with the development of new products based on emerging and innovative technologies, including, for example, unexpected technical problems or the possible insufficiency of funds for completing development of these products. If technical problems or delays arise, further improvements in products and the introduction of future products could be adversely impacted, and we could incur significant additional expenses and the business may fail. Additionally, we may deploy significant capital or human resources towards developing or improving upon a product, only for such efforts to fail to yield the results we hoped for or intended, which would materially adversely affect our financial condition. This is an acute risk given the relatively new and evolving nature of the drone industry, and constant entrance of new market participants attempting to compete with us. Similarly, if we invest in product research and development efforts and a competitor brings a similar product to market before us, or alleges an infringement of their intellectual property, our ability to market the product or compete effectively could be lost. Any such development could materially harm our business.

If we are involved in litigation, it could harm our business or otherwise distract management.

If we become a party to a substantial, complex or extended litigation, it could cause us to incur large expenditures and could distract management. For example, lawsuits by licensors, consumers, employees or stockholders or litigation with federal, state or local governments or regulatory bodies could be very costly and disrupt business. As described elsewhere in these Risk Factors, our operations and products, as well as those of our customers, collaborators and product end-users, come with the inherent possibility of lawsuits arising from product liability, property damage and personal injury, breach of contract and product warranty claims, intellectual property infringement, regulatory violations and sanctions, and data privacy issues, any of which can result in costly and time-consuming litigation which would divert our limited human and capital resources and could cause other adverse impacts on our business such as reputational harm and loss of future business. While disputes from time-to-time are not uncommon, we may not be able to resolve such disputes on terms favorable to us which could have a material adverse impact on our results of operations and financial condition.

Among other things, claims could be brought against us if use and misuse of our products causes, personal injury or death. If a consumer causes damage to a person or property using our drone, we as a reseller of the drone could be sued for selling an allegedly defective product. The possibility that the foregoing events occur from events involving our products is particularly high, because we supply technology used in the operation of drones which is relatively novel and are frequently operated at high speeds and altitudes, and often in densely populated areas and/or by individuals who lack a high level of experience operating them. These characteristics increase the probability that injury or damage to personal property might occur, even absent a defect. Additionally, because Fat Shark’s products are used as ancillary or supplemental components of a drone’s functions, we may become involved in disputes arising from a third party’s actions or products that utilize its technology, even if we were not the direct cause of the issue. Any claims against us, regardless of their merit, could severely harm our financial condition, strain our management and other resources.

Product liability claims might be brought against us by customers, civilians or private entities or others using or otherwise coming into contact with our products. If we cannot successfully defend against product liability claims, we could incur substantial liability and costs. Regardless of merit or eventual outcome, product liability claims may cause:

We anticipate the risk of product liability and other claims related to our products and their uses will grow as our products begin to be used. We are unable to predict if we will be able to obtain or maintain insurance for such claims. Insurance coverage is becoming increasingly expensive. We do not have such insurance and we may not be able to obtain at a reasonable cost or in sufficient amounts to protect us against losses due to liability. A successful product liability claim or series of claims brought against us could cause our stock price to decline and, would adversely affect our results of operations and business.

Our business is highly dependent upon our brand recognition and reputation, and the failure to maintain or enhance our brand recognition or reputation, including due to our high reliance on online and social media platforms, would likely adversely affect our business and operating results.

We believe that maintaining and enhancing Fat Shark and Rotor Riot brand identity, and our reputation are critical to our relationships with customers and strategic partners and to our ability to attract new customers and strategic partners. We also believe that the importance of our brand recognition and reputation will continue to increase as competition in our market continues to develop. Our success in this area will depend on a wide range of factors, some of which are beyond our control, including the following:

Any of the foregoing developments or an inability to navigate these or other challenges to establish and grow our brand recognition and current and future product popularity could materially adversely affect us.

In addition, particularly with respect to Rotor Riot, we are highly dependent on online social media platforms such as Facebook, Instagram and YouTube to advertise our products, market our brand and develop and maintain customer loyalty. Each of these platforms requires that users adhere to strict terms and conditions governing content, communications and other activities on their platform, which are generally heightened for commercial uses such as ours. If we or third parties such as drone pilots who Rotor Riot uses to market our products online fail to adhere to these requirements, we could be limited, restricted or banned from some or all uses, which would materially adversely affect our business.

Future growth and ability to generate and grow revenue and achieve or maintain profitability may be adversely affected if our marketing initiatives are not effective in generating sufficient levels of brand awareness.

Our future growth and profitability will depend in large part upon the effectiveness and efficiency of our marketing efforts, including our ability to:

Planned marketing expenditures are unknown and may not result in increased total sales or generate sufficient levels of product and brand name awareness. We may not be able to manage marketing expenditures on a cost-effective basis.

Future acquisitions could disrupt our business and adversely affect our operating results, financial condition and cash flows.

We may make acquisitions that could be material to our business, operating results, financial condition and cash flows. Our ability as an organization to successfully acquire and integrate technologies or businesses is unproven. Acquisitions involve many risks, including the following:

We may not succeed in addressing these or other risks or any other problems encountered in connection with the integration of any acquired business. The inability to successfully integrate the business, technologies, products, personnel or operations of any acquired business, or any significant delay in achieving integration, could have a material adverse effect on our business, operating results, financial condition and cash flows.

Product quality issues and a higher-than-expected number of warranty claims or returns could harm our business and operating results.

The products that we sell could contain defects in design or manufacture. There can be no assurance we will be able to detect and remedy all defects in the hardware we sell, which could result in product recalls, product redesign efforts, loss of revenue, reputational damage and significant warranty and other remediation expenses. Similar to other mobile and consumer electronics, our products have a risk of overheating in the course of usage or upon malfunction. Any such defect could result in harm to property or in personal injury. If we determine that a product does not meet product quality standards or may contain a defect, the launch of such product could be delayed until we remedy the quality issue or defect. The costs associated with any protracted delay necessary to remedy a quality issue or defect in a new product could be substantial.

Fat Shark and Rotor Riot generally provide a one-year warranty on all of our products, except in certain European countries where it can be two years for some consumer-focused products. The occurrence of any material defects in our products could expose us to liability for damages and warranty claims in excess of our current reserves, and we could incur significant costs to correct any defects, warranty claims or other problems. In addition, if any of our product designs are defective or are alleged to be defective, we may be required to participate in a recall campaign. In part due to the terms of our warranty policy, any failure rate of our products that exceeds our expectations may result in unanticipated losses. Any negative publicity related to the perceived quality of our products could affect our brand image and decrease retailer, distributor and consumer confidence and demand, which could adversely affect our operating results and financial condition. Further, accidental damage coverage and extended warranties are regulated in the United States at the state level and are treated differently within each state. Additionally, outside of the United States, regulations for extended warranties and accidental damage vary from country-to-country. Changes in interpretation of the regulations concerning extended warranties and accidental damage coverage on a federal, state, local or international level may cause us to incur costs or have additional regulatory requirements to meet in the future in order to continue to offer our support services. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, reputational damage, penalties and other sanctions, which could harm our business and financial condition.

Estimated future product warranty claims may be based on a variety of factors including the expected number of field failures over the warranty commitment period, the term of the product warranty period, and the costs for repair, replacement and other associated costs. Because of the foregoing or other contingencies, these estimates could prove to be incorrect, such that our warranty obligations are higher than anticipated. Our warranty obligations may be affected by product failure rates, claims levels, material usage and product re-integration and handling costs. Should actual product failure rates, claims levels, material usage, product re-integration and handling costs, defects, errors, bugs or other issues differ from original estimates, we could end up incurring materially higher warranty or recall expenses than we anticipate, which would materially adversely affect our business.

Risks Related to Intellectual Property Protection

If third-party intellectual property infringement claims are asserted against us, it may prevent or delay our product development and commercialization efforts and have a material adverse effect on our business and future prospects.

Companies in the consumer electronics, wireless communications, semiconductor, AI, IT, and display industries steadfastly pursue and protect intellectual property rights, often times resulting in considerable and costly litigation to determine the validity of patents and claims by third parties of infringement of patents or other intellectual property rights. Other companies may hold or obtain patents or inventions or other proprietary rights in technology necessary for our business. If we are forced to defend against infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted.

Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are pursuing product development and sales. As the consumer electronics and drone industries expand and more patents are issued, the risk increases that our current and future products may be subject to claims of infringement of the patent rights of third parties. Third parties may assert that we are employing their proprietary technology without authorization. There may be third-party patents or patent applications with claims to inventions, materials, engineering designs, or methods of manufacture related to the design, use or manufacture of our products. Because patent applications can take many years to issue, there may be patent applications currently pending that may later result in patents that our products may infringe upon. Third parties may obtain patents in the future and claim that use of our technologies or those of third parties with which our technologies are integrated infringes on these patents. If any third-party patents were to be held by a court to cover the manufacturing process of any of our products, or any of the characteristics or related components thereof, the holders of any such patents may be able to block our ability to commercialize such product unless we obtained a license under the applicable patents, or until such patents expire. Similarly, if any third-party patents were to be held by a court to cover aspects of our or our customers’ or strategic partners’ products or processes, the holders of any such patents may be able to block our ability to develop and commercialize the applicable product unless we obtained a license or until such patent expires. In either case, such a license may not be available on commercially reasonable terms or at all.

Parties making intellectual property claims against us may obtain injunctive or other equitable relief, which could block our ability to further develop and commercialize one or more of our products. Defense of these claims, regardless of their merit, involves substantial litigation expense and diversion of our management’s attention from our business.

If we are unsuccessful in defending against patent infringement claims in any jurisdiction where such a dispute arises, our products could be found to infringe on the intellectual property rights of others. If a claim of infringement against us succeeds, we may have to pay substantial damages, possibly including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure. The financial harm caused by any such development with respect to intellectual property disputes and litigation will be heightened to the extent we do not possess, acquire or maintain adequate insurance coverage for these contingencies now or in the future. Further, if there is a successful claim of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease using one or more of our business or product names due to a successful trademark infringement claim against us, it could materially adversely affect our business.

We may depend on intellectual property rights including patent rights that have not yet been and may not be obtained by us, and our intellectual property rights and proprietary rights may not adequately protect our products.

Our commercial success will depend substantially on the ability to obtain patents and other intellectual property rights and maintain adequate legal protection for products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets. With the closing of this Offering, 12 issued patents, including four issued in the United States, and nine pending patent Applications, including two pending in the United States will be assigned to the Company (directly or through its acquisition of Fat Shark and Rotor Riot) by UAV Patent Corp. (“UAV”) a wholly-owned subsidiary of Red Cat, in each case with a non-exclusive, non-sublicensable royalty free perpetual license back to UAV for Red Cat and its present and future subsidiaries to make, use and sell products subject to such assigned patents and applications solely with respect to military and defense drone applications. See “Business - Intellectual Property” for more information.

We will apply for patents covering our products, services, technologies, and designs, as we deem appropriate. We may fail to apply for patents on important products, services, technologies or designs in a timely fashion, or at all. We do not know whether, and there can be no assurance that, any of our patent applications will result in the issuance of any patents. Even if patents are issued, they may not be sufficient to protect our products, technologies, or designs. Our existing and future patents may not be sufficiently broad to prevent others from developing competing products, technologies, or designs. Intellectual property protection and patent rights outside of the United States, particularly in China, are even less predictable. As a result, the validity and enforceability of patents cannot be predicted with certainty. Moreover, we cannot be certain whether:

The patents we own or license and those that may be issued to us in the future may be challenged, invalidated, rendered unenforceable or circumvented, and the rights granted under any issued patents may not provide us with proprietary protection or competitive advantages. Moreover, third parties could practice our inventions in territories where we do not have patent protection or in territories where they could obtain a compulsory license to our technology where patented. Such third parties may then try to import products made using our inventions into the United States or other territories. We cannot ensure that any of our pending patent applications will result in issued patents, or even if issued, predict the breadth, validity and enforceability of the claims upheld in our and other companies’ patents. Further, patents have a limited lifespan. In the United States, the natural expiration of a patent is 20 years after it is filed, although various extensions may be available. The life of a patent, and the protection it affords, is limited. When the patent life has expired for a product, we will become vulnerable to competition from competitors attempting to replicate the technology that was formerly patent protected. Further, if we encounter delays such as due to regulatory approvals, the time during which we will be able to market and commercialize a product under patent protection could be reduced.

Unauthorized parties may attempt to copy or otherwise use aspects of our processes and products that we regard as proprietary. While we plan to enter into written agreements with certain of our employees and consultants with terms designed to protect our intellectual property rights, there cannot be any assurance that these provisions will provide us the protection sought. Further, any third parties with whom we do not execute such agreements, such as certain of our suppliers, could attempt to dispute our intellectual property rights or misappropriate our technology or trade secrets. Policing unauthorized use of our proprietary information and technology is difficult and can be costly, and our efforts to do so may not prevent misappropriation of our technologies. We may become engaged in litigation to protect or enforce our patent and other intellectual property rights or in International Trade Commission proceedings to abate the importation of goods that would compete unfairly with our products and, if unsuccessful, these actions could result in the loss of patent or other intellectual property rights protection for the key technologies on which our business strategy depends.

We also rely in part on unpatented proprietary technology, and others may independently develop the same or similar technology or otherwise obtain access to our unpatented technology. We plan to require employees, contractors, consultants, financial advisors, suppliers, and strategic partners to enter into confidentiality and intellectual property assignment agreements (as appropriate), but these agreements may not provide sufficient protection for our trade secrets, know-how or other proprietary information.

The laws of certain countries do not protect intellectual property and proprietary rights to the same extent as the laws of the United States and, therefore, in certain jurisdictions including China, we may be unable to protect our products, services, technologies and designs adequately against unauthorized third-party copying, infringement or use, which could adversely affect our competitive position. To protect or enforce our intellectual property rights, we may initiate proceedings or litigation against third parties. Such proceedings or litigation may be necessary to protect our trade secrets or know-how, products, technologies, designs, brands, reputation, likeness, authorship works or other intellectual property rights. Such proceedings or litigation also may be necessary to determine the enforceability, scope and validity of the proprietary rights of others. Any proceedings or lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Additionally, we may provoke third parties to assert claims against us, which could invalidate or narrow the scope of our own intellectual property rights. We may not prevail in any proceedings or lawsuits that we initiate and the damages or other remedies awarded, if any, may be commercially valuable. The occurrence of any of these events may adversely affect our business, financial condition and operating results.

We will register for certain of our trademarks in several jurisdictions worldwide. In some jurisdictions where we will apply to register our trademarks, other applications or registrations may exist for the same, similar, or otherwise related products or services. If we are not successful in arguing that there is no likelihood of confusion between our marks and the marks that are the subject of the other applications or registrations owned by third parties, our applications may be denied, preventing us from obtaining trademark registrations and adequate protection for our marks in the relevant jurisdictions, which could impact our ability to build our brand identity and market our products and services in those jurisdictions. Whether or not our application is denied, third parties may claim that our trademarks infringe their rights. As a result, we could be forced to pay significant settlement costs or cease the use of these trademarks and associated elements of our brand in the United States or other jurisdictions.

Even in those jurisdictions where we are able to register our trademarks, competitors may adopt or apply to register similar trademarks to ours, may register domain names that mimic ours or incorporate our trademarks, or may purchase keywords that are identical or confusingly similar to our brand names as terms in Internet search engine advertising programs, which could impede our ability to build our brand identity and lead to confusion among potential customers of our products and services. If we are not successful in proving that we have prior rights in our marks and arguing that there is a likelihood of confusion between our marks and the marks of these third parties, our inability to prevent these third parties from using may negatively impact the strength, value and effectiveness of our brand names and our ability to market our products and prevent consumer confusion.

If we lose our rights under our third-party technology licenses, our operations could be adversely affected.

Our current or future products may depend in part on technology rights licensed from third parties. We could lose our exclusivity or other rights to use the technology under our licenses if we fail to comply with the terms and performance requirements of the licenses. In addition, certain licensors may terminate a license upon our breach and have the right to consent to sublicense arrangements. If we were to lose our rights under any of these licenses, or if we were unable to obtain required consents to future sublicenses, we could lose a competitive advantage in the market, and may even lose the ability to commercialize certain products or technologies completely. Either of these results could substantially decrease our revenues.

Further, to the extent we need to obtain licenses from third parties to advance our research and development efforts or commercialize or improve upon our products, we may fail to obtain these licenses at a reasonable cost or on reasonable terms, if at all. In that event, we would be unable to further develop and commercialize those products, which could harm our business significantly.

The licensing and acquisition of third-party intellectual property rights is a competitive practice, and companies that may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-party intellectual property rights that we may consider necessary or attractive in order to develop and commercialize our products. More established companies may have a competitive advantage over us due to their larger size and cash resources or greater hardware or software development, production and commercialization capabilities. We may not be able to successfully complete such negotiations and ultimately acquire the rights to the intellectual property surrounding product candidates that we may seek to acquire, in which case our business could be harmed.

Significant inflation could adversely affect our business and financial results.

The high rate of inflation and resulting pressures on costs and pricing of business such as ours focused on the manufacture and sale of electronics products could adversely impact our business and financial results. While inflation has created some salary pressure with our employees who wish to mitigate the impact of inflation, we have not yet suffered inflationary pressures in procurement. A rise in inflation can adversely affect us by increasing our operating costs, including by increasing the costs of materials, freight and labor, which have already been under pressure due to supply chain constraints and the effects of the COVID-19 pandemic and the recent shortage of chips. The Company has not identified, planned or taken any actions as of the date of this Prospectus to mitigate inflationary pressures. Further, in the U.S. the Federal Reserve has responded by increasing interest rates to combat inflation, however such increases may result in a reduced demand for our products and/or an economic downturn. In a highly inflationary environment, or any recession or economic downturn that may result, we may be unable to adjust our business is a manner that adequately addresses these challenges, and these developments could materially adversely affect our business, results of operations and financial condition.

Risks Related to Government Regulation of Our Operations and Industry

Failure to obtain necessary regulatory approvals from the FAA or other governmental agencies by us, our customers, or others who use our products, or limitations put on the use of unmanned aircraft systems, or “UAS,” in response to public privacy or safety concerns, may prevent us from expanding the sales of our drone solutions in the United States.

The regulation of UAS and drone solutions and component parts such as those we offer is subject to substantial change, with regulators including potential alterations, enhancements and additions to existing laws and regulations, and the ultimate treatment is uncertain. A substantial majority of our products are subject to drone-related regulations enforced by the FAA, either directly or due to their inclusion in UAS offered by third parties. Further, even if some of our operations or products are not directly subject to such regulations, Fat Shark’s customers’ operations of UAS that includes our products and technology are subject to those regulations, and their failure to comply will adversely affect our ability to sell to them in the future. Further, adverse regulatory actions such as enforcement proceedings affecting customers and other third parties with which we do business can also adversely affect us, even if the violation or harm alleged did not arise from our conduct or products. Generally, under current FAA regulations the failure to register a UAS, including model aircraft, in accordance with these rules may result in regulatory and criminal sanctions. The FAA may assess civil penalties up to $33,333. Criminal penalties include fines of up to $250,000 and/or imprisonment for up to three years. However, the FAA and other government bodies and agencies are considering changes to address the drone industry, which is relatively new and rapidly evolving. For more information on the laws and regulations applicable to us and our industry, as well as recent developments involving such laws and regulations and their actual and potential impact on us, see “Business – Government Regulations.” In addition, there exists public concern regarding the privacy and safety implications of the use of UAS. This concern has included calls to develop explicit written policies and procedures establishing usage limitations. We cannot assure you that the response from regulatory agencies, customers and privacy advocates to these concerns will not delay or restrict the adoption of UAS and related products and technologies in certain markets. These developments, and any additional regulatory or other burdens imposed on our business and industry due to public health and safety or other concerns presently faced by the drone industry, could harm us and our customers and suppliers by increasing compliance costs and restricting our operations and product offerings and uses, which could materially adversely affect us.

Rising threats of international tariffs, including tariffs applied to goods between the U.S. and China, may materially and adversely affect our business.

We are heavily dependent on Chinese imports for our products and operations. For example, a substantial majority of Rotor Riot’s products are manufactured, directly and indirectly, using Chinese vendors. In addition, Fat Shark’s principal contract manufacturer is located in China. We do not have any written agreements with our suppliers in China. We rely only on purchase orders. There are inherent risks and uncertainties regarding the enforcement of our rights with respect to our oral agreements and purchase orders. Should our suppliers in China fail to honor our oral agreements and purchasers orders we will not have any recourse against such suppliers under Chinese law. The legal system in China and the enforcement of laws, rules and regulations in China can change quickly and the Chinese government may intervene or influence the operations of our suppliers which would adversely impact our business insofar as we would have to seek other suppliers outside of China and such suppliers would most likely charge us more for our products. Rising threats of international tariffs, including tariffs applied to goods traded between the U.S. and China, could materially and adversely affect our business and results of operations. Since the beginning of 2018, there has been increasing rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding the possibility of instituting tariffs on the foreign imports of certain materials and products. During this trend, the U.S. and China imposed tariffs or announced proposed tariffs to be applied in the future to certain of each other’s exports. Beginning in 2019, the former Trump administration imposed tariffs on imports of electronics products, including drones and component parts, of up to 25%. These tariffs apply to the vast majority of Rotor Riot’s and Fat Shark’s respective inventory, and Rotor Riot has in the past been, and either or both entities may in the future be, forced to implement price increases to adjust to the higher costs of production and sale, which imposes the risk of reduced demand for such products and lower sales and resulting revenue. Further, we do not know if the Biden administration will implement any, or alter current tariffs, in a manner adverse to us. These tariffs or any further costs or restrictions imposed on products that we import, could require us to raise our prices, which may result in the loss of customers and harm our business, particularly since we rely on consumer spending and our products a are typically considered non-essential, and purchases are therefore highly price sensitive.

In addition, changes in political conditions in China and changes in the state of China-U.S. relations, including any tensions relating to potential military conflict between China and Taiwan, are difficult to predict and could adversely affect the operations or financial condition of the Company. In addition, because of our involvement in the Chinese market, any deterioration in political or trade relations might cause a public perception in the U.S. or elsewhere that might cause our business to become less attractive. Such an impact could adversely affect our revenues and cash flows.

We are or may become subject to governmental export and import controls, economic sanctions and other laws and regulations that could subject us to liability and impair our ability to compete in international markets.

While we understand Fat Shark and/or Rotor Riot have had minimal sales outside of the U.S., we expect to seek to market our products outside of the U.S. The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of some technologies. Our products are subject to U.S. export controls, including the Commerce Department’s Export Administration Regulations and various economic and trade sanctions regulations established by the Treasury Department’s Office of Foreign Assets Controls, and exports of our products must be made in compliance with these laws. Furthermore, U.S. export control laws and economic sanctions prohibit the provision of products and services to countries, governments, and persons targeted by U.S. sanctions. Even though we take precautions to prevent our products from being provided to targets of U.S. sanctions, our products, including our firmware updates, could be provided to those targets or provided by our customers despite such precautions.

Further, the manufacture and sale of our products in certain states and countries may subject us to environmental and other regulations. For example, many of Fat Shark and Rotor Riot’s products rely on electricity generated by lithium-ion batteries, which implicate a variety of environmental and other regulations designed to control the production, use, and transportation of hazardous materials such as lithium and other components and minerals deployed in these batteries. In addition, the increasing global focus on climate change, including greenhouse gas (“GHG”) emissions, has resulted in legislative and regulatory efforts to address the causes and impacts of climate change, and any new and more strict laws and regulations to reduce GHG emissions and address other aspects of climate change, including carbon taxes, cap and trade programs, GHG reduction requirements, requirements for the use of green energy, and changes in procurement requirements, may result in increased operational and compliance obligations, which could adversely affect our financial condition and results of operations.

Our failure to obtain required import or export approval or to comply with other applicable domestic or international laws and regulations for our products or operations could harm our international and domestic sales and adversely affect our revenue, or could subject us to costly proceedings, penalties or damages and negative publicity.

If we fail to comply with U.S. and foreign laws related to privacy, data security, and data protection, it could adversely affect our operating results and financial condition.

We, either directly or through our customers, collaborators or end-users of our products, are or may become subject to a variety of laws and regulations regarding privacy, data protection, and data security. This includes the European Union’s (“EU”) General Data Protection Regulation (the “GDPR”) as a result of our sales in the EU. These laws and regulations are continuously evolving and developing. The scope and interpretation of the laws that are or may be applicable to us are often uncertain and may be conflicting, particularly with respect to foreign laws. The application of these laws and regulations can arise from our e-commerce platform, social media activities, drone technology and applications, relationships with third parties and their operations, or from other activities we undertake now or that we may undertake in the future. Data privacy and protection regulations are frequently broad in terms of scope of the information protected, activities affected, and geographic reach.

In particular, there are numerous U.S. federal, state, and local laws and regulations and foreign laws and regulations regarding privacy and the collection, sharing, use, processing, disclosure, and protection of personal data. Such laws and regulations often vary in scope, may be subject to differing interpretations, and may be inconsistent among different jurisdictions. For example, the GDPR includes operational requirements for companies that receive or process personal data of residents of the European Union that are broader and more stringent than those previously in place in the European Union and in most other jurisdictions around the world. The GDPR includes significant penalties for non-compliance, including fines of up to €20 million or 4% of total worldwide revenue. Additionally, in June 2018, California enacted the California Consumer Privacy Act (the “CCPA”). The CCPA requires covered companies to provide California consumers with new disclosures and will expand the rights afforded consumers regarding their data. Fines for noncompliance may be up to $7,500 per violation. Since the CCPA was enacted, Nevada, Maine, Colorado and Virginia have enacted similar legislation designed to protect the personal information of consumers and penalize companies that fail to comply, and other states have proposed similar legislation. The costs of compliance with, and other burdens imposed by, the GDPR, CCPA, and similar laws may limit the use and adoption of our products and services and/or require us to incur substantial compliance costs, which could have an adverse impact on our business.

In the U.S., at least 35 states and the District of Columbia introduced or considered almost 200 consumer privacy bills in 2022. More and more states will continue to enact similar laws. Additionally, in June 2022 the American Data Privacy and Protection Act was introduced in the U.S. House of Representatives. As introduced this proposed legislation would establish requirements for how companies handle personal data by, among other things, limiting the collection, processing, and transfer of personal data to that which is reasonably necessary to provide a requested product or service, prohibiting companies from transferring individuals’ personal data without their affirmative express consent, establishing a right to access, correct, and delete personal data, requiring companies to provide individuals with a means to “opt out” of advertising, requiring companies to implement security practices aimed at protecting personal data, and imposing enforcement actions and the possibility of civil proceedings for violations. Proposed federal legislation, like the American Data Privacy and Protection Act, will likely continue to be debated and, at some point, may be enacted in some form.

We intend to strive to comply with all applicable laws, policies, legal obligations, and industry codes of conduct relating to privacy, data security, and data protection. Our limited resources may adversely affect our compliance effort. Given that the scope, interpretation, and application of these laws and regulations are often uncertain and may be in conflict across jurisdictions, it is possible that these obligations may be interpreted and applied in a manner that is inconsistent from one jurisdiction to another and may conflict with other rules or our practices. Any failure or perceived failure by us, customers, or third-party vendors or end-users involved with our products to comply with our privacy or security policies or privacy-related legal obligations, or any compromise of security that results in the unauthorized release or transfer of personal data, may result in governmental enforcement actions, litigation, or negative publicity, and could have an adverse effect on our operating results and financial condition.

Governments are continuing to focus on privacy and data security, and it is possible that new privacy or data security laws will be passed or existing laws will be amended in a way that is material to our business. Any significant change to applicable laws, regulations, or industry practices regarding the personal data of our employees, agents or customers could require us to modify our practices and may limit our ability to expand or sustain our salesforce or bring our products to market. Changes to applicable laws and regulations in this area could subject us to additional regulation and oversight, any of which could significantly increase our operating costs and materially affect our operating results and financial condition.

Any failures of or damage to, attack on or unauthorized access to our information technology systems or facilities or disruptions to our continuous operations, including the systems, facilities or operations of third parties with which we do business, such as resulting from cyber-attacks, could result in significant costs, reputational damage and limits on our ability to conduct our business activities.

Our operations will depend on information technology infrastructure and computer systems, both internal and external, to, among other things, record and process customer and supplier data, marketing activities and other data and functions and to maintain that data and information securely. In recent years, several organizations have suffered successful cyber-attacks launched both domestically and from abroad, resulting in the disruption of services to customers, loss or misappropriation of sensitive or private data and reputational harm. If we are subject to a cyber-attack, we could suffer a similar breach or suspension in the future. Further, we may be unaware of a prior attack and the damage caused thereby until a future time when remedial actions cannot be taken. Cyber-threats are often sophisticated and are continually evolving. We may not implement effective systems and other measures to effectively identify, detect, prevent, mitigate, recover from or remediate the full diversity of cyber-threats or improve and adapt such systems and measures as such threats evolve and advance in their ability to avoid detection.

A cyber-security incident, or a failure to protect our technology infrastructure, systems and information and our customers, suppliers and others’ information against cyber-security threats, could result in the theft, loss, unauthorized access to, disclosure, misuse or alteration of information, system failures or outages or loss of access to information. The expectations of our customers and regulators with respect to the resiliency of our systems and the adequacy of our control environment with respect to such systems may increase as the risk of cyber-attacks, which is presently elevated due to the recent work-from-home environment arising from the COVID-19 pandemic, and the consequences of those attacks become more pronounced. We may not be successful in meeting those expectations or in our efforts to identify, detect, prevent, mitigate and respond to such cyber-incidents or for our systems to recover in a manner that does not disrupt our ability to provide products and services to our customers or product personal, private or sensitive information about our business, customers or other third parties.

Further, in March 2022 the SEC proposed new rules designed to enhance and standardize disclosure requirements related to cybersecurity incident reporting and cybersecurity risk management, strategy, and governance. Specifically, the proposed rules would impose a new Form 8-K disclosure requirement about material cybersecurity incidents within four business days after a registrant determines that it has experienced such an incident, add requirements to Forms 10-Q and 10-K to require updates to previously disclosed cybersecurity incidents, require disclosure of previously undisclosed immaterial cybersecurity incidents that have become material in the aggregate; and require disclosure about the cybersecurity expertise, if any, of members of the Company’s Board of Directors. Under the proposed rule, any unauthorized incident that has compromised the confidentiality, integrity, or availability of an information asset (data, system, or network); or violated the company’s security policies or definitions of “cybersecurity incident” and “information systems” would be incorporated into the proposed rules. If the proposed rules are adopted as currently drafted or as may be modified, we expect to incur material additional compliance and reporting costs, including monitoring, collecting, and analyzing data concerning cyber-security incidents and evaluating and preparing the required disclosure.

The failure to maintain an adequate technology infrastructure and applications with effective cyber-security controls could impact operations, adversely affect our financial results, result in loss of business, damage our reputation or impact our ability to comply with regulatory obligations, leading to regulatory fines and sanctions. We may be required to expend significant additional resources to modify, investigate or remediate vulnerabilities or other exposures arising from cyber-security threats. Failing to prevent or properly respond to a cyber-attack could expose us to regulatory fees or civil liability, cause us to lose customers or suppliers, prevent us from offering our products including due to resulting regulatory action, impair our ability to maintain continuous operations, and inhibit our ability to meet regulatory requirements.

Risks Related To Our Common Stock and this Offering

Our management will have significant discretion over our use of the net proceeds from this Offering and we may use these proceeds in ways with which you may not agree.

Other than payments to Red Cat for the purchase of Fat Shark and Rotor Riot, and if the Red Cat Note is not converted, our management will have considerable discretion in deciding how to apply net proceeds of this Offering. You will not have the opportunity to assess whether the proceeds are being used appropriately before you make your investment decision. You must rely on the judgment of our management regarding the application of the net proceeds of this Offering. We cannot assure you that the net proceeds will be used in a manner that would improve our results of operations or increase our stock price. See “Use of Proceeds.”

Because the market price of shares of our common stock is subject to fluctuation, you may not be able to sell your common stock at the Offering price.

The market prices of shares of our common stock may fluctuate significantly in response to factors, some of which are beyond our control, including:

Recently, the stock market, in general, has experienced extreme price and volume fluctuations due to, among other factors, concerns involving inflation, the Federal Reserve interest rate increases, supply chain shortages, recession fears, and geopolitical turmoil including the war in Ukraine. Continued market fluctuations could result in extreme market volatility in the price of our common stock which could cause a decline in the value of our common stock below the Offering price.

Our stock price may be volatile, which could result in substantial losses to investors.

In addition to changes to market prices based on our results of operations and the factors discussed elsewhere in this “Risk Factors” section, the market price of and trading volume for our common stock (including any stock-run ups or price declines) may change for a variety of other reasons, not necessarily related to our actual operating performance. The capital markets have experienced extreme volatility particularly with small public companies with relatively smaller public floats that has often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock. In addition, the average daily trading volume of the securities of small companies can be very low, which may contribute to future volatility.

Factors that could cause the market price of our common stock to fluctuate significantly include:

Any of these factors, as well as broader market and industry factors, may result in large and sudden changes in the trading volume of our common stock (including stock run ups or price declines) and could seriously harm the market price of our common stock, regardless of our operating performance. This may prevent you from being able to sell your shares at or above the price you paid for your shares, if at all. In addition, following periods of volatility in the market price of a company’s shares, shareholders often institute securities class action litigation against that company. Our involvement in any class action suit or other legal proceeding could divert our senior management’s attention and could adversely affect our business, financial condition, results of operations and prospects.

Because our public offering price is substantially higher than our net tangible book value per share, you will experience immediate and substantial dilution.

If you purchase our common stock in this Offering, you will pay more for your common stock than the amount paid by our existing shareholders for their common stock on a per share basis. As a result, you will experience immediate and substantial dilution of approximately $3.49 per share, representing the difference between the assumed public Offering price of $4.25 per share, and our pro forma as adjusted net tangible book value per share as of December 31, 2022 immediately upon the completion of this Offering.

Because our sole remedy under the Purchase Agreement in the event of any breaches of representations and warranties is to cancel some or all of the 450,000 shares of our common stock placed in escrow, the value of such shares maybe an insufficient remedy.

The Purchase Agreement contains representations and warranties made by Red Cat and Mr. Jeffrey Thompson, Red Cat’s Chief Executive Officer. Based upon negotiations with Red Cat and its counsel, we agreed that Mr. Thompson, one of our founders, our largest stockholder and a member of our Board shall deposit 450,000 shares of our common stock in escrow (the “Escrow Shares”) in order to be available in the event we claim Red Cat and/or Mr. Thompson have breached any of their respective representations and warranties contained in the Purchase Agreement. Red Cat has no liability for such breaches by it. That means if the value of the Escrow Shares is not at least equal to our damages, we will not have a remedy sufficient to permit us to recoup all of our damages. The only exception is fraud. Although we negotiated this limited remedy in good faith, it is possible that the Escrow Shares may not be sufficient in which case such breach may adversely and materially affect our common stock price.

If we incur any future impairment in the carrying value of our goodwill asset or write-off our general intangibles, it could depress our stock price.

On a combined pro forma basis, as of December 31, 2022, we had $11,841,723 of estimated goodwill and $1,302,667 of intangible assets on our balance sheet. Goodwill and intangible assets must be evaluated for impairment annually or more frequently if events indicate it is warranted. If the carrying value of a reporting unit asset exceeds its current fair value, the goodwill asset is considered impaired. Events and conditions that could result in impairment in the value of our goodwill and intangible assets include, but are not limited to, significant negative industry or economic trends, significant decline in the Company’s stock price for a sustained period of time, significant decline in market capitalization relative to net book value, limited funding that could delay development efforts, significant changes in the manner of use of the assets or the strategy for the Company’s overall business, or safety issues that surface during development efforts, or the end of our product life cycles that will result in impairment of good will. We may in the future be required to record impairment charges to write-off goodwill and intangible assets which is also related to our acquisition of Fat Shark and Rotor Riot. Our stock price could be negatively impacted should future impairments of our goodwill and/or intangible assets occur. On a combined pro forma basis, as of December 31, 2022, we also had $1,302,667 of estimated intangible assets, net on our balance sheet. A valuation will be performed upon closing of the Business Combination based on final assets acquired and liabilities assumed and final amounts of goodwill and other intangibles will be determined as a part of that valuation. To the extent that we may be required to write-off the value of our goodwill and/or our intangibles assets, our stock price could be adversely affected.

We will incur significant additional costs as a result of being a public company, and our management will be required to devote substantial time to compliance with our public company responsibilities and corporate governance practices.

Upon completion of this Offering, we expect to incur increased costs associated with corporate governance requirements that will become applicable to us as a public company, including rules and regulations of the SEC, under the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Customer Protection Act of 2010, and the Exchange Act, as well as the rules of Nasdaq. These rules and regulations are expected to significantly increase our accounting, legal and financial compliance costs and make some activities more time consuming, including due to increased training of our current employees, additional hiring of new employees, and increased assistance from consultants. We also expect these rules and regulations to make it more expensive for us to maintain directors’ and officers’ liability insurance. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our Board or as executive officers. Furthermore, these rules and regulations will increase our legal and financial compliance costs and will make some activities more time-consuming and costly. We cannot predict or estimate the amount of additional costs we will incur as a public company or the timing of such costs. In addition, our management team will need to devote substantial attention to interacting with the investment community and complying with the increasingly complex laws pertaining to public companies, which may divert attention away from the day-to-day management of our business, including operational, research and development and sales and marketing activities. Increases in costs incurred or diversion of management’s attention as a result of becoming a publicly traded company may adversely affect our business, prospects, financial condition, results of operations, and cash flows.

Our failure to maintain effective disclosure controls and internal controls over financial reporting could have an adverse impact on us.

We will be required to establish and maintain appropriate disclosure controls and internal controls over financial reporting. Failure to establish those controls, or any failure of those controls once established, could adversely impact our public disclosures regarding our business, financial condition or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting, disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

Because our common stock will be listed on Nasdaq, we will become subject to additional regulations and continued requirements.

We will not proceed with this Offering unless our common stock is listed on Nasdaq. Following the Offering, we will be required to meet the continued listing standards for Nasdaq. If we fail to meet Nasdaq’s listing standards, our common stock may be delisted. Nasdaq requires that the bid price of its listed common stock remain above $1.00 in order to remain listed. In addition, to maintain a listing on Nasdaq, we must satisfy minimum financial and other continued listing requirements and standards, including those regarding director independence and independent committee requirements, minimum stockholders’ equity, and certain corporate governance requirements. If we are unable to satisfy these requirements standards, our common stock could be subject to delisting. Delisting would have a negative effect on the price of our common stock and would impair your ability to sell our common stock when you wish to do so.

Our Board of Directors may authorize and issue shares of new classes of stock that could be superior to or adversely affect current holders of our common stock.

Our Board of Directors has the power to authorize and issue shares of classes of stock, including preferred stock that have voting powers, designations, preferences, limitations and special rights, including preferred distribution rights, conversion rights, redemption rights and liquidation rights without further shareholder approval which could adversely affect the rights of the holders of our common stock. In addition, our Board could authorize the issuance of a series of preferred stock that has greater voting power than our common stock or that is convertible into our common stock, which could decrease the relative voting power of our common stock or result in dilution to our existing common stockholders. In connection with the acquisition from Red Cat, we will issue it a Series A Convertible Preferred Stock which will have a liquidation preference over common stockholders of $4.00 and convert into 2,675,000 shares of common stock and may issue common stock or convertible securities in the future.

Any of these actions could significantly adversely affect the investment made by holders of our common stock. Holders of common stock could potentially not receive dividends that they might otherwise have received. In addition, holders of our common stock could receive less proceeds in connection with any future sale of the Company, in liquidation or on any other basis.

If we raise capital in the future may dilute our existing stockholders’ ownership and/or have other adverse effects on us, our securities or our operations.

If we are required to raise additional capital by issuing equity securities, our existing stockholders’ percentage ownership may decrease, and these stockholders may experience substantial dilution. Additionally, the issuance of additional shares of common stock or other securities could result in a decline in our stock price. Further, if we are required to raise additional funds by issuing debt instruments, these debt instruments could impose significant restrictions on our operations, including liens on our assets and negative covenants prohibiting us from engaging in certain transactions or corporate actions that may have the effect of limiting our ability to pursue our business strategy and growth objectives.

Common stock eligible for future sale may adversely affect the market.

The common stock sold in this Offering will be freely-tradable. Additionally, from time-to-time, certain of our stockholders may be eligible to sell all or some of their common stock by means of ordinary brokerage transactions in the open market pursuant to Rule 144 promulgated under the Securities Act of 1933 (the “Securities Act”), subject to certain limitations. In general, Rule 144 provides that any non-affiliate of the Company, who has held restricted common stock for at least 12 months, is entitled to sell their restricted stock freely, provided that the Company stays current in its SEC filings. Affiliates, which would include an officer, director or other person in control of the Company may sell after six months (beginning 90 days from the date of this Prospectus) with the following restrictions: (i) the Company is current in its SEC filings, (ii) certain manner of sale provisions, (iii) the filing of a Form 144, and (iv) volume limitations limiting the sale of shares within any three-month period to a number of shares that does not exceed 1% of the total number of outstanding shares. A person who has ceased to be an affiliate at least three months immediately preceding the applicable sale and who has owned such shares of common stock for at least six months may sell the shares under Rule 144 without regard to any of the limitations described above except for the current public information requirement.

Future sales of substantial amounts of our common stock in the public market, or the anticipation of these sales, could materially and adversely affect market prices prevailing from time-to-time, and could impair our ability to raise capital through sales of equity or equity-related securities. In addition, the market price of our common stock could decline as a result of sales of a large number of shares of our common stock in the market or the perception that these sales may occur.

If securities or industry analysts do not publish research or reports about our business, or if they adversely change their recommendations regarding our common stock, the market price for our common stock and trading volume could decline.

The trading market for our common stock will be influenced by research or reports that industry or securities analysts publish about our business. As of the date of this Prospectus, no analysts publish research reports about us, and we cannot assure you that any will. If analysts do, and one or more analysts who cover us downgrade our common stock, the market price for our common stock would likely decline.

We and our investors face the implications of our status as an emerging growth company under the federal securities laws and regulations.

We qualify as an “emerging growth company” pursuant to the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. As an emerging growth company we have elected to take advantage of specified reduced reporting and other requirements compared to those that are otherwise applicable generally to public companies. These provisions include but are not limited to: reduced disclosure obligations regarding executive compensation in periodic reports, proxy statements and registration statements; and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved.

We will remain an emerging growth company until the earliest of (a) the last day of the fiscal year during which we have total annual gross revenues of at least $1.07 billion; (b) the last day of our fiscal year following the fifth anniversary of the completion of this Offering; (c) the date on which we have, during the preceding three-year period, issued more than $1.0 billion in non-convertible debt; or (d) the date on which we are deemed to be a “large accelerated filer” under the Exchange Act, which would occur as of the end of any fiscal year if the market value of our common stock that are held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter. Once we cease to be an emerging growth company, we will not be entitled to the exemptions provided in the JOBS Act discussed above.

We have never paid dividends and we do not expect to pay dividends for the foreseeable future

We intend to retain earnings, if any, to finance the growth and development of our business and do not intend to pay cash dividends on shares of our common stock in the foreseeable future. The payment of future cash dividends, if any, depend upon, among other things, conditions then existing including earnings, financial condition and capital requirements, restrictions in financing agreements, business opportunities and other factors. As a result, capital appreciation, if any, of our common stock, will be your sole source of gain for the foreseeable future.

USE OF PROCEEDS

We estimate that the net proceeds from this Offering will be approximately $_________ after deducting estimated underwriting discounts and estimated offering expenses payable by us. If the underwriter exercises its over-allotment option in full, we estimate that the net proceeds will be approximately $_____________.

¹ Reflects estimated offering expenses, underwriting discounts, and commissions payable by us and assumes no exercise of the underwriters’ option to purchase additional shares of our common stock.

²  We intend to use $5,000,000, or approximately __% of the net proceeds of the Offering to pay Red Cat to consummate the Business Combination. See, “The Business Combination.” In addition, we intend to issue Red Cat the Senior Note in the amount of $2.5 million.

³ Includes approximately $231,000 that we owe to a related party for unfulfilled orders. See “Related Party Transactions” for more information. We intend to use approximately $_____, or _____% of the net Offering proceeds, for working capital and general corporate purposes.

The actual allocation of proceeds realized from this Offering will depend upon our operating revenues and cash position and our working capital requirements and may change.

Therefore, as of the date of this Prospectus, we cannot specify with certainty all of the particular uses for the net proceeds to be received upon the completion of this Offering. Accordingly, we will have discretion in the application of the net proceeds, and investors will be relying on our judgment regarding the application of the proceeds of this Offering.

Pending our use of the net proceeds from this Offering, we intend to invest the net proceeds in a variety of capital preservation investments, including short-term, investment-grade, interest-bearing instruments and U.S. government securities.

CAPITALIZATION

The following table sets forth our capitalization as of December 31, 2022:

The pro forma and pro forma as adjusted information below is illustrative only and our capitalization following the completion of this Offering is subject to adjustment based on the public offering price of our common stock. You should read this table in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included elsewhere in this Prospectus. The following table assumes the issuance of 2,352,941 shares of our common stock at $4.25 per share (the midpoint of the anticipated range of between $4.00-$4.50) and excludes the exercise of the over-allotment option by the underwriters and the issuance of the warrants to the underwriters.

________________ 

MARKET FOR OUR COMMON STOCK

Prior to this Offering, there has been no public market for our common stock. We expect that the initial public offering price will be between $____ and $_____ per Share. We intend to list the common stock on Nasdaq under the symbol “UMAC” However, there is no assurance that the Offering will be closed and our common stock will be trading on Nasdaq.

Holders

As of March 9, 2023, there were approximately 43 stockholders of record of our common stock.

Dividend Policy

We have never paid our stockholders cash dividends, and we do not anticipate paying any cash dividends in the foreseeable future as we intend to retain any earnings for use in our business. Any future determination to pay dividends will be at the discretion of our Board of Directors.

Shares Eligible for Future Sale

Future sales of substantial amounts of shares of our common stock in the public market, including shares issued upon the exercise of outstanding options or warrants, or upon conversion of convertible preferred stock or debt, or other securities which we have or may in the future issue, or the anticipation of these sales, could adversely affect market prices prevailing from time-to-time and could impair our ability to raise capital through sales of equity securities.

Upon completion of this Offering, we estimate that we will have _____ outstanding shares, calculated as of the date of this Prospectus by giving effect to the issuance of the shares hereunder, and assuming no exercise of the underwriter’s option. As of the date of this Prospectus, there are approximately ______ shares of common stock which may be sold pursuant to Rule 144 under the Securities Act of 1933.

DETERMINATION OF OFFERING PRICE

As there has been no public market for our common stock to date, the estimated fair value of our common stock has been determined by our board of directors as of the date of each option grant, with input from management, and recent third-party financings consummated by the Company.

Our Board of Directors considered various objective and subjective factors to determine the fair value of our common stock as of each grant date, including:

DILUTION

If you invest in our common stock in this Offering, your ownership interest will be diluted immediately to the extent of the difference between the public offering price per share of our common stock and the pro forma as adjusted net tangible book value per share of our common stock immediately after this Offering.

Our historical net tangible book value as of December 31, 2022 was $3,205,684, or $0.47 per share of our common stock. Our historical net tangible book value (deficit) is the amount of our total tangible assets less our total liabilities. Historical net tangible book value (deficit) per share represents our historical net tangible book value (deficit) divided by the 6,784,500 shares of our common stock outstanding as of December 31, 2022.

Our pro forma net tangible book value as of December 31, 2022 was $458,816, or $0.05 per share of our common stock. Pro Forma net tangible book value represents the amount of our total tangible assets, less our total tangible liabilities, after giving effect to the closing referred to the closing of the Business Combination. Pro forma net tangible book value per share represents pro forma net tangible book value divided by the total number of shares outstanding as of December 31, after giving effect to the shares of common stock and Series A issued to Red Cat assuming a $4.00 conversion price.

After giving effect to our issuance and sale of 2,352,941 shares of common stock in this Offering at an assumed initial public offering price of $4.25 per share (the midpoint of the assumed range of $4.00 and $4.50), and after deducting underwriting discounts and commissions and estimated offering expenses payable by us, and after giving effect to the closing referred to the closing of the Business Combination, our pro forma as adjusted net tangible book value as of December 31, 2022 would have been $8,920,991, or $0.76 per share. This represents an immediate increase in pro forma as adjusted net tangible book value per share of $0.71 to existing stockholders and immediate dilution of $3.49 in pro forma as adjusted net tangible book value per share to new investors purchasing common stock in this Offering. Dilution per share to new investors is determined by subtracting pro forma as adjusted net tangible book value per share after this Offering from the assumed initial public offering price per share paid by new investors. The following table illustrates this dilution on a per share basis:

If the underwriters exercise their option to purchase additional shares in full, our pro forma as adjusted net tangible book value per share after this Offering would be $_____ per share, representing an immediate increase in pro forma as adjusted net tangible book value per share of $____ to existing stockholders and immediate dilution in pro forma as adjusted net tangible book value per share of $_____ to new investors purchasing common stock in this Offering, based on the initial public offering price of $_____ per share, and after deducting underwriting discounts and commissions and estimated offering expenses payable by us. If any shares are issued upon exercise of outstanding options, you will experience further dilution.

The following table summarizes, on the pro forma as adjusted basis described above, the differences between the number of shares of common stock purchased from us, the total consideration paid to us and the average price per share paid by existing stockholders and by new investors purchasing shares of common stock in this Offering. The calculation below is based on the initial public offering price of $4.25 per share, before deducting underwriting discounts and commissions and estimated offering expenses payable by us:

The table above assumes no exercise of the underwriters’ option to purchase additional shares in this Offering. If the underwriters’ option to purchase additional shares is exercised in full, the number of shares of our common stock held by existing stockholders would be reduced to ___% of the total number of shares of our common stock outstanding after this Offering, and the number of shares of common stock held by new investors participating in the offering would be increased to __% of the total number of shares of our common stock outstanding after this Offering.

The number of shares purchased from us by existing stockholders is based on 6,934,500 shares of our common stock outstanding as of March 3, 2022, excludes:

THE BUSINESS COMBINATION

On November 21, 2022, the Company, Red Cat and Jeffrey Thompson, the founder and Chief Executive Officer of Red Cat, entered into the Purchase Agreement for the Company’s purchase of Red Cat’s consumer business consisting of recreational and hobbyist drones, first-person-view goggles, and as a licensed authorized reseller.

The execution and delivery of the Purchase Agreement followed an internal review by Red Cat of its military and enterprise opportunities to focus its efforts on its Made in America Class 1 ISR Drone development program and Red Cat’s Golden Eagle I, Golden Eagle II, Four Ship and swarm software under development.

Under the terms of the Purchase Agreement, upon satisfaction of closing conditions including the closing of the Offering, the approval of our common stock for listing on Nasdaq, and the affirmative vote of a majority of the disinterested stockholders of Red Cat following Red Cat’s filing with the SEC and mailing of its Proxy Statement in connection therewith, we will purchase Fat Shark and Rotor Riot, for $18 million in cash and securities of Unusual, as more fully-described below. Mr. Thompson, who holds approximately 24% of the voting power of Red Cat, shall abstain from the voting on approval of the Purchase Agreement.

The purchase price under the Purchase Agreement is equal to $5 million in cash (as increased for positive working capital and decreased for negative working capital at closing), $2.5 million in a convertible senior note of the Company (referred to in this Prospectus as the “Senior Note”) and $10.5 million in Series A Convertible Preferred Stock of the Company (referred to in this Prospectus as the “Series A”), payable at closing. The Senior Note and the Series A shall have the rights, privileges and preferences as set forth in the form of Senior Note and form of Series A Certificate of Designation in such form and subject to terms and conditions as are agreed by the Company and Red Cat prior to closing. The Senior Note and Series A will be convertible into our common stock in this Offering at the lesser of $4.00 per share or the public offering price and shall be subject to a Senior Note and the Series A Certificate of Designation (the “Certificate of Designation”) to be filed with the Secretary of State of Puerto Rico prior to closing. The Senior Note and Certificate of Designation shall contain beneficial ownership blockers under which conversion shall be limited to 4.99% and/or 9.99% of the total voting power of the Company, and further may be subject to limitations on voting and conversion required in order to conform with requirements of Nasdaq to the issuance of in excess of 19.99% of the outstanding Unusual Common Stock in accordance with Nasdaq Rule 5635(d). The Senior Note and Series A will include anti-dilution protection in the case of issuances by us at a price lower than the then applicable conversion price for so long as the Senior Note or Series A remains outstanding under which the conversion price will be reduced to such lower price as the Company shall issue or agree to issue any of its securities.

Under the terms of the Purchase Agreement Mr. Thompson and the Company have agreed to indemnification obligations, which shall survive for a period of nine months, subject to certain limitations, which includes a basket of $250,000 before any claim can be asserted and a cap equal to the value of the escrow shares, other than in cases involving fraud. Mr. Thompson agreed to deposit 450,000 shares of our common stock owned by him in to escrow to secure any indemnification obligations, which stock is our sole remedy in the event of any claims, except for fraud. See “Risk Factors” and “Related Party Transactions.”

As a condition to closing, the Company shall enter into an employment agreement with Mr. Brandon Torres Declet, our Chief Executive Officer, including non-compete provisions, which provisions cannot be amended or waived without the prior written consent of Red Cat. We, Fat Shark and Rotor Riot will also be subject to five-year non-competition agreements generally restricting activities involving Class I ISR drones for government and institutional customers and an agreement to refer government and institutional inquiries to Red Cat.

On November 21, 2022, the Company’s Board approved the Purchase Agreement. On November 21, 2022, the Board of Directors of Red Cat approved the Purchase Agreement and submission of the Purchase Agreement to stockholders for approval. In addition, closing of the Purchase Agreement is subject to successful completion of the Offering, and approval by Nasdaq of listing of our common stock. The Purchase Agreement requires that Red Cat is required to cooperate with us in connection with the Offering and to prepare and deliver to us audited and unaudited financial statements prepared in accordance with U.S. generally accepted accounting principles of Fat Shark and Rotor Riot, in such form and for such periods as are required to be included in the Registration Statement of which this Prospectus forms a part. We have agreed to register all of the common stock for which the Senior Note is convertible pursuant to a registration rights agreement for resale by Red Cat, or in lieu of issuing the Senior Note, to pay $2.5 million in cash with proceeds of the Offering at closing at our election.

In addition, we have agreed to enter into a Registration Rights Agreement for 100% of the common stock for which the Series A may be converted and to use our best efforts to file and have declared effective such Registration Statement, on demand and in on a piggy-back basis with any other Registration Statements to be filed by us.

Red Cat and the Company have verbally agreed to extend the March 30, 2023 end date in the Purchase Agreement and lower the minimum amount of the Offering from $15 million to $10 million to be memorialized in an amendment to the Purchase Agreement.

OUR BUSINESS

Overview

We are a development stage technology company which intends to acquire Fat Shark and Rotor Riot, from Red Cat pursuant to the Purchase Agreement which will close simultaneously with the closing of this Offering. Fat Shark and Rotor Riot are in the business of developing, producing and selling drone solutions and technology, with an initial focus on first-person view, or FPV, drone technology. Fat Shark is a market leader in FPV, designing and manufacturing ultra-low latency video goggles for drone pilots. Rotor Riot’s principal business is the operation of a drone-focused e-commerce marketplace, backed by one of the largest communities of FPV drone pilots in the world. Over the next two years, these businesses plan to continue to focus on leveraging and growing their market share in the retail purchase of drone products for use in entertainment, recreational and competitive racing purposes, which we refer to as “consumer” uses, in the drone technology market. We also plan to explore a potential expansion into new sub-markets, which we refer to as “enterprise” uses, such as public safety and drone delivery functions, organically and/or through strategic acquisitions. This is part of our vision to enable people to be part of the robotics revolution.

We were incorporated in Puerto Rico under the name “Red Cat Motor Corporation” on July 11, 2019, before changing our name to “AerocarveUS Corporation” on October 20, 2020 and then to “Unusual Machines, Inc.” on July 5, 2022.

Headquartered in Puerto Rico, we intend to build both organically and through acquisitions in addition to our planned acquisition of Fat Shark and Rotor Riot, targeting companies within the highly fragmented drone industry that have valuable IP, revenue generating customers, and great teams.

The Drone Industry

The drone industry continues to expand beyond its military origin to become a powerful business tool and recreational activity. We expect both of these markets to continue to grow. According to a study by Insider Intelligence, total global drone shipments are estimated to reach 2.4 million in 2023 – increasing at a 66.8% compound annual growth rate or CAGR. Drone growth is expected to occur across all industries: direct to consumer or DTC, which is our current focus, and public safety, and drone delivery, sub-markets we intend to target for expansion in the future. The drone services market is expected to grow to over $60 billion by 2025, from approximately $4.4 billion in 2018. International Data Corporation Markets has projected that the small drone market will increase from 3.8 billion in 2022 to 6.2 billion by 2027, and a CAGR of 10.1% from to 2022 to 2027.The FAA has forecasted a 300% increase in commercial drones from 2019 to 2023 as per businessinsider.com.

We will also pursue potential acquisition targets in the FPV drone technology space that will improve our own hardware and software solutions, rapidly provide the potential to grow our revenues, expand to new industry verticals, and integrate best in class American IP and teams. We cannot assure you we will complete any acquisitions or, if we do, achieve these goals. See “Risk Factors.” We believe that very promising, private companies (such as those we will likely target) are in many instances grossly underfunded and missing out on the ability to go public and bring their innovative products and solutions to a larger set of customers globally. Unlocking this potential will be key to industry consolidation and breaking the dominance of China in the drone industry. We stand at the forefront of this important trend.

Our acquisition strategy will focus on private technology companies that are fundamentally changing the world at an unprecedented pace by making superior new products, establishing new markets, creating new experiences and generating revenue with a significant opportunity for growth. Key technological advances and practices, such as new drone designs, automation, cloud computing, data analytics and intelligence platforms, open-source software development, developer-focused software tools, and software-defined networking, storage and computing, are allowing these companies to rapidly effect change in every major sector of the global economy.

Puerto Rico Advantages

According to the Puerto Rico Department of Economic Development and Commerce (“DEDC”), Puerto Rico has become a magnet for some of the world’s leading aviation and aerospace companies. With a long history of manufacturing experience and a strong cadre of engineering talent, the island has attracted multi-million-dollar investments from these and other major companies in recent years.

Puerto Rico is well positioned to capture much of the research, innovation, engineering, service and production activity related to the drone sector. Beyond industry incentives and federal tax programs, the island also offers the drone industry these benefits:

Planned Acquisition

As described under “The Business Combination,” we plan to acquire Fat Shark and Rotor Riot simultaneously with the closing of this Offering. Because the Company is still its development stage and has limited operations on a pre-transaction basis, the following is an overview of these entities and each of their principal operations, products, development effort and marketing strategies, which will entail the Company’s business focus following the acquisition. While each entity exists independently, their operations have been structured and developed to complement each other and operate largely in tandem, as the below discussions describes in greater detail.

Fat Shark - First Person View Drone Goggles

Fat Shark entered the market in 2007, when founder Greg French began working with camera-fitted aircraft and FPV headsets and decided to design and market his own version of these devices. Fifteen years later, Fat Shark is now a leading provider of drone racing FPV technology. Fat Shark aims to achieve optimal performance by investing time and resources to develop quality products, and consulting top drone pilots for feedback and improvement in its product development and design efforts. The result is a high-quality product offering which has gained significant popularity and brand recognition within the freestyle flight and drone racing culture, including more casual hobbyists and enthusiasts.

Fat Shark and Rotor Riot operate in the drone first-person view, or “FPV,” market of the drone industry. This segment focuses on drones piloted with wearable display devices. These devices are head mounted displays, or “HMDs,” or goggles for drone pilots. These goggles give pilots FPV perspective to control their drone in flight. This is a unique experience where the pilot is interacting with an aircraft through visual immersion. In this augmented reality (AR), the pilot sees only what the drone sees, as if sitting in the pilot seat. This experience is accomplished by live streaming footage from a camera mounted on the nose of the drone directly into specially designed goggles worn by the pilot. The image is transmitted via radio (traditionally analog but increasingly digital) to the pilot. The drone remote control unit, the drone, and the FPV goggles are all interconnected via radio. This effect requires sophisticated electronics that transmit visual information with sufficient speed and reliability to allow pilot control over the drone in real-time. Pilots routinely achieve speeds of over 90 mph in racing and other mission critical applications. Fat Shark’s FPV drone goggles enable the user to operate a drone to be remotely flown for as far as 5-10 miles away.

There are three common categories of FPV flight – freestyle flight, racing, and aerial photography. In freestyle, the pilot navigates around obstacles focused on acrobatics and exploring the environment around the aircraft through the HMD. This type of flight can be used for recreational or commercial photography and videography, public and public safety as well as package delivery. FPV racing describes a growing spectator sport where pilots fly their drones in competitions through a series of obstacles, flags, and gates in a racetrack. Aerial photography is the process of viewing and recording a subject matter from the air from the viewpoint of the pilot.

Rotor Riot – Drone-Focused E-commerce Platform and Digital Marketing

Rotor Riot is an e-commerce business focused on drones and drone-related parts, with a marketing strategy which emphasizes drone culture and the popularity of drone racing and pilots within that culture. Rotor Riot sells drones and starter kits, flight design cameras, video transmitters, and FPV goggles, as well as the mounts, airframes and accessories to build or operate drone aircraft. Rotor Riot in partnership with Fat Shark designs, develops, assembles, and sells each of these FPV components both individually and in packages containing competitor product offerings. These products have gained popularity in FPV racing, and Rotor Riot sponsors multiple drone racing pilots. The Fat Shark and Rotor Riot product portfolios combine for a total of over 400 SKUs, managed at its own state of the art fulfillment center in Orlando, FL. Rotor Riot also purchases and resells drones and components from leading manufacturers, including industry leader DJI, while custom designing and building its own line of branded products and accessories.

Rotor Riot also offers customer support services, repair services and replacement parts for upkeep and maintenance for drone flyers seeking to improve upon their drone system’s hardware. These offerings are focused on capitalizing on the resulting need and enhancing customer experience long-term, in the hopes of achieving and maintaining customer loyalty and recurring revenue streams.

Rotor Riot markets through social media and attracts buyers to its e-commerce platforms through digital advertising aimed towards drone enthusiasts. Rotor Riot maintains a robust presence on Facebook and YouTube, and also sponsors real-world drone competitions and in-person educational experiences. As of February 16, 2023, Rotor Riot’s YouTube account has 260,000 subscribers, and its Facebook page has 42,000 followers. In addition, sports networks, and sponsors such as NBC, Sky, Liberty Media, Fox Sports, MGM, Hearst, and Twitter broadcast and sponsor global events where professional drone pilots and amateurs compete for prizes and sponsorships. Drone racing is a global sport with chapters, leagues, and pilots and established guidelines, rules and regulations for participation adopted by organizations such as MultiGP, Drone Racing League (“DRL”), IUDRO, DR1 Racing, Rotomatch League, FPVR, and Freespace Drone Racing. Pilots specially design their custom-built aircraft, selecting and customizing frames, motors, propellors and controllers for speed and maneuverability from Rotor Riot. Rotor Riot sponsors five of the leading pilots on the competitive FPV racing circuit, including the 2019 and 2018 Drone Racing League champion. Drone pilots and spectators alike experience real-time flight through their own HMD. In addition, Fat Shark sponsored its first drone racing championship in 2015.

Rotor Riot also leverages the popularity of its products among competitive racing pilots by entering into agreements with the pilots to market its products. Under these agreements, each pilot agrees to represent the Rotor Riot brand to the public and periodically provide marketing materials, typically videos, that the Company can publish on its website and social media platforms, in exchange for cash payments. In addition, the Company pays the pilots a percentage of the proceeds from the sales of that pilot’s “signature” products, and of sales generated from the pilot’s online marketing materials.

Products

Set forth below are overviews of our principal product offerings and product development efforts.

Fat Shark FPV Products

Rotor Riot Retail Sales

In addition to marketing Fat Shark’s products, Rotor Riot also resells a variety of drones and drone-related products, including competitor FPV goggles as well as competitor offerings, through its website. Rotor Riot had 95,356 unique visitors to its e-commerce website in October 2022 with 110,782 total sessions. Rotor Riot has 55,520 customers.

Product Warranties

Fat Shark provides a two-year warranty on its products.

Rotor Riot does not provide warranties for the products it sells. Rotor Riot has launched Kwad Care, a program that helps pilots cover damages to their Rotor Riot Built and Tuned Drones. Kwad Care is a monthly paid membership that grants customers that have bought built and tuned drones from Rotor Riot access to free repair labor, discounts on replacement parts, and VIP customer care. Current Rotor Riot customers are charged $19.99 per month which includes labor on repairs and 20% discount on replacement parts.

Suppliers

Rotor Riot purchases its inventory from over 60 suppliers. A majority of the inventory is purchased from the following vendors: T-Motor, ASI, Caddx, and Drone Nerds.

Fat Shark’s primary contract manufacturer is Shenzhen Fat Shark Technology Ltd., referred to elsewhere in this Prospectus as the “Supplier”, which is located in Shenzhen, China and provides product manufacturing services, including raw material procurement, under a requirements agreement with us. The majority owner of this entity is the wife of Fat Shark’s founder. We do not have any written agreements with the Supplier and rely only on purchase orders. See “Related Party Transactions” for more information. Also see the Risk Factor titled “Rising threats of international tariffs, including tariffs applied to goods between the U.S. and China, may materially and adversely affect our business.” on page 26 for more information.

Tariffs

Because we contract with foreign vendors to obtain our inventory, we are subject to tariffs and import/export regulations. In particular, because Fat Shark’s principal manufacturer is located in China, and approximately 68% of Rotor Riot’s inventory is purchased directly from China-based vendors, all of these items are subject to tariffs. Further, because of these tariffs and Rotor Riot’s reliance on Chinese vendors, Rotor Riot has had to raise prices from some of the products it sells. See the Risk Factor titled “Rising threats of international tariffs, including tariffs applied to goods between the U.S. and China, may materially and adversely affect our business.” on page 26 for more information.

Customers

Fat Shark’s sales model is a “B2B2C” model, meaning it sells to retail distributors which in turn sell the products to end users. Rotor Riot is a principal customer of Fat Shark accounting for approximately 4% of Fat Shark’s revenue in its fiscal year ended December 31, 2021. Rotor Riot’s customers are therefore end users of the drones and drone products it sells to drone enthusiasts, hobbyists and competitive racers, which includes the Fat Shark FPV goggles as well as drones and drone components offered by third parties. Fat Shark’s other customers are also competitors of Rotor Riot, as these customers purchase Fat Shark inventory and sell it to drone users. Because their products are presently focused on recreational drone uses, the end users who purchase these products are mainly enthusiasts, hobbyists, competitive droner racers, photographers and videographers.

The culture of FPV flight has and we believe will continue to inspire a new generation of pilots. These are the people and customers who enjoy exploring the world through a new and unique perspective, the people who find solace in the world of flight, and the people who innovate new technologies to enable the culture to thrive. The FPV community has taken the knowledge of 80 years of model aviation to the next level, allowing for a more immersive experience with new and emerging technologies.

Sales and Marketing Strategy

Following the planned acquisition, and assuming we can raise sufficient capital in this Offering or subsequent financings, we will deploy a robust sales and marketing strategy. We intend to sell and market our products in the following ways, in addition to Rotor Riot’s existing marketing and sales channels described above:

In addition, as we strive to grow our operations, we intend to deploy a “land-and-expand” business model in which we plan to establish relationships with new customers and grow those relationships over time by providing high quality products and services. We believe the acquisition of Fat Shark and Rotor Riot, and the product quality and brand recognition they have developed, will be an important component of this strategy.

Growth Strategy

We plan to organically grow by building and selling best in class FPV drone technologies. In parallel, we are investing in the development of products, services and go-to-market strategies that serve a broader set of industries. Lastly, we will take a proactive approach to search for and acquire promising private companies with complementary businesses. Our business strategy includes the following:

Competition

While competition as described below is a concern, we believe that Brandon Torres Declet, our Chief Executive Officer, has a significant background in the drone business which we believe is a competitive advantage. See “Management and Board of Directors.”

Rotor Riot competes with a number of significantly larger, better capitalized companies. SZ DJI Technology Company, Ltd., commonly known as DJI, is a leader in the consumer drone segment with a global market share estimated at more than 70%, according to industry research firms. In addition to competing with DJI, Rotor Riot purchases and sells DJI products on its website. Other Rotor Riot competitors include GetFPV, Race Day Quads, PyroDrone, Parrot, and Lumenier. Race Day Quads is a larger, direct competitor in the FPV sector. We will compete against these companies by leveraging our visibility on the Internet through Rotor Riot’s Facebook page which as of February 22, 2023 has more than 41,000 members and our Rotor Riot YouTube channel which as of February 22, 2023 has more than 260,000 subscribers. The Rotor Riot brand has been at the center of the racing and freestyle culture of drones since 2015. Rotor Riot sponsors five leading FPV pilots on the competitive racing circuit, including the Drone Racing League champion pilot in 2018 and 2019.

Fat Shark competes against DJI which is the dominant market leader in the consumer segment. Fat Shark also competes with other FPV headset companies that include Skyzone, Orqa, and HD Zero. The Fat Shark brand has been synonymous with FPV headsets to many industry participants since the emergence of the market in 2008. Fat Shark continues to compete through partnerships with other FPV companies and a focus on superior design, manufacturing and product quality.

There has also been a proliferation of startups in the drone industry, driving fragmentation and lowering prices. We believe that this fragmentation does little to address the needs of users of drones or our future customers. We expect that as the industry grows, customers will ultimately rely on companies and platforms that consolidate solutions to unify the key categories of the drone industry. As part of our acquisition strategy, the Company is engaging companies with industry-leading technology and intellectual property, or customers that can be brought together under our brand. We believe that this consolidation strategy will enable us to grow faster in the developing drone industry.

We expect competition in the drone industry, which is already intense, to increase as other companies enter the drone market, as customers’ requirements evolve, and as new products and technologies are introduced. Several of our competitors have greater name recognition, much longer operating histories, greater financial resources, more and better-established customer relationships, larger sales forces and significantly greater resources. As a result, they may be able to respond more quickly to new or emerging technologies and changes in customer requirements or devote greater resources to the development, promotion and sale of their products than us, hampering our ability to successfully compete with respect to certain of these factors. Increased competition may lead to price cuts or the introduction of products available for free or a nominal price, fewer customer orders, reduced gross margins, longer sales cycles and loss of market share. We may not be able to compete successfully against current and future competitors, and our business, results of operations and financial condition maybe harmed if we fail to meet these competitive pressures.

Government Regulation of Drones

In the U.S., the FAA is responsible for the regulation and oversight of civil aviation within the U.S. Its primary mission is to ensure the safety of civil aviation. The FAA has adopted the name “unmanned aircraft” to describe aircraft systems without a flight crew on board. More common names include: drone, UAS, UAV, and remotely operated aircraft.

The FAA began issuing regulations governing drones in 2005 with their scope and frequency expanding in recent years with the significant increase in the number of drones sold. In December 2015, the FAA’s UAS Registration Task Force, of which our CEO and Chairman Brandon Torres Declet was a member, announced that all drones weighing more than 250 grams, or 0.55 pounds, must be registered with the FAA. As of July 2022, the FAA reported the registration of 858,550 drones, of which 318,455 were commercial and 536,482 were recreational. In addition, more than 286,184 remote pilots were certified.

In December 2015, the FAA enacted the primary regulation governing the use of drones, 14 CFR Part 107 (“Part 107”), which governs the use of drones weighing less than 55 pounds, on takeoff, including everything that is on board or otherwise attached to the drone. Key provisions of Part 107 include the following: (1) the drone must remain within either the visual line of sight (“VLOS”) of the remote pilot in command and the person manipulating the flight controls or the VLOS of a visual observer; (2) the drone must at all times remain close enough to the remote pilot and person manipulating the flight controls for these people to see it with unaided vision; (3) drones may only operate in daylight or civil twilight (30 minutes before official sunrise to 30 minutes after official sunset); (4) drones may not exceed a maximum groundspeed of 100 mph; (5) drones may not exceed a maximum altitude of 400 feet above ground level, or if they exceed this altitude, must remain within 400 feet of a structure; (6) drones cannot operate in Class B, C, D, and E airspace without permission; (7) the pilot in command must conduct a pre-flight inspection; (8) to operate a drone, the pilot must either hold a remote pilot airman certificate or be under the direct supervision of someone with such a certificate; (9) drone operators must register their drones with the FAA.

In January 2021, the FAA finalized rules requiring that drones be identifiable remotely. These rules became effective for drone manufacturers in September 2022 and for will be effective for drone pilots in September 2023. The FAA believes that remote ID technologies will enhance safety and security by allowing the FAA, law enforcement, and federal security agencies to identify drones flying in their jurisdiction. These efforts lay the foundation for more complex operations, such as those beyond visual line of sight at low altitudes, as the FAA and the drone industry move toward a traffic management ecosystem for Unmanned Aircraft System flights separate from, but complimentary to, the air traffic management system.

On March 10, 2022, the FAA’s Unmanned Aircraft Systems Beyond Visual Line of Sight Aviation Rulemaking Committee (“ARC”), of which our CEO and Chairman Brandon Torres Declet was a member, issued its final report to the FAA. In terms of key recommendations, the ARC recommends that the FAA set an acceptable level of risk (“ALR”) for UAS that is consistent across all types of operations being performed. The ARC envisions that this approach will allow the FAA to adopt a common and consistent set of regulations and guidance, giving operators the flexibility to meet the ALR through qualitative or quantitative methods, or a hybrid approach. Next, the ARC recommends a series of modifications to the right of way rules in Low Altitude Shielded Areas (within 100’ of a structure or critical infrastructure as defined in 42 U.S.C. § 5195(c)(2) and in Low Altitude Non-Shielded Areas (below 400’) to accommodate unmanned aircraft (“UA”) operations.

We cannot assure you that any final legislation or rules enacted in furtherance of the FAA’s or other regulatory bodies’ announced proposals will result in the expanded use of our products, or that they will not limit or restrict their use or our market share.

The Company believes that the oversight of the FAA is beneficial to the drone industry generally, and the Company specifically. Approximately 10% of the drones sold by Rotor Riot are below the weight threshold required to register. The remaining 90% have more functionality, are more likely to be used for commercial purposes, and therefore, should be registered. Because Fat Shark only develops and produces FPV goggles and associated components, FAA regulations do not currently govern the sale, registration or operation of Fat Shark products.

Environmental Considerations

Compliance with applicable environmental laws since inception has not had a material effect upon our capital expenditures, earnings or competitive position. However, drones are battery operated which use electricity for charging. To that extent, except for users who use solar and other non-electrical power to charge drones, users of drones we sell burn carbon which negatively affects the environment. Further, the SEC’s climate change rules, when passed will likely increase our compliance costs.

Research and Development

Research and development activities are part of Fat Shark’s business, and we will follow a disciplined approach to investing our resources to create new drone technologies and solutions. In the years ending April 30, 2022 and 2021, Fat Shark’s research and development costs were approximately 15.5% and 5.7%, respectively, of its revenues. A fundamental part of this approach is a well-defined screening process that helps us identify commercial opportunities that support desired technological capabilities in the markets we serve. Our research will include the enhancement of our goggle products for consumers that enjoy FPV flight and to enterprise customers whose problems could be solved via FPV flight.

Employees and Human Capital Resources

As of March 7, 2023, we had three full-time employees. We believe that we maintain good relations with our employees. However, with our acquisition of Fat Shark and Rotor Riot, we expect to add 11 employees and one consultant. We currently have one consultant who we pay $10,000 a month. Upon the consummation of the Business Combination, we intend to continue Fat Shark’s relationship with Greg French and will pay Mr. French an annual consulting fee of $150,000 or $12,500 per month. We intend to evaluate how we attract and retain the best talent in the industry and create a world class culture. Since our business is new and evolving, we have not evaluated these factors historically.

Legal Proceedings

From time-to-time, we may become involved in various legal proceedings that arise in the ordinary course of business or otherwise. Legal proceedings are subject to inherent uncertainties as to timing, outcomes, costs, expenses and time expenditures by our management and others on our behalf. We are currently not a party to any litigation and have been advised Fat Shark and Rotor Riot are not included in any litigation.

Facilities

Our principal executive offices are located at 151 Calle De San Francisco Ste. 200 PMB 2106 San Juan, Puerto Rico 00901-1607. Rotor Riot also has a three-year lease for a 3,700 sq. foot facility in Orlando, FL. As the Company expands, we will seek to expand our facilities to support engineers, technical and support staff we intend to hire. There is a large pool of available properties in Florida and Puerto Rico. Specifically, we will also be looking for additional warehouse and office space in South Florida with immediate access to airports and multi-modal logistics (air, sea, land) for more rapid shipping of FPV products.

Intellectual Property

Our commercial success will depend substantially on the ability to obtain patents and other intellectual property rights and maintain adequate legal protection for products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets.

We recently filed for a trademark on our logo. We expect to acquire from Red Cat the following patents and trademarks related to the Fat Shark and Rotor Riot brands and products following the acquisition of those entities:

The following table summarizes currently issued patents (indicated by “Issued”) including the grant dates thereof, and patent applications (indicated by “Pending or Published”), currently held and/or used by Red Cat and its subsidiaries in connection with Fat Shark’s and Rotor Riot’s operations. As the chart indicates, some of these patents are in the U.S., where when issued the patent protection generally applies for 20 years from the date the patent application was made (subject to potential extension, if applied for and granted). In general, patent protection provides the patent holder with a monopoly on the invention within its scope for the duration of the patent.

Trademark Portfolio

The following table summarizes current registered trademarks (indicated by “Registered”) including the registration dates, held and/or used by Red Cat and its subsidiaries in connection with Fat Shark’s and Rotor Riot’s operations. As the chart indicates, these trademarks are registered in the U.S. and abroad.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis of financial condition and results of operations should be read together with our financial statements and accompanying notes, and our appearing elsewhere in this Prospectus. This Management’s Discussion and Analysis contains forward-looking statements that involve risks and uncertainties. Please see “Forward-Looking Statements” set forth in the beginning of this Prospectus and see “Risk Factors” beginning on page 8 for a discussion of certain risk factors applicable to our business, financial condition, and results of operations. Operating results are not necessarily indicative of results that may occur in future periods. Please note that because we and Red Cat have different fiscal years, the period-to-period results are not comparable.

.

Overview

We are a Puerto Rico corporation organized in 2019. We are engaged in the commercial drone industry but to date have not generated any material revenues. Our current primary business objective is to consummate the Business Combination which we believe will accelerate our role in this industry. See “The Business Combination”.

Simultaneous with the closing of this Offering, we will acquire Fat Shark and Rotor Riot from Red Cat with a goal of becoming a first-person view, or “FPV,” technology market leader. Fat Shark is a leader in FPV, designing and manufacturing ultra-low latency video goggles for drone pilots. Rotor Riot is an e-commerce marketplace, backed by the largest community of FPV drone pilots in the world. Over the next two years, our goal is to materially grow these businesses, while expanding into new enterprise verticals like public safety and drone delivery. This is part of our vision to enable people to be part of the robotics revolution. Red Cat acquired Rotor Riot in January 2020 and Fat Shark in November 2020.

The following management discussion and analysis includes the results of operations, cash flow activities and liquidity and capital resources for each Unusual Machines, Fat Shark and Rotor Riot and are marked accordingly below.

Unusual Machines Results of Operations

Years Ended December 31, 2022 and 2021

Revenue

During the year ended December 31, 2022, we did not generate any revenues compared to $4,989 revenues during the year ended December 31, 2021 representing a decrease of $4,989 or 100%. Revenues from 2021 related to limited sales to Rotor Riot which did not occur in 2022.

Operating Expenses

During the year ended December 31, 2022, we incurred research and development expenses totaling $91,325 compared to $0 for the year ended December 31, 2021 resulting in an increase of $91,325 or 100%. The increase relates to professional fees for product design work that was subsequently placed on hold given the proposed business combinations of Fat Shark and Rotor Riot.

During the year ended December 31, 2022, we incurred general and administrative expenses totaling $1,150,522 compared to $166,868 for the year ended December 31, 2021, resulting in an increase of $983,654 or 589.5%. The increase primarily relates to Unusual Machines building out its operations. This includes hiring an executive team, legal expenses related to the business combination, and professional fees for preparation of becoming a public company.

Net Loss

Net loss for the year ended December 31, 2022, totaled $1,242,584 compared to $161,876 for the year ended December 31, 2021, resulting in an increase of $1,080,708. The increase in net loss is almost entirely related to the increase in general and administrative expenses and research and development expenses as we start to build out our operations for the business combination and becoming a public company.

Fat Shark Results of Operations

Six Months Ended October 31, 2022 and 2021

Revenue

During the six months ended October 31, 2022 (or the “2022 period”), Fat Shark generated revenues totaling $1,983,871 compared to $1,894,496 revenues during the six months ended October 31, 2021 (or the “2021 period) representing an increase of $89,375 or 4.5%. Revenues can fluctuate from period to period and the modest difference between periods was not related to any specific reason but generally reflective of normal changes as the life cycles of our products mature. During the 2022 period, the Company launched its newest product, the Dominator while revenues during the 2021 period reflected the discounted sales of products at the end of their life cycle.

Cost of Goods Sold

During the six months ended October 31, 2022, Fat Shark incurred cost of goods sold of $1,727,121 compared to $1,887,766 during the six months ended October 31, 2021 resulting in a decrease of $160,645 or 9.3%. The entire decrease related to higher relative material costs during the 2021 period as the Company lowered prices to promote sales of products near the end of their life cycle. The lower sales prices required more materials in order to generate a relatively comparable level of sales.

Gross Margin

During the six months ended October 31, 2022, Fat Shark gross margin was $256,750 compared to $6,730 during the six months ended October 31, 2021, resulting in an increase of $250,020 or 97.4%. Fat Shark gross margin, as a percentage of sales, totaled 12.9% during the six months ended October 31, 2022 compared to 0.4% during the six months ended October 31, 2021. During the first quarter of the 2022 period, Fat Shark launched its newest product, the Dominator, which generated higher gross margins compared to the 2021 period when the promotional, discounted sales of outdated products resulted in significantly lower gross margins.

Operating Expenses

During the six months ended October 31, 2022, Fat Shark incurred operations expense totaling $135,030, compared to $141,834 during the six months ended October 31, 2021, resulting in a decrease of $6,804 or 5.0%. The decrease during the 2022 period reflects lower professional fees compared to the 2021 period, partially offset by higher payroll expense compared to the 2021 period.

During the six months ended October 31, 2022, Fat Shark incurred research and development expenses totaling $143,469 compared to $215,555 for the six months ended October 31, 2021 resulting in a decrease of $72,086 or 50.2%. The decrease primarily relates to the release of the new Dominator googles, which resulted in a lower need of research and development expenses during the 2022 period.

During the six months ended October 31, 2022, Fat Shark sales and marketing expenses totaled $9,726 compared to $31,853 for the six months ended October 31, 2021, resulting in a decrease of $22,127 or 227.5%. The decrease primarily relates to certain personnel working during the 2021 period who were not employed during the 2022 period.

During the six months ended October 31, 2022, Fat Shark incurred general and administrative expenses totaling $60,893 compared to $100,149 for the six months ended October 31, 2021, resulting in a decrease of $39,256 or 64.5%. The decrease primarily relates entirely to lower payroll and business travel costs compared to the 2021 period.

Net Loss

Fat Shark net loss for the six months ended October 31, 2022, totaled $139,728 compared to $530,782 for the six months ended October 31, 2021 resulting in a decrease of $391,054 or 279.9%. The decrease in Fat Shark net loss is primarily related to the increase in overall gross margin from the launch of the Dominator google combined with pricing discounts from the prior year. In addition, Fat Shark incurred less research and development expense due to the release of its new product.

Fat Shark Results of Operations

Years Ended April 30, 2022 and 2021

Revenue

During the year ended April 30, 2022 (or the “2022 period”), Fat Shark generated revenues totaling $2,627,792 compared to $2,887,475 during the year ended April 30, 2021 (or the “2021 period), representing a decrease of $259,683 or 9.0%. Revenues can fluctuate from period to period and are generally reflective of normal changes as the life cycles of our products mature. During the 2022 period, the Company’s key products were in a later stage of their maturation which resulted in lower sales compared to the 2021 period.

Cost of Goods Sold

During the year ended April 30, 2022, Fat Shark incurred cost of goods sold of $2,569,307 compared to $2,361,342 during the year ended April 30, 2021 resulting in an increase of $207,965 or 8.8%. The increase relates to higher costs of products being sold including increases in material costs due to the global supply chain issues, and an increase in products sold during the year ended April 30, 2022.

Gross Margin

During the year ended April 30, 2022, Fat Shark gross margin was $58,485 compared to $526,133 during the year ended April 30, 2021, resulting in a decrease of $467,648 or 88.9%. Fat Shark’s gross margin, as a percentage of sales, totaled 2.2% during the year ended April 30, 2022 compared to 18.2% during the year ended April 30, 2021. The lower level of gross margin primarily related to Fat Shark providing pricing discounts associated with the sales of products at the end of their life cycle in anticipation of the release of its new product, the Dominator.

Operating Expenses

During the year ended April 30, 2022, Fat Shark’s operations expenses totaled $252,545 compared to $208,990 during the year ended April 30, 2021, resulting in an increase of $43,555 or 20.8%. The increase during the 2022 period reflects higher professional services fees compared to the 2021 period.

During the year ended April 30, 2022, Fat Shark incurred research and development expenses totaling $407,881 compared to $165,427 for the year ended April 30, 2021 resulting in an increase of $242,454 or 146.6%. The increase primarily relates to an increase in payroll and material costs for Fat Shark related to its next generation product release.

During the year ended April 30, 2022, Fat Shark’s sales and marketing expenses totaled $60,616 compared to $27,110 for the year ended April 30, 2021, resulting in an increase of $33,506 or 123.6%. Sales and marketing expenses were higher during the 2022 period as the Company was preparing for the launch of the Dominator compared to the 2021 period when the Company’s then existing key products had been previously launched and did not require extensive sales and marketing efforts.

During the year ended April 30, 2022, Fat Shark incurred general and administrative expenses totaling $169,096 compared to $121,053 for the year ended April 30, 2021, resulting in an increase of $48,043 or

39.7%. The increase primarily relates to higher payroll and business travel costs which increased by $21,147 and 14,552, respectively, compared to the 2021 period.

Net Loss

Fat Shark’s net loss for the year ended April 30, 2022, totaled $910,723 compared to $27,890 for the year ended April 30, 2021 resulting in an increase of $882,833. The increase in Fat Shark’s net loss is primarily related to lower gross margin for Fat Shark related to pricing discounts on end-of-life cycle products and higher research and development expenses related to the release of the new generation product, the Dominator.

Rotor Riot Results of Operations

Six Months Ended October 31, 2022 and 2021

Revenue

During the six months ended October 31, 2022 (or the “2022 period”), Rotor Riot generated revenues totaling $

1,624,947 compared to $914,460 during the six months ended October 31, 2021 (or the “2021 period”), representing an increase of $710,487 or 77.7%. The increase in revenues primarily related to the Company’s newly launched strategic initiatives, primarily focused on increased digital marketing efforts results in a strong increase in sales compared to the 2021 period.

Cost of Goods Sold

During the six months ended October 31, 2022, Rotor Riot incurred cost of goods sold of $1,394,051 compared to $781,797 during the six months ended October 31, 2021 resulting in an increase of $612,254 or 78.3%. The increase relates to higher revenue as revenue increased by a consistent 77.7% during the same period.

Gross Margin

During the six months ended October 31, 2022, Rotor Riot’s gross margin was $230,896 compared to $132,663 during the six months ended October 31, 2021, resulting in an increase of $98,233 or 74.0%. Gross margin, as a percentage of sales, totaled 14.2% during the six months ended October 31, 2022 compared to 14.5% during the six months ended October 31, 2021. Gross margin as a percentage of sales remained relatively consistent over the same period.

Operating Expenses

During the six months ended October 31, 2022, Rotor Riot incurred operations expenses totaling $197,808 compared to $148,203 during the six months ended October 31, 2021, resulting in an increase of $49,605 or 33.5%. The increase primarily relates to increased office and facilities expenses as well as meals, training, and travel.

During the six months ended October 31, 2022, Rotor Riot incurred research and development expenses totaling $27,295 compared to $23,849 for the six months ended October 31, 2021 resulting in an increase of $3,446 or 14.4%. The increase primarily relates to increased payroll costs.

During the six months ended October 31, 2022, Rotor Riot’s sales and marketing expenses totaled $353,565 compared to $113,577 for the six months ended October 31, 2021, resulting in an increase of $239,988 or 211.3%. Sales and marketing expenses were significantly higher in the 2022 period as the Company launched new strategic initiatives, including an increase in the scope and breadth of its digital advertising programs. These initiatives resulted in significant increases in payroll, advertising, and video production costs.

During the six months ended October 31, 2022, Rotor Riot incurred general and administrative expenses totaling $98,591 compared to $99,150 for the six months ended October 31, 2021, resulting in a decrease of $559 or 0.6%.

Net Loss

Rotor Riot’s net loss for the six months ended October 31, 2022, totaled $535,419 compared to $324,536 for the six months ended October 31, 2021 resulting in an increase of $210,883 or 65.0%. The increase in net loss is primarily related to increased sales and marketing expenses during the 2022 period. In the 2022 period, the Company launched new strategic initiatives, including an increase in the scope and breadth of its digital advertising programs. These initiatives resulted in significant increases in payroll, advertising, and video production costs.

Rotor Riot Results of Operations

Year Ended April 30, 2022 and 2021

Revenue

During the year ended April 30, 2022 (or the “2022 period”), Rotor Riot generated revenues totaling $2,028,149 compared to $2,194,503 during the year ended April 30, 2021 (or the “2021 period”), representing a decrease of $166,354 or 7.6%. Revenues can fluctuate from period to period and are generally reflective of normal changes through the life cycles of the products that we sell.

Cost of Goods Sold

During

the year ended April 30, 2022, Rotor Riot incurred cost of goods sold of $1,587,647 compared to $1,638,070 during the year ended April 30, 2021 resulting in a decrease of $50,396 or 3.1%. The decrease related to lower revenues during the 2022 period.

Gross Margin

During the year ended April 30, 2022, Rotor Riot’s gross margin was $440,475 compared to $556,433 during the year ended April 30, 2021, resulting in a decrease of $115,958 or 20.8%. Gross margin, as a percentage of sales, totaled 21.7% during the year ended April 30, 2022 compared to 25.4% during the year ended April 30, 2021. The lower level of gross margin primarily related to higher costs of products being sold including increases in material costs due to the global supply chain issues.

Operating Expenses

During the year ended April 30, 2022, Rotor Riot incurred operations expense totaling $372,473 compared to $374,556 during the year ended April 30, 2021, resulting in a decrease of $2,083 or 0.6%.

During the year ended April 30, 2022, Rotor Riot incurred research and development expenses totaling $58,719 compared to $28,368 for the year ended April 30, 2021, resulting in an increase of $30,351 or 107.0%. The increase primarily relates to increased payroll costs.

During the year ended April 30, 2022, Rotor Riot incurred sales and marketing expenses totaling $220,007 compared to $81,449 for the year ended April 30, 2021, resulting in an increase of $138,558 or 170.1%. The increase primarily relates to an increase in payroll and advertising program costs for Rotor Riot.

During the year ended April 30, 2022, Rotor Riot incurred general and administrative expenses totaling $220,366 compared to $121,342 for the year ended April 30, 2021, resulting in an increase of $99,024 or 81.6%. The increase primarily related to increased information technology costs associated with the implementation of more sophisticated software systems. Additionally, office, meals, travel, and training expenses also increased.

Net Loss

Rotor Riot’s net loss for the year ended April 30, 2022, totaled $596,878 compared to $69,609 for the year ended April 30, 2021 resulting in an increase of $527,269. The increase in net loss is primarily related to increased stock compensation, general and administrative, and sales and marketing expenses.  

Liquidity and Capital Resources

Unusual Machines Cash Flows

Year Ended December 31, 2022 and 2021

Operating Activities

Net cash used in operating activities was $1,231,794 during the year ended December 31, 2022 compared to net cash used in operating activities of $162,821 during the year ended December 31, 2021, representing an increase of $1,068,973 or 656%. This increase in net cash used primarily resulted from our increase in net loss of $1,242,584 offset by non-cash expenses of $885 and changes in working capital of $9,905.

Financing Activities

Net cash provided by financing activities totaled $549,900 during the year ended December 31, 2022 compared to $3,948,065 during the year ended December 31, 2022, resulting in a decrease in net cash provided by financing activities of $3,398,165 or 86.1%. The decrease is entirely related to proceeds received from exempt private offerings of our common stock.

Fat Shark Cash Flows

Six Months Ended October 31, 2022 and 2021

Operating Activities

Fat Shark net cash used in operating activities was $3,053,300 during the six months ended October 31, 2022 compared to net cash used in operating activities of $240,444 during the six months ended October 31, 2021 representing an increase of $2,830,472. This increase in net cash used primarily resulted from Fat Shark’s increase in other assets, most of which is prepaid inventory of $2,146,775, increase in inventory of $670,560, increase in accounts receivable of $514,044, and net loss of $139,728. This was offset by non-cash expenses of $47,483 and changes in other working capital of $370,355.

Financing Activities

Fat Shark net cash provided by financing activities totaled $3,007,298 during the six months ended October 31, 2022 compared to $517,128 during the six months ended October 31, 2021, resulting in an increase of net cash provided by financing activities of $2,490,170. Cash provided by financing activities during the six months ended October 31, 2022 consisted of $3,007,298 of proceeds from a related party as compared to 2,137,928 of proceeds from a related party during the six months ended October 31, 2021. In addition, Fat Shark made payments of $1,620,800 related to debt obligations during the six months ended October 31, 2021. These debt obligations have been fully repaid and no payments were made during the six months ended October 31, 2022.

Fat Shark Cash Flows

Year Ended December 31, 2022 and 2021

Operating Activities

Fat Shark net cash used in operating activities was $783,810 during the year ended April 30, 2022 compared to net cash used in operating activities of $156,189 during the year ended April 30, 2021 representing an increase of $643,227 or 411.8%. This increase in net cash used primarily resulted from Fat Shark’s increase in net loss of $882,833 offset by non-cash expenses of $29,867 and changes in working capital of $209,739.

Financing Activities

Fat Shark net cash provided by financing activities totaled $848,195 during the year ended April 30, 2022 compared to $201,027 during the year ended April 30, 2021. The cash provided by financing activities in 2022 consisted of $2,468,995 of proceeds from a related party offset by $1,620,800 payments on debt obligations. The cash provided by financing activities in 2021 consisted of $201,027 of cash acquired through Red Cat’s acquisition of Fat Shark.

Rotor Riot Cash Flows

Six Months Ended October 31, 2022 and 2021

Operating Activities

Rotor Riot net cash used in operating activities was $953,367 during the six months ended October 31, 2022 compared to net cash used in operating activities of $480,015 during the six months ended October 31, 2021 representing an increase of $501,595 or 104.5%. This increase in net cash used primarily resulted from Rotor Riot’s increase in net loss of $210,883 and changes in working capital of $290,712.

Financing Activities

Rotor Riot net cash provided by financing activities totaled $960,915 during the six months ended October 31, 2022 compared to $415,834 during the six months ended October 31, 2021. The cash provided by financing activities during the six months ended October 31, 2022 consisted of $960,915 of proceeds from a related party. Cash provided by financing activities during the six months ended October 31, 2021 consisted of $607,157 of proceeds from a related party offset by $191,323 from payments related to debt obligations. These debt obligations have been fully repaid and no payments were made during the six months ended October 31, 2022.

Rotor Riot Cash Flows

Year Ended December 31, 2022 and 2021

Operating Activities

Rotor Riot net cash used in operating activities was $678,206 during the year ended April 30, 2022 compared to net cash used in operating activities of $433,294 during the year ended April 30, 2021 representing an increase of $405,999 or 93.7%. This increase in net cash used primarily resulted from Rotor Riot’s increase in net loss of $527,269 offset by changes in working capital of $121,270.

Financing Activities

Rotor Riot net cash provided by financing activities totaled $591,339 during the year ended April 30, 2022 compared to $488,723 during the year ended April 30, 2021. The cash provided by financing activities in 2022 consisted of $860,384 of proceeds from a related party offset by payments on debt obligations of $269,045. Cash provided by financing activities in 2021 consisted of proceeds of $338,449 and proceeds of $150,274 from debt obligations.

Unusual Machines Liquidity and Capital Resources

As of December 31, 2022, we had current assets totaling $3,326,622 primarily consisting of cash balances of $3,099,422. Our current liabilities as of December 31, 2022 totaled $120,938, consisting entirely of accounts payable and accrued expenses. Our net working capital as of December 31, 2022 was $3,205,684. Our cash balance as of March 3, 2023 was approximately $2,600,000.

To date, our operations and business development have been funded exclusively by exempt private offerings of our common stock. In the Fall of 2021, we closed a private offering of 4,552,000 shares of common stock at a price of $0.50 per share for total proceeds of $2,276,000. On December 31, 2021, we closed an additional private offering of 482,500 shares of common stock at a price of $4.00 per share for total gross proceeds of $1,930,000, of which we received net proceeds of $1,842,000 after fees and other expenses. On July 25, 2022, we closed an additional private offering of 150,000 shares of common stock at a price of $4.00 per share for total proceeds of $600,000. While we have sufficient cash resources to support our operations for the next 12 months, we cannot complete the acquisition of Fat Shark and Rotor Riot unless we close this Offering. Assuming we do acquire Fat Shark and Rotor Riot, we expect we will have sufficient working capital to support our operations for at least 12 months following the closing of this Offering.

Going Concern

The reports from the independent registered public accounting firm for the fiscal year ended April 30, 2022 for Fat Shark Holdings Ltd. and for the fiscal year ended April 30, 2022 for Rotor Riot, LLC, includes an explanatory paragraph stating each company has recurring net losses from operations, negative operating cash flows, does not yet generate revenue from operations and will need additional working capital for ongoing operations. These factors, among others, raise substantial doubt about each company's ability to continue as a going concern. If Fat Shark and Rotor Riot obtain sufficient funding, including advances from us with the proceeds of this Offering, we expect each will no longer operate as a going concern. With the closing of this Offering, we will not be a going concern, however, we note our continuing losses in the going concern risk factor on page 8.

Critical Accounting Policies and Estimates

Our financial statements and accompanying notes have been prepared in accordance with GAAP applied on a consistent basis. The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods.

We regularly evaluate the accounting policies and estimates that we use to prepare our financial statements. A complete summary of these policies is included in the notes to our financial statements. In general, management’s estimates are based on historical experience, on information from third party professionals, and on various other assumptions that are believed to be reasonable under the facts and circumstances. Actual results could differ from those estimates made by management. 

Property and equipment are stated at cost. Depreciation and amortization are computed using straight-line methods over the estimated useful lives of the related assets. When property and equipment is retired or otherwise disposed of, the related cost and accumulated depreciation are removed from the respective accounts, and any resulting gain or loss on disposition is reflected in operations. Repairs and maintenance are expensed as incurred; expenditures for additions, improvements and replacements are capitalized. The various classes of fixed assets are depreciated over their estimated useful lives as follows:

Computer equipment – 3 years

Goodwill represents the excess of the purchase price of an acquisition over the estimated fair value of identifiable net assets acquired. The measurement periods for the valuation of assets acquired and liabilities assumed ends as soon as information on the facts and circumstances that existed as of the acquisition date becomes known, not to exceed 12 months. Adjustments in a purchase price allocation may require a change in the amounts allocated to goodwill during the periods in which the adjustments are determined. 

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

Recently Issued Accounting Pronouncements

The Company has implemented all new accounting pronouncements that are in effect. These pronouncements did not have any material impact on the financial statements unless otherwise disclosed, and the Company does not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on its financial position or results of operations.

MANAGEMENT AND BOARD OF DIRECTORS

Board of Directors, Executive Officers and Significant Employees

Set forth below are our executive officers and members of our Board of Directors (the “Board”).

Our directors hold office until the next annual meeting of shareholders of the Company and until their successors have been elected and qualified. Our officers are elected by and serve at the discretion of the Board.

Biographies

Brandon Torres Declet, Chief Executive Officer, and Chairman of the Board of the Directors

Brandon Torres Declet has served as the Chief Executive Officer and Chairman of the Board of the Company since April 2022. Prior to that, he provided strategic and fiduciary leadership at AgEagle Aerial Systems, Inc. (NYSE: UAVS), a leading commercial drone company, as Chief Executive Officer and Director from May 2021 to January 2022, and as Chief Operating Officer from April 2021 to May 2021. Previously, he founded Measure UAS, Inc. (“Measure”) in May 2014 and served as its Chief Executive Officer from its founding until November 2019, where he built and grew this aerial intelligence company to the top 5% of drone firms by revenue – subsequently selling the Measure drone services business to the Aerodyne Group in November 2019, where he served as Chairman of Aerodyne Measure until April 2021. After his first successful exit, he founded and developed a drone SaaS platform Ground Control at Measure Global, Inc., which provides drone mission planning, data collection, processing, analysis, and intelligence reporting, he had his second successful exit selling that SaaS business to AgEagle for combination of cash and stock valued at $45 million less certain adjustments in April 2021.

Mr. Declet and his team at Measure earned a Technology and Engineering Emmy™ Award for technical work in drone cinematography and was recognized with the Frost & Sullivan Award for Growth Excellence. In public service, he was appointed Senior Advisor to Oxford University’s Centre for Technology and Global Affairs and by the U.S. Secretary of Transportation to the FAA’s Advanced Aviation Advisory Committee (AAAC). He has also served as Counsel to U.S. House of Representatives; Homeland Security Committee; Counsel on Capitol Hill to Senator Feinstein, Congresswoman Harman, and Counsel to the Senate Intelligence and Judiciary Committees.

As a global Chief Executive Officer, Chief Operating Officer, and Board Director with extensive operational experience, he has built, led, and advised public and private companies during complex business evolutions and exits through challenging turnarounds, disruptive transformations, scaling, and strategic pivots. Recognized and trusted by the Fortune 500 as a leading Latino and Puerto Rican drone industry entrepreneur and policy expert, he has 20+ years’ experience intersecting top government agencies and corporate industry in highly regulated markets and has firsthand experience successfully navigating regulatory challenges.

A drone industry thought leader, Mr. Declet has been featured on CNN, CNBC, Fox News, and Commercial UAV News among others. In 2018 and 2019, he was named a Tech Titan by Washingtonian Magazine.

Mr. Declet’s management and public company experience, his experience in the drone business and his role as President and Chief Executive Officer of the Company, led to his appointment as a director.

Matthew Newman, President

Mr. Newman has served as the Company’s President since September 2020. From January 2014 to September 2019, he served as a Director of Sales at SRC Solutions Inc., a 5G test solutions company.

Brian Hoff, Chief Financial Officer

Mr. Hoff has served as the Company’s Chief Financial Officer since November 2022. Prior to that, he served as the Chief Financial Officer of Auddia, Inc. (Nasdaq: AUUD), a technology company focused on audio media, from April 2021 to October 2022. He served as Vice President and Controller at STACK Infrastructure, a digital infrastructure company, from October 2019 to April 2021, and as Controller at Coalfire, a cybersecurity company, from November 2011 until October 2019.

Robert Lowry, Director

Mr. Lowry has served as a director of the Company since August 2022. Mr. Lowry has been the owner of Sebring Assisted Living Facility since 1998, and the owner of Homestead Assisted Living Facility since 2007. Mr. Lowry’s experience as a business entrepreneur and his experience in operational finance led to his appointment as a director.

Thomas Walker, Director

Mr. Walker has served as a director of the Company since November 2022. He has served as Chief Executive Officer of DroneUp LLC, a drone services and logistics company since November 2016. Mr. Walker’s experience as an entrepreneur and Chief Executive Officer of a drone company led to his appointment as a director.

Jeffrey Thompson, Director

Mr. Thompson has served as a director of the Company since inception in 2019. He served as the Company’s principal executive officer from inception until April 2022. Mr. Thompson has been President and Chief Executive Officer of Red Cat since May 15, 2019. Mr. Thompson was a director of Panacea Life Sciences Holdings, Inc. (OTCQB:PLSH), a producer and marketer of products made from industrial hemp (CBD), from January 2019 until April 2020. Mr. Thompson’s management and public company experience, his experience in the drone business and his role as President and Chief Executive Officer of Red Cat, led to his appointment as a director.

Cristina A. Colón, Director

Ms. Colón has a served as a director of the Company since August 2022. Ms. Colón has been the owner of Cinmarc & Associates LLC, a public housing consulting firm, since 2018 and has served as its President since August 2021. Ms. Colón has also been the owner/operator Café de La Plaza, a restaurant located in Palmas del Mar, Puerto Rico, since 2009. From 2019 to 2021, Ms. Colón served as an investor relations specialist at OptimizeRX, a medical technology company. Ms. Colón’s experience as an entrepreneur and her marketing and investor relations experience led to her appointment as a director.

Composition of our Board of Directors

Our Board of Directors currently consists of five members. Our directors hold office until their successors have been elected and qualified or until the earlier of their death, resignation or removal. There are no family relationships among any of our directors or executive officers.

Director Independence

Our Board has determined that all of our present directors are independent, in accordance with standards under the Nasdaq Listing Rules, other than Mr. Declet and Mr. Thompson. Our Board determined that, under the Nasdaq Listing Rules, Mr. Declet is not an independent director because he is the Chief Executive Officer of the Company. It has also been determined that Mr. Thompson is not an independent director, having previously been Chief Executive Officer of the Company in the last three years.

Our Board has determined that Mr. Lowry, Mr. Walker, and Ms. Colón are independent under the Nasdaq Listing Rules’ independence standards for Audit Committee members. Our Board has also determined that they are independent under the Nasdaq Listing Rules independence standards for Compensation Committee members and for Governance and Nominating committee members.

Committees of the Board of Directors

Audit Committee

The Audit Committee, which currently consists of Mr. Lowry (Chair), Mr. Walker, and Ms. Colón. Each member of the Audit Committee is an independent director as defined by the rules of the SEC and Nasdaq. The Audit Committee has the sole authority and responsibility to select, evaluate and engage independent auditors for the Company. The Audit Committee reviews with the auditors and with the Company’s financial management all matters relating to the annual audit of the Company.

The Audit Committee monitors the integrity of our financial statements, monitors the independent registered public accounting firm’s qualifications and independence, monitors the performance of our internal audit function and the auditors, and monitors our compliance with legal and regulatory requirements. The Audit Committee also meets with our auditors to review the results of their audit and review of our annual and interim financial statements.

The Audit Committee plans to meet at least on a quarterly basis to discuss with management the annual audited financial statements and quarterly financial statements and meets from time to time to discuss general corporate matters.

Audit Committee Financial Expert

Our Board determined that Mr. Lowry is qualified as an Audit Committee Financial Expert, as that term is defined by the rules of the SEC, in compliance with the Sarbanes-Oxley Act of 2002.

Compensation Committee

The Compensation Committee, which currently consists of Mr. Walker (Chair), Ms. Colón, and Mr. Lowry each of whom are independent directors. Among other things, the Compensation Committee reviews, recommends and approves salaries and other compensation of the Company’s executive officers, and administers the Company’s Equity Incentive Plan (including reviewing, recommending and approving stock option and other equity incentive grants to executive officers). 

The Compensation Committee will meet in executive session to determine the compensation of the Chief Executive Officer of the Company. In determining the amount, form, and terms of such compensation, the Committee will consider the annual performance evaluation of the Chief Executive Officer conducted by the Board in light of company goals and objectives relevant to Chief Executive Officer compensation, competitive market data pertaining to Chief Executive Officer compensation at comparable companies, and such other factors as it deems relevant, and is guided by, and seeks to promote, the best interests of the Company and its shareholders.

In addition, subject to existing agreements, the Compensation Committee is authorized to determine the salaries, bonuses, and other matters relating to compensation of the executive officers of the Company using similar parameters. It may set performance targets for determining periodic bonuses payable to executive officers. It is also authorized to review and make recommendations to the Board regarding executive and employee compensation and benefit plans and programs generally, including employee bonus and retirement plans and programs (except to the extent specifically delegated to a Board appointed committee with authority to administer a particular plan). In addition, the Compensation Committee approves the compensation of non-employee directors and reports it to the full Board.

The Compensation Committee also reviews and makes recommendations with respect to shareholder proposals related to compensation matters.

The Compensation Committee may, in its sole discretion and at the Company’s cost, retain or obtain the advice of a compensation consultant, legal counsel or other adviser. The Compensation Committee is directly responsible for the appointment, compensation and oversight of the work of any compensation consultant, legal counsel and other adviser retained by the committee.

Corporate Governance and Nominating Committee

The Corporate Governance and Nominating Committee (the “Nominating Committee”), consists of Ms. Colón (Chair), Mr. Lowry, and Mr. Walker, each of whom meets the independence requirements of all other applicable laws, rules and regulations governing director independence, as determined by the Board.

The Nominating Committee has the authority to identify individuals qualified to become members of the Board, consistent with criteria approved by the Board; recommend to the Board the director nominees for the next annual meeting of shareholders at which directors are to be elected; recommend to the Board candidates to fill any vacancies on the Board; develops, recommend to the Board, and reviews the corporate governance guidelines applicable to the Company; and oversees the evaluation of the Board and management.

It is authorized to consider and recruit candidates to fill positions on the Board, including as a result of the removal, resignation or retirement of any director, an increase in the size of the Board or otherwise. The Nominating Committee has the authority to conduct, subject to applicable law, any and all inquiries into the background and qualifications of any candidate for the Board and such candidate’s compliance with the independence and other qualification requirements established by the Nominating Committee.

In selecting and recommending candidates for election to the Board or appointment to any committee of the Board, the Nominating Committee does not believe that it is appropriate to select nominees through mechanical application of specified criteria. Rather, the Nominating Committee shall consider such factors at it deems appropriate, including, without limitation, the following: personal and professional integrity, ethics and values; experience in corporate management, such as serving as an officer or former officer of a publicly-held company; experience in the Company’s industry; experience as a board member of another publicly-held company; diversity as required by the Nasdaq Rules; diversity of expertise and experience in substantive matters pertaining to the Company’s business relative to other directors of the Company; practical and mature business judgment; and composition of the Board (including its size and structure). 

The Nominating Committee will develop and recommend to the Board a policy regarding the consideration of director candidates recommended by the Company’s shareholders and procedures for submission by shareholders of director nominee recommendations.

The Nominating Committee oversees the evaluation of the Board and management. It also develops and recommends to the Board a set of corporate governance guidelines applicable to the Company, which the Nominating Committee shall periodically review and revise as appropriate. In discharging its oversight role, the Nominating Committee is empowered to investigate any matter brought to its attention.

Board and Committee Meetings in Fiscal Year 2022

In the fiscal year ended December 31, 2022, the Board had three meetings and acted on 4 occasions by unanimous consent. We did not have any Committees during 2022.

There were no directors who attended fewer than 75 percent of the number of Board meetings during the fiscal year ended December 31, 2022.

Board Diversity

While we do not have a formal policy on diversity, the Board considers diversity to include race, ethnicity, gender as well as the skill set, background, reputation, type and length of business experience of the Board members as well as a particular nominee’s contributions to that mix.  The Board believes that diversity brings a variety of ideas, judgments and considerations that benefit the Company and its shareholders.  Although there are many other factors, the Board seeks individuals with experience on operating and growing businesses.

Nasdaq’s Board Diversity Rule, which will apply to us following this Offering, requires smaller reporting companies that are listed on Nasdaq to (i) publicly disclose board-level diversity statistics using a standardized template; and (ii) have, or explain why they do not have, at least two diverse directors. The Rule also provides additional flexibility for smaller reporting companies, which can meet the diversity objective by including two female directors, and for all companies with five or fewer directors, which can meet the diversity objective by including one diverse director.

The Nasdaq Diversity Rule provides that a newly listed company must provide a Board Diversity Matrix on its website within one year of its initial listing.

Because we presently have five directors, the Nasdaq Board Diversity Rule requires that we either have one diverse director or explain why we do not. The Company has two diverse directors, Mr. Declet who self identifies as Hispanic and Ms. Colón who self identifies as both female and Hispanic.

Board Leadership Structure

Brandon Torres Declet serves as the Chairman of the Board and actively interfaces with management, the Board and counsel regularly. We have chosen to combine the Chief Executive Officer and Board Chairman positions, as we believe that this Board leadership structure is the most appropriate for the Company. Because we are a small company, it is more efficient to have the leadership of the Board in the same hands as the Chief Executive Officer. The challenges faced by us at this stage – closing the acquisition of Fat Shark and Rotor Riot and this Offering as well as implementing our business and marketing plans, integrating the acquisitions, continuing and managing our growth– are most efficiently dealt with by one person who is familiar with both the operational aspects as well as the strategic aspects of our business.

Board Risk Oversight

The Company’s risk management function is overseen by the Board. The Company’s management keeps the Board apprised of material risks and provides its directors access to all information necessary for them to understand and evaluate how these risks interrelate, how they affect us, and how management addresses those risks. Brandon Torres Declet, Chairman of the Board, works closely together with the other members of the Board when material risks are identified on how to best address such risks. If the identified risk poses an actual or potential conflict with management, the Company’s independent directors may conduct the assessment. Presently, the primary risks affecting us are our liquidity and the lack of revenue.

Family Relationships

There are no family relationships among any of our officers or directors.

Involvement in Legal Proceedings

We are not aware of any of our directors or officers being involved in any legal proceedings in the past 10 years relating to any matters in bankruptcy, insolvency, criminal proceedings (other than traffic and other minor offenses) or being subject to any of the items set forth under Item 401(f) of Regulation S-K of the SEC.

Code of Ethics

The Board has adopted a Code of Business Conduct and Ethics (the “Code of Ethics”) that applies to all of the Company’s employees, including the Company’s Chief Executive Officer and Chief Financial Officer. Although not required, the Code of Ethics also applies to the Company’s directors. The Code of Ethics provides written standards that we believe are reasonably designed to deter wrongdoing and promote honest and ethical conduct, including the ethical handling of actual or apparent conflicts of interest between personal and professional relationships, full, fair, accurate, timely and understandable disclosure and compliance with laws, rules and regulations and the prompt reporting of illegal or unethical behavior, and accountability for adherence to the Code of Ethics. 

EXECUTIVE AND DIRECTOR COMPENSATION 

Summary Compensation Table

The following table sets forth information concerning all cash and non-cash compensation awarded to, earned by or paid to our Chief Executive Officer, two most highly paid executive officers with compensation exceeding $100,000 during the fiscal years ended December 31, 2022 and 2021, and two additional individuals for whom the foregoing would apply but for the fact that they were not executive officers of the Company as of December 31, 2022 (each a “Named Executive Officer”).

(1) Mr. Thompson served as the Company’s Chief Executive Officer from July 2019 to May 2022, when he replaced in such role by Brandon Torres Declet. Mr. Thompson is also the Chief Executive Officer and a director of Red Cat.

(2) Mr. Declet was appointed Chief Executive Officer in May 2022 and did not serve during the 2021 fiscal year.

Fat Shark and Rotor Riot Summary Compensation Information

Set forth below is summary compensation information similar to that set forth above, but reflecting amounts paid, payable or allocable to Fat Shark or Rotor Riot for executive officers of one or both of those entities who exceeded the enumerated threshold and which the Company anticipates hiring as an executive officer of the Company (directly or through Fat Shark or Rotor Riot) in connection with the acquisition of those entities in the Business Combination (the “Business Combination Officers”). See “The Business Combination” for more information.

_________________

(1) Represents principal position(s) held at Red Cat, Fat Shark and/or Rotor Riot.

(2) Represents the aggregate grant date fair value computed in accordance with FASB ASC Topic 718 of 10-year options to purchase 100,000 shares of Red Cat common stock at an exercise price of $2.60, which become fully vested on June 7, 2024.

2022 Equity Incentive Plan

Effective October 1, 2022, the Board approved the Company’s 2022 Equity Incentive Plan (the “Plan). The Plan provides for the award of restricted stock units, stock options (incentive and non-qualified), stock awards and stock appreciation rights to officers, directors, employees and consultants who provide services to the Company.

The Company has reserved 1,496,391 shares of common stock for issuance under the Plan, which represents approximately 10% of the outstanding common stock on a fully-diluted basis after giving effect to the exercise and conversion of all outstanding stock which may be issued outside of the Plan including preferred stock, the Senior Note, to the extent issued, and warrants and giving effect to this Offering and Business Combination, assuming no over-allotment option is exercised by the underwriter(s). This number will increase to the extent of any future issuances of common stock or derivative securities following this Offering. The Board may terminate the Plan at any time. Unless sooner terminated, the Plan will terminate ten years after the effective date of the Plan. The number of shares of common stock covered by each outstanding stock right, and the number of shares of common stock which have been authorized for issuance under the Plan as well as the price per share of common stock (or cash, as applicable) covered by each such outstanding option or SAR, shall be proportionately adjusted for any increases or decrease in the number of issued shares of common stock resulting from a stock split, reverse stock split, stock dividend, combination or reclassification, or any other increase or decrease in the number of issued shares of common stock effected without receipt of consideration by the Company.

Employment Agreements

Employment Agreement with Brandon Torres Declet, Chief Executive Officer and Chairman

The Employment Agreement with Mr. Declet effective January 1, 2023 provides that he will serve as our Chief Executive Officer of the Company, on an at will basis. Pursuant to his Employment Agreement, Mr. Declet receives an annual base salary of $250,000. In addition, Mr. Declet’s Employment Agreement entitles him to the following:

Additionally, under his Employment Agreement, if Mr. Declet is terminated by the Company without Cause or terminates his employment for Good Reason, he will be entitled to six months’ annual base salary and COBRA premiums, as well as accelerated vesting of 50% of the then unvested RSUs, if applicable.

For this purpose, Good Reason is generally defined as (i) any reduction in his base salary, (ii) any material diminution of his authorities, titles or offices, (iii) being required to report to anyone other than the Board of Directors, (iv) a request by the Company to relocate, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Cause is generally defined as (i) failure to perform his material duties under the Employment Agreement, following 30 days’ written notice without cure, (ii) willful misconduct or gross negligence or breach of a fiduciary duty owed to the Company, (iii) conviction of our guilty pleas to a felony or other criminal offense involving moral turpitude, (iv) any act or omission involving dishonesty, disloyalty, or fraud causing or reasonably expected to cause significant economic harm to the Company, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Mr. Declet’s Employment Agreement will be reviewed by our Board of Directors upon the consummation of this Offering.

Employment Agreement with Brian Hoff, Chief Financial Officer

The Employment Agreement with Mr. Hoff effective November 1, 2022 provides that he will serve as the Chief Financial Officer of the Company on an at will basis. Pursuant to his Employment Agreement, Mr. Hoff receives an annual base salary of $250,000. In addition, Mr. Hoff’s Employment Agreement entitles him to the following:

Additionally, under his Employment Agreement, if Mr. Hoff is terminated by the Company without Cause or terminates his employment for Good Reason, he will be entitled to six months’ annual base salary and COBRA premiums, as well as accelerated vesting of 50% of the then unvested RSUs, if applicable.

For this purpose, Good Reason is generally defined as (i) any reduction in his base salary, (ii) any material diminution of his authorities, titles or offices, (iii) being required to report to anyone other than the Chief Executive Officer, (iv) a request by the Company to relocate, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Cause is generally defined as (i) failure to perform his material duties under the Employment Agreement, following 30 days’ written notice without cure, (ii) willful misconduct or gross negligence or breach of a fiduciary duty owed to the Company, (iii) conviction of our guilty pleas to a felony or other criminal offense involving moral turpitude, (iv) any act or omission involving dishonesty, disloyalty, or fraud causing or reasonably expected to cause significant economic harm to the Company, or (v) material breach of his Employment Agreement without cure after 30 days’ written notice.

Director Compensation

To date, we have not paid our non-employee directors any compensation for services on our Board. Following the Business Combination we anticipate granting our non-employee directors a quarterly grant cash and/or restricted stock units, or RSUs commencing upon the consummation of this Offering.

Employee Benefit Plans

The Company currently has a 2022 Equity Incentive Plan, a 401(k) plan, and will adopt the medical, dental, and vision coverage that is currently offered to Rotor Riot’s employees for the Company’s employees upon closing of the Business Combination.

RELATED PARTY TRANSACTIONS

The following is a description of transactions since January 1, 2020, to which we were a party or will be party, in which the amount involved exceeded or will exceed the lesser of $120,000 or 1% of the average of our total assets at year-end for the last two completed fiscal years, and any of our directors, executive officers or holders of more than 5% of our outstanding capital stock, or any immediate family member of, or person sharing the household with, any of these individuals or entities, had or will have a direct or indirect material interest. As permitted by the SEC rules, discussion of employment relationships or transactions involving the Company’s executive officers and directors, and compensation solely resulting from such employment relationships or transactions, or service as a director of the Company, as the case may be, has been omitted to the extent disclosed in the Executive Compensation or the Director Compensation section of this Prospectus, as applicable.

On September 10, 2021, our founder and former Chief Executive Officer Jeffrey Thompson subscribed for 2,400,000 shares of our common stock for a total subscription price of $24,000. For more information on the private offering to which this related, see “Recent Sales of Unregistered Securities.” Mr. Thompson subsequently subscribed for an additional 52,000 shares of our common stock on September 14, 2021 for an additional $26,000.

In November 2022 we entered into the Purchase Agreement with Red Cat and Jeffrey Thompson, the Company’s former Chief Executive Officer and President and current director, pursuant to which, among other things, Mr. Thompson and the Company have agreed to indemnification obligations, which shall survive for a period of nine months, subject to certain limitations, which includes a basket of $250,000 before any claim can be asserted and a cap equal to the value of the Escrow Shares, other than in cases involving fraud. Mr. Thompson agreed to deposit 450,000 shares of our common stock owned by him, which we refer to herein as the “Escrow Shares,” in to escrow to secure any indemnification obligations, which stock is our sole remedy, except for fraud.

In November 2020, Red Cat acquired Fat Shark Holdings for a total purchase price of $8.4 million. In January 2020, Red Cat acquired Rotor Riot for a total purchase price was $2.0 million.

Since July 2017, Fat Shark has used Shenzhen Fatshark Co, Ltd., referred to herein as the “Supplier,” a drone manufacturing company located in Shenzhen, China, as its primary contract manufacturer for Fat Shark’s drone products. In exchange for the Supplier’s manufacturing services with respect to these products, Fat Shark pays the Supplier amounts equal to 115% of the sum of the bill of material and the labor costs for such production. Ms. Molly Mo, a majority owner of the Supplier is the wife of Greg French, the founder and a consultant of Fat Shark. Since January 1, 2020, Fat Shark has paid or accrued a total of $12,261,440 in purchase orders to the Supplier. As of January 31, 2023, Fat Shark owed the related party Supplier $231,000, which does not include unfilled purchase orders of approximately $1.2 million.

PRINCIPAL STOCKHOLDERS

The following table lists, based on amounts outstanding as of March 7, 2023 (before the Offering) and estimated amounts to be outstanding after the Offering (based on certain assumptions described below), the number of shares of common stock beneficially owned by (i) each person, entity or group (as that term is used in Section 13(d)(3) of the Exchange Act) known to the Company to be the beneficial owner of more than 5% of the outstanding common stock; (ii) each of our directors (iii) each of our named executive officers and the executive officers of Fat Shark and Rotor Riot as described under “Executive Compensation,” and (iv) all executive officers and directors as a group. Information relating to beneficial ownership of common stock by our principal stockholders and management is based upon information furnished by each person using “beneficial ownership” concepts under the rules of the SEC. Under these rules, a person is deemed to be a beneficial owner of a security if that person directly or indirectly has or shares voting power, which includes the power to vote or direct the voting of the security, or investment power, which includes the power to dispose or direct the disposition of the security. The person is also deemed to be a beneficial owner of any security of which that person has a right to acquire beneficial ownership within 60 days. Under the SEC rules, more than one person may be deemed to be a beneficial owner of the same securities, and a person may be deemed to be a beneficial owner of securities as to which he or she may not have any pecuniary interest. Except as noted below, each person has sole voting and investment power with respect to the shares beneficially owned and each shareholder's address is c/o Unusual Machines, Inc., 151 Calle De San Francisco, Ste 200 PMB 2106, San Juan, PR 00901-1607.

Applicable percentage ownership before the Offering is based on 6,934,500 shares of common stock outstanding as of the date stated above and excludes for this purpose shares of common stock issuable upon conversion of the Series A and Senior Note to be issued by the Company to Red Cat upon the closing of the Business Combination which will occur simultaneously with or immediately prior to this Offering. The Series A and Senior Note are each subject to beneficial ownership limitations, as more fully described under “The Business Combination.”

Applicable percentage ownership after the Offering is based on the issuance of _______ shares of common stock in this Offering (based on $___ per share (the mid –point of the range) and excludes ________ shares of common stock issuable if the underwriter exercises its option to purchase additional shares.

*Less than 1%

(1) The amount of shares beneficially owned by Mr. Thompson before the Offering only includes shares of the Company’s common stock personally owned by Mr. Thompson. Mr. Thompson is the Chief Executive Officer of Red Cat. Does not include the shares of common stock issuable upon conversion of the Series A and Senior Note to be issued to Red Cat in the Business Combination, which are subject to beneficial ownership limitations. We have been informed by Red Cat’s counsel that Mr. Thompson is not deemed to be the beneficial owner of the shares beneficially owned by Red Cat. Address is 15 Ave. Munoz Rivera Ste 2200, San Juan, PR 00901.

(2) Address is 295 Palmas Inn Way, Ste 104 PMB 115, Humacao, PR 00791.

(3) Address is 145 Sandy Hook Rd N, Sarasota, FL 34242.

(4) Address is 463 Adams St, Denver, CO 80206. Jonathan Honig has the power to sell and vote common stock owned by Eleven Ventures.

Change-in-Control Agreements

The Company does not have any change-in-control agreements with any of its executive officers.

DESCRIPTION OF SECURITIES

Our authorized capital stock consists of 500,000,000 shares of common stock, par value $0.01 per share, of which 6,934,500 shares are outstanding as of March 7, 2023, and 10,000,000 shares of “blank check” preferred stock, par value $0.01 per share, of which no shares are outstanding, as of the date of this Prospectus.

The following description summarizes the material terms of our securities, which does not purport to be complete and is qualified in its entirety by reference to our Amended and Restated Articles of Incorporation, and the Certificate of Designation setting forth the terms of our authorized series of preferred stock, each of which are filed as an exhibit to the Registration Statement of which this Prospectus is a part, and to the applicable provisions of Puerto Rican law, including the Puerto Rico General Corporate Act.

Common Stock

The holders of our common stock are entitled to one vote for each share held of record on all matters submitted to a vote of the stockholders and do not have cumulative voting rights. Accordingly, holders of a majority of the shares of outstanding common stock entitled to vote in any election of directors may elect all of the directors standing for election, subject to any voting rights of any preferred. Subject to preferences that may be applicable to any outstanding shares of preferred stock, the holders of common stock are entitled to receive ratably such dividends as may be declared by the Board out of funds legally available therefor. Upon the liquidation, dissolution or winding up of the Company, holders of our common stock are entitled to share ratably in all assets remaining after payment of liabilities and the liquidation preferences of any outstanding shares of preferred stock. Holders of common stock have no preemptive rights and no right to convert their common stock into any other securities. Our common stock has no redemption or sinking fund provisions. The rights, preferences and privileges of the holders of the common stock are subject to, and may be adversely affected by, the rights of the holders of shares of any series of our preferred stock that the Board may designate and issue in the future. All outstanding shares of common stock are fully paid and non-assessable.

“Blank Check” Preferred Stock

Pursuant to our Articles of Incorporation, our Board has the authority, without further action by the stockholders, to issue up to 10,000,000 shares of preferred stock, in one or more series. Our Articles of Incorporation provide that our Board has the authority, without further action by the shareholders, to designate and issue shares of preferred stock in one or more series and to fix the rights, preferences, privileges and restrictions granted to or imposed upon the preferred stock. Preferred stock may be designated and issued without authorization of shareholders unless such authorization is required by applicable law, the rules of the principal market or other securities exchange on which our stock is then listed or admitted to trading.

Our Board may authorize the issuance of preferred stock with voting or conversion rights that could adversely affect the voting power or other rights of the holders of common stock. The issuance of preferred stock, while providing flexibility in connection with possible acquisitions and other corporate purposes could, under some circumstances, have the effect of delaying, deferring or preventing a change in control of the Company. 

Series A Convertible Preferred Stock

We expect to issue 2,675,000 shares of Series A upon the closing of the Business Combination, which subject to the other closing conditions will occur simultaneously with this Offering. The material terms of the Series A are summarized elsewhere in this Prospectus under “The Business Combination.”

Series B Convertible Preferred Stock

We have 140 outstanding shares of Series B Convertible Preferred Stock (the “Series B”). Each share of Series B is convertible into 10,000 shares of our common stock at the election of the holder, subject to a 4.99% beneficial ownership limitation which may be increased to up to 9.99% upon 61 days’ written notice from the holder. The Series B is non-voting and has no other special rights other than the conversion feature.

Convertible Note

We expect to issue the Senior Note upon the closing of the Business Combination, which subject to the other closing conditions will occur simultaneously with this Offering. The material terms of the Senior Note are summarized elsewhere in this Prospectus under “The Business Combination.”

Anti-Takeover Effects of Provisions of our Articles of Incorporation, our Bylaws and Puerto Rico Law

Certain provisions in our Amended and Restated Articles of Incorporation and Bylaws summarized below may be deemed to have an anti-takeover effect and may delay, deter or prevent a tender offer or takeover attempt that a stockholder might consider to be in its best interests, including attempts that might result in a premium being paid over the market price for the shares held by stockholders.

“Blank Check” Preferred Stock.

Under our Articles of Incorporation the Board may authorize the issuance of one or more series of preferred stock with such rights, preferences and limitations as the Board may determine, including voting or conversion rights that could adversely affect the voting power or other rights of the holders of our common stock. The issuance of preferred stock, while providing flexibility in connection with possible acquisitions and other corporate purposes could, under some circumstances, have the effect of delaying, deferring or preventing a change in control of the Company.

Advance Notice Requirements for Stockholder Proposals and Director Nominations.

Our Bylaws will provide that, stockholders seeking to bring business before an annual meeting of stockholders, or to nominate candidates for election as directors at an annual meeting of stockholders, must provide timely notice thereof in writing. To be timely, a stockholder’s notice generally must be delivered to and received at our principal executive offices not less than 90 days nor more than 120 days prior to the first anniversary of the preceding year’s annual meeting; provided, that, in the event that the date of such meeting is advanced more than 30 days prior to, or delayed by more than 60 days after, the anniversary of the preceding year’s annual meeting of our stockholders, a stockholder’s notice to be timely must be so delivered not earlier than the close of business on the 120th day prior to such meeting and not later than the close of business on the later of the 90th day prior to such meeting or the 10th day following the day on which public announcement of the date of such meeting is first made. Our Bylaws also will specify certain requirements as to the form and content of a stockholder’s notice. These provisions may preclude stockholders from bringing matters before an annual meeting of stockholders or from making nominations for directors at an annual meeting of stockholders.

Special Meeting Limitations

Under our Bylaws, special meetings of the stockholders may be called only by (i) our Board, or (ii) a holder of at least 20% of the shares entitled to vote at the meeting.

Transfer Agent and Registrar

The transfer agent and registrar for our common stock is Equity Stock Transfer.

UNDERWRITING

Subject to the terms and conditions set forth in the underwriting agreement, dated            , 2023 between us and _________, as representative of the underwriters named below, or the “Representative,” and the sole book-running manager of this offering, we have agreed to sell to the underwriters, and each of the underwriters has agreed, severally and not jointly, to purchase from us, the shares of common stock shown opposite its name below:

Under the terms of the underwriting agreement, the underwriters are committed to purchase all of the shares offered by this prospectus (other than the shares subject to the underwriters’ option to purchase additional shares), if the underwriters buy any of such shares. The underwriting agreement provides that the obligations of the several underwriters are subject to certain conditions precedent such as the receipt by the underwriters of officers’ certificates and legal opinions and approval of certain legal matters by their counsel. We have agreed to indemnify the underwriters and certain of their controlling persons against certain liabilities, including liabilities under the Securities Act, and to contribute to payments that the underwriters may be required to make in respect of those liabilities.

The underwriters are offering the shares, subject to prior sale, when, as and if issued to and accepted by them, subject to approval of legal matters by their counsel, including the validity of the shares, and other conditions contained in the underwriting agreement, such as the receipt by the underwriters of officer’s certificates and legal opinions. The underwriters reserve the right to withdraw, cancel or modify offers to the public and to reject orders in whole or in part.

Option to Purchase Additional Shares

We have granted to the underwriters an option, exercisable for 45 days from the date of this Prospectus, to purchase, from time to time, in whole or in part, up to an aggregate of _____ shares from us at the public offering price set forth on the cover page of this prospectus, less underwriting discounts and commissions. If the underwriters exercise this option, each underwriter will be obligated, subject to certain conditions, to purchase a number of additional shares approximately proportionate to that underwriter’s initial purchase commitment as indicated in the table above.

Commission and Expenses

The underwriters have advised us that they propose to offer the shares of common stock to the public at the public offering price set forth on the cover page of this prospectus and to certain dealers, which may include the underwriters, at that price less a concession not in excess of _____ per share of common stock. The underwriters may allow, and certain dealers may reallow, a discount from the concession not in excess of _____ per share of common stock to certain brokers and dealers. After the initial offering, the underwriters may change the offering price and other selling terms.

We have paid _________, a $50,000 advance upon the execution of the Letter of Engagement between us and _________, dated March 2, 2023 (as amended), to be credited against the accountable expenses actually incurred by _________ in connection with this Offering. To the extent that the accountable expenses actually incurred by _________ in connection with this Offering amount to less than $_____, the difference will be reimbursed to us in compliance with FINRA Rule 5110(g)(4)(A).

Underwriter’s Warrants

We have agreed to issue warrants to _________ to purchase a number of shares equal to five percent (5%) of the total number of shares sold in this Offering at an exercise price equal to 125% of the public offering price of the shares sold in this Offering. Underwriter’s Warrants will be exercisable 180 days from the commencement date of sales in this Offering, will have a cashless exercise provision and will terminate on the fifth anniversary of the commencement date of sales in this Offering. Underwriter’s Warrants will provide for immediate “piggyback” registration rights with respect to the registration of the common stock underlying the Warrants. Underwriter’s Warrants will also provide for customary anti-dilution provisions for stock dividends, splits, mergers, and any future issuance of ordinary shares or ordinary shares equivalents at prices (or with exercise and/or conversion prices) below the exercise price. Underwriter’s Warrants shall also provide for automatic exercise immediately prior to expiration. Underwriter’s Warrants shall not be callable or cancellable. We are registering the sale of Underwriter’s Warrants and the shares underlying Underwriter’s Warrants in this Offering.

Underwriter’s Warrants and the underlying shares may be deemed to be compensation by FINRA, and therefore will be subject to FINRA Rule 5110(e)(1). In accordance with FINRA Rule 5110(e)(1), neither Underwriter’s Warrants nor any of our ordinary shares issued upon exercise of Underwriter’s Warrants may be sold, transferred, assigned, pledged or hypothecated, or be the subject of any hedging, short sale, derivative, put or call transaction that would result in the effective economic disposition of such securities by any person, for a period of 180 days immediately following the commencement date of sales in this Offering, subject to certain exceptions. Underwriter’s Warrants to be received by _________ and related persons in connection with this Offering: (i) fully comply with lock-up restrictions pursuant to FINRA Rule 5110(e)(1); and (ii) fully comply with transfer restrictions pursuant to FINRA Rule 5110(e)(2).

Right of First Refusal

For a period of twenty-four (24) months from the Closing, the Company will grant to _________ an irrevocable right of first refusal to act as sole investment banker, sole book-runner and/or sole placement agent, at _________’s sole discretion, for each and every future public and private equity and debt offering, including all equity linked financings, during such twenty-four (24) month period for the Company, or any successor to or any subsidiary of the Company, on terms customary to _________. _________, shall have the sole right to determine whether or not any other broker-dealer shall have the right to participate in any such offering and the economic terms of any such participation.

The following table shows the public offering price, the underwriting discounts and commissions that we are to pay the underwriters and the proceeds, before expenses, to us in connection with this Offering. Such amounts are shown assuming both no exercise and full exercise of the underwriters’ option to purchase additional shares.

We estimate expenses payable by us in connection with this Offering, other than the underwriting discounts and commissions referred to above, will be approximately $_____. To the extent that the accountable expenses actually incurred by the _________ in connection with this Offering amount to less than $_____, the difference will be reimbursed to us in compliance with FINRA Rule 5110(g)(4)(A). We have agreed to reimburse the _________ up to $125,000 for their fees and expenses of legal counsel and other out-of-pocket expenses, roadshow expenses and cost of background checks. We have also agreed to reimburse the _________ for certain of their expenses incurred in connection with the offering’s settlement and closing in an amount not to exceed $30,000. Such reimbursed fees and expenses, as set forth in the underwriting agreement, are deemed underwriting compensation for this Offering by FINRA.

Listing

We have applied to list our common stock on the Nasdaq Capital Market under the symbol “UMAC.” The approval of our common stock for listing on Nasdaq is a condition to the closing of this Offering.

No Sales of Similar Securities

We, our officers and our directors have agreed, subject to certain specified exceptions, not to directly or indirectly, for a period of 8 months after the date of the underwriting agreement, or 6 months in case of any other holder of outstanding securities, after the date of the underwriting agreement, in the case of our officers and directors:

In addition, we and each such person agrees that, without the prior written consent of the underwriters, we or such other person will not, during the restricted period, make any demand for, or exercise any right with respect to, the registration of any shares of common stock or any security convertible into or exercisable or exchangeable for common stock.

The underwriters may, in their sole discretion and at any time or from time to time before the termination of the 8 months or 6 months periods release all or any portion of the securities subject to lock-up agreements.

Subject to compliance with the notification requirements under FINRA Rule 5131 applicable to lock-up agreements with our directors or officers, if the underwriters, with our prior consent, agree to release or waive the restrictions set forth in a lock-up agreement with one of our directors or officers and provides us with notice of the impending release or waiver at least three business days before the effective date of the release or waiver, we agree to announce the impending release or waiver by a press release through a major news service at least two business days before the effective date of the release or waiver.

Market Making, Stabilization and Other Transactions

The underwriters may make a market in the common stock as permitted by applicable laws and regulations. However, the underwriters are not obligated to do so, and the underwriters may discontinue any market-making activities at any time without notice in their sole discretion. Accordingly, no assurance can be given as to the liquidity of the trading market for the common stock, that you will be able to sell any of the common stock held by you at a particular time or that the prices that you receive when you sell will be favorable.

The underwriters have advised us that they, pursuant to Regulation M under the Securities Exchange Act of 1934, as amended, and certain persons participating in the offering, may engage in short sale transactions, stabilizing transactions, syndicate covering transactions or the imposition of penalty bids in connection with this offering. These activities may have the effect of stabilizing or maintaining the market price of the common stock at a level above that which might otherwise prevail in the open market. Establishing short sales positions may involve either “covered” short sales or “naked” short sales.

“Covered” short sales are sales made in an amount not greater than the underwriters’ option to purchase additional shares of our common stock in this Offering. The underwriters may close out any covered short position by either exercising their option to purchase additional shares of our common stock or purchasing shares of our common stock in the open market. In determining the source of shares to close out the covered short position, the underwriters will consider, among other things, the price of shares available for purchase in the open market as compared to the price at which they may purchase shares through the option to purchase additional shares.

“Naked” short sales are sales in excess of the option to purchase additional shares of our common stock. The underwriters must close out any naked short position by purchasing shares in the open market. A naked short position is more likely to be created if the underwriters are concerned that there may be downward pressure on the price of the shares of our common stock in the open market after pricing that could adversely affect investors who purchase in this Offering.

A stabilizing bid is a bid for the purchase of shares of common stock on behalf of the underwriters for the purpose of fixing or maintaining the price of the common stock. A syndicate covering transaction is the bid for or the purchase of shares of common stock on behalf of the underwriters to reduce a short position incurred by the underwriters in connection with the offering. Similar to other purchase transactions, the underwriters’ purchases to cover the syndicate short sales may have the effect of raising or maintaining the market price of our common stock or preventing or retarding a decline in the market price of our common stock. As a result, the price of our common stock may be higher than the price that might otherwise exist in the open market. A penalty bid is an arrangement permitting the underwriters to reclaim the selling concession otherwise accruing to a syndicate member in connection with the offering if the common stock originally sold by such syndicate member are purchased in a syndicate covering transaction and therefore have not been effectively placed by such syndicate member.

Neither we, nor any of the underwriters make any representation or prediction as to the direction or magnitude of any effect that the transactions described above may have on the price of our common stock. The underwriters are not obligated to engage in these activities and, if commenced, may end any of these activities at any time.

Passive Market Making

The underwriters may also engage in passive market making transactions in our common stock on the NASDAQ in accordance with Rule 103 of Regulation M during a period before the commencement of offers or sales of shares of our common stock in this Offering and extending through the completion of distribution. A passive market maker must display its bid at a price not in excess of the highest independent bid of that security. However, if all independent bids are lowered below the passive market maker’s bid, that bid must then be lowered when specified purchase limits are exceeded. Passive market making may cause the price of our common stock to be higher than the price that otherwise would exist in the open market in the absence of those transactions. The underwriters are not required to engage in passive market making and, if commenced, may end passive market making activities at any time.

Electronic Distribution

A prospectus in electronic format may be made available by e-mail or on the web sites or through online services maintained by one or more of the underwriters, selling group members (if any) or their affiliates. The underwriters may agree with us to allocate a specific number of shares of common stock for sale to online brokerage account holders. Any such allocation for online distributions will be made by the underwriters on the same basis as other allocations. Other than the prospectus in electronic format, the information on the underwriters’ web sites and any information contained in any other web site maintained by any of the underwriters is not part of this prospectus, has not been approved and/or endorsed by us or the underwriters and should not be relied upon by investors.

Other Activities and Relationships

The underwriters and certain of their respective affiliates are full service financial institutions engaged in a wide range of activities for their own accounts and the accounts of customers, which may include, among other things, corporate finance, mergers and acquisitions, merchant banking, equity and fixed income sales, trading and research, derivatives, foreign exchange, futures, asset management, custody, clearance and securities lending. The underwriters and certain of their affiliates have, from time to time, performed, and may in the future perform, various investment banking and financial advisory services for us and our affiliates, for which they received or will receive customary fees and expenses.

In addition, in the ordinary course of its business, the underwriters and their respective affiliates may, directly or indirectly, hold long or short positions, trade and otherwise conduct such activities in or with respect to debt or equity securities and/or bank debt of, and/or derivative products. Such investment and securities activities may involve our securities and instruments. The underwriters and their respective affiliates may also make investment recommendations or publish or express independent research views in respect of such securities or instruments and may at any time hold, or recommend to clients that they acquire, long or short positions in such securities and instruments.

Stamp Taxes

If you purchase shares of common stock offered in this prospectus, you may be required to pay stamp taxes and other charges under the laws and practices of the country of purchase, in addition to the offering price listed on the cover page of this prospectus.

LEGAL MATTERS

The validity of the securities being offered by this Prospectus will be passed upon for us by Nason, Yeager, Gerson, Harris & Fumero, P.A., Palm Beach Gardens, Florida, Carmel, Milazzo & Feil LLP, New York, New York is acting as counsel to the underwriters.

EXPERTS

The consolidated financial statements of the Company as of December 31, 2022 and 2021, and as of April 30, 2022 and 2021 for Fat Shark and Rotor Riot, and for the years then ended, included in this Prospectus have been so included in reliance on the report of BF Borgers, CPA, PC an independent registered public accounting firm, which includes an explanatory paragraph about the Company’s ability to continue as a going concern, given on the authority of said firm as experts in auditing and accounting.

INTERESTS OF NAMED EXPERTS AND COUNSEL

None.

WHERE YOU CAN FIND MORE INFORMATION

We have filed with the SEC this registration statement on Form S-1 under the Securities Act with respect to the shares of common stock being offered by this Prospectus. This Prospectus, which constitutes a part of this registration statement, does not contain all of the information in this registration statement and its exhibits. For further information with respect to us and the common stock offered by this Prospectus, you should refer to this registration statement and the exhibits filed as part of that document. Statements contained in this Prospectus as to the contents of any contract or any other document referred to are not necessarily complete, and in each instance, we refer you to the copy of the contract or other document filed as an exhibit to this registration statement. Each of these statements is qualified in all respects by this reference.

Upon completion of this Offering, we will be subject to the informational requirements of the Exchange Act and will file annual, quarterly and current reports, proxy statements and other information with the SEC. You can read our SEC filings, including the registration statement, at the SEC’s website at www.sec.gov. We also maintain a website at https://unusualmachines.com/investors and upon completion of this Offering, you may access, free of charge, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports, as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. The information contained on, or that can be accessed through, our website is not a part of this prospectus. Upon completion of this Offering, you may also request a copy of these filings, at no cost, by writing or telephoning us at: Unusual Machines, Inc., 151 Calle De San Francisco, Ste 200 PMB 2106 San Juan, Puerto Rico 00901-1607 or contacting us at +1 855-921-4600.

UNUSUAL MACHINES, INC.

INDEX TO FINANCIAL STATEMENTS

UNAUDITED PRO FORMA

CONDENSED COMBINED FINANCIAL STATEMENTS

The pro forma adjustments related to the Share Purchase Agreement are described in the notes to the unaudited pro forma combined financial information and principally include the following:

The adjustments to fair value and the other estimates reflected in the accompanying unaudited pro forma condensed consolidated financial statements may be materially different from those reflected in the combined company’s consolidated financial statements subsequent to the Share Purchase. In addition, the unaudited pro forma condensed combined financial statements do not purport to project the future financial position or results of operations of the combined companies. Reclassifications and adjustments may be required if changes to Fat Shark’s and Rotor Riot’s financial presentation are needed to conform Fat Shark’s and Rotor Riot’s accounting policies to the accounting policies of Unusual Machines, Inc.

These unaudited pro forma condensed combined financial statements do not give effect to any anticipated synergies, operating efficiencies or cost savings that may be associated with the Share Purchase Agreement or Initial Public Offering. These financial statements also do not include any integration costs the companies may incur related to the transactions as part of combining the operations of the companies.

UNAUDITED PRO FORMA CONDENSED COMBINED BALANCE SHEETS